Olympus Camera Tg 620 Ihs Instruction Manual

							41EN
Menus for Playback, Editing, and Printing FunctionsMenus for Playback, Editing, and Printing Functions
  The default settings of the function are highlighted in .  Data must be created with the ib (PC software) before using some functions.
  Refer to the ib (PC software) help guide for details on how to use the ib (PC software).
  For details on installing the ib (PC software), see “Installing the PC software and registering user”
(p. 14).
Playing back pictures automatically Playing back pictures automatically [Slideshow][Slideshow]
q (Playback Menu)   Slideshow
Submenu 2 Submenu 3 Application
Slide
All/Event/
Collection*1Selects the content 
to be included in the 
slideshow.
BGM
Off/Cosmic/
Breeze/
Mellow/
Dreamy/
Urban Selects the background 
music options.
Type
Normal/Fader/
ZoomSelects the type of 
transition effect used 
between slides.
Start ―Starts the slideshow.
*1  The [Collection] that has been created with the ib (PC 
software) and imported back from a computer can play 
back.
  During a slideshow, press  I to advance one frame, 
H to go back one frame.
Searching for images and playing back Searching for images and playing back the related images [Photo Surfi  ng]the related images [Photo Surfi ng]
q (Playback Menu)   Photo Surfi ng
In [Photo Surfi  ng], images can be searched and related 
images can be played back by selecting the related items.
To start [Photo Surfi  ng]To start [Photo Surfi ng]Press the A button to start [Photo Sur fi ng].
When a related item of the image displayed is selected 
with FG, images related to the item are displayed in the 
lower part of the monitor. Use  HI to display an image.
To select related items that are not displayed, press the 
A button when selecting an item.
To stop [Photo Surfi  ng], use FG to select [ALL], and 
press the A button.
Related items
Images corresponding the 
related items35ºN139ºE35ºN
139ºE
2012/02/262012/
02/26ALLALL
Using the ib (PC software) and Using the ib (PC software) and importing data back to the cameraimporting data back to the camera  Refer to the ib (PC software) help guide for details on 
how to use the ib (PC software).
  The ib (PC software) may not work properly on the pictures edited by other application software. 
						

							42EN
  The following [Photo Surfi ng] functions can be 
performed when data created with the ib (PC 
software) is imported back to the camera.
Information of persons or shooting locations and new 
Collections can be added in the related items.
Changing the image size [Changing the image size [QQ]]
q (Playback Menu)   Edit  Q
Submenu 3 Application
 640×480This saves a high-resolution image 
as a separate image with a smaller 
size for use in e-mail attachments 
and other applications.
 320×240
1 Use  HI to select an image.
2 Use  FG to select an image size and press the  A 
button.
 
●The resized image is saved as a separate image.
Cropping image [Cropping image [PP]]
q (Playback Menu)   Edit  P
1 Use HI to select an image, and press the  A button.
2  Use the zoom lever to select the size of the cropping  frame, and use FGHI to move the frame.
Cropping frame
MENUBack
3 Press the  A button after you have selected the area 
to trim.
 
●The edited image is saved as a separate image.
Adding sound to still images [Adding sound to still images [RR]]
q (Playback Menu)   Edit  R
1 Use HI to select an image.
2  Aim the microphone toward the sound source.
Microphone TG-620
TG-820
3 Press the  A button. 
●Recording starts. 
●The camera adds (records) sound for approx. 
4 seconds while playing back the image.
Retouching faces on still images Retouching faces on still images [Beauty Fix][Beauty Fix]
q (Playback Menu)   Edit  Beauty Fix
  Depending on the picture, the editing may not be 
effective.
1 Use  HI to select an image, and press the  Q button.
2 Use  FG to select a retouching item, and press the 
Q button.
3  Select [OK] or [Beauty Fix] on the review screen, and  press the Q button to save or to retouch the image 
additionally. 
						

							43EN
 
●The retouched image is saved as a separate 
image.
OKBeauty FixMENUBack
  The [Image Size] (p. 33) of the retouched image is 
limited to [n] or lower. 
Beauty FixBeauty Fix1  Select a retouching item, and press the  Q button.
MENU
Off
Eye ColorBack
2 Press the Q button on the review screen.
Brightening areas that are dark Brightening areas that are dark due to backlight or other reasons due to backlight or other reasons [Shadow Adj][Shadow Adj]
q (Playback Menu)   Edit  Shadow Adj
1 Use HI to select an image, and press the  A button. 
●The edited image is saved as a separate image.  Depending on the picture, the editing may not be 
effective.
  The retouching process may lower the image resolution.
Retouching red eyes in fl  ash shooting Retouching red eyes in fl ash shooting [Redeye Fix][Redeye Fix]
q (Playback Menu)   Edit  Redeye Fix
1 Use HI to select an image, and press the  A button. 
●The edited image is saved as a separate image.  Depending on the picture, the editing may not be 
effective.
  The retouching process may lower the image resolution.
Rotating images [Rotating images [yy]]
q (Playback Menu)   Edit  y
1 Use HI to select an image.
2 Press the  A button to rotate the image.
3  If necessary, repeat Steps 1 and 2 to make settings  for other images, and press the  button.
  The new picture orientations will be saved even after the power is turned off.
Erasing images [Erase]Erasing images [Erase]
q (Playback Menu)   Erase
Submenu 2 Application
All Erase All images in the internal memory or 
card will be erased.
Sel. Image Images are individually selected and 
erased.
Erase
Deletes the image displayed.
  When erasing pictures in the internal memory, do not 
insert the card into the camera. 
  Protected images cannot be erased. 
						

							44EN
To individually select and erase images To individually select and erase images [Sel. Image][Sel. Image]1 Use FG to select [Sel. Image], and press the 
A button.
2 Use  HI to select the image to be erased, and press 
the A button to add a R mark to the image.
 
●Press the zoom lever to the W end to display an 
index view. Images can be quickly selected using 
the FGHI buttons. Press to the T end to return 
to the single frame display.
Sel. Image (1)
Erase/CancelOK
MENU
4/304/30
R mark
3 Repeat Step 2 to select the images to be erased, 
and then press the  button to erase the selected 
images.
4 Use  FG to select [Yes], and press the A button.
 
●The images with a  R mark are erased.
To erase all images [All Erase]To erase all images [All Erase]1 Use FG to select [All Erase], and press the 
A button.
2 Use  FG to select [Yes], and press the A button.
Saving print settings to the image data Saving print settings to the image data [Print Order][Print Order]
q (Playback Menu)   Print Order
  “Print reservations (DPOF)” (p. 57)  Print reservation can be set only for still images that 
are recorded to the card.
Protecting images [Protecting images [RR]]
q (Playback Menu)   R
  Protected images cannot be erased by [Erase] (p. 22, 
43), [Sel. Image] (p. 44), or [All Erase] (p. 44), but 
all images are erased by [Memory Format]/[Format] 
(p. 45).
1 Use  HI to select an image.
2 Press the  A button.
 
●Press the A button again to cancel the settings.
3  If necessary, repeat Steps 1 and 2 to protect other  images, and press the   button.
Setting images to upload to Setting images to upload to Internet using OLYMPUS Viewer 2 Internet using OLYMPUS Viewer 2 [Upload Order][Upload Order]
q (Playback Menu)  Upload Order
1 Use HI to select an image.
2 Press the  A button.
 
●Press the A button again to cancel the settings.
3  If necessary, repeat Steps 1 and 2 to make settings  for other images, and press the   button.
 Only JPEG fi les can be ordered.  For details on uploading images, refer to OLYMPUS 
Viewer 2 “Help”. 
						

							45EN
Menus for Other Camera SettingsMenus for Other Camera Settings
  The default settings of the function are highlighted in .
Using an Eye-Fi card [Eye-Fi]Using an Eye-Fi card [Eye-Fi]d (Settings Menu 1)  Eye-Fi
Submenu 2 Application
All Transfers all images.
Sel. Image Transfers only selected image.
Off  Disable Eye-Fi communication. 
  When using an Eye-Fi card, read the Eye-Fi card 
instruction manual carefully, and comply with the 
instructions.
  Use the Eye-Fi card in compliance with the laws and regulations of the country where the camera is used.
  In locations such as on an airplane, where the Eye-Fi communication is prohibited, remove the Eye-Fi card 
from the camera, or set [Eye-Fi] to [Off].
  This camera does not support the Eye-Fi card’s Endless mode.
Erasing data completely Erasing data completely [Memory Format]/[Format][Memory Format]/[Format]d  (Settings Menu 1)  Memory Format/Format
  Before formatting, check that no important data is left 
in the internal memory or card.
  Cards must be formatted with this camera before fi rst use or after being used with other cameras or 
computers.
  Be sure to remove the card before formatting the  internal memory.
Submenu 2 Application
Ye s Completely erases the image data 
in the internal memory or card 
(including protected images).
No
Cancels formatting.
Copying images in the internal memory Copying images in the internal memory to the card [Backup]to the card [Backup]d
 (Settings Menu 1)  Backup
Submenu 2 Application
Ye s Backs up image data in the internal 
memory to the card.
No 
Cancels the backup. 
						

							46EN
Selecting a method for connecting Selecting a method for connecting the camera to other devices the camera to other devices [USB Connection][USB Connection]d (Settings Menu 1)  USB Connection
Submenu 2 Application
Auto When the camera is connected to 
another device, the settings selection 
screen is displayed.
Storage
Select when connecting the camera 
to a computer via a storage device.
MTP Select when transferring images 
without using the supplied [ib] (PC 
software) on Windows Vista/
Windows 7.
Print Select when connecting to a 
PictBridge-compatible printer.
System requirementsSystem requirementsWindows  :  Windows XP Home Edition/
Professional (SP1 or later)/
Vista/Windows 7
Macintosh  :  Mac OS X v10.3 or later
  When using another system other than Windows XP  (SP2 or later)/Windows Vista/Windows 7, set to 
[Storage].
  Even if a computer has USB ports, proper operation is not guaranteed in the following cases:
 
●Computers with USB ports installed using an 
expansion card, etc.
 
●Computers without a factory-installed OS and 
home-built computers
Turning on the camera with the Turning on the camera with the qq  button [button [qq Power On] Power On]d
 (Settings Menu 1)  q Power On
Submenu 2 Application
No The camera is not turned on. To turn 
on the camera, press the n 
button.
Ye s
Press and hold the 
q button to turn 
the camera on in the playback mode.
Saving the mode when the camera is Saving the mode when the camera is turned off [Keepturned off [KeepzzSettings]Settings]d  (Settings Menu 1)  Keep z
Settings
Submenu 2 Application
Ye sThe shooting mode is saved when 
the camera is turned off and is 
reactivated the next time the camera 
is turned on.
No The shooting mode is set to P mode 
when the camera is turned on.  
						

							47EN
Selecting the camera sound and its volume [Sound Settings]Selecting the camera sound and its volume [Sound Settings]d (Settings Menu 1)  Sound Settings
Submenu 2 Submenu 3 Application
Sound Type
1/2/3 Selects the camera sounds (operation sounds, shutter sound, and 
warning sound).
Volume
0/1/2/3/4/5 Selects the operation volume of camera buttons.
q Volume0/1/2/3/4/5 Selects the image playback volume.
Resetting the fi
 le names of pictures [File Name]Resetting the fi le names of pictures [File Name]d
 (Settings Menu 2)  File Name
Month: 1 to C
(A=October, 
B=November, 
C=December)
Day: 01 to 31
Pmdd
Folder name Folder name File name
DCIM100OLYMP
999OLYMP Pmdd0001.jpg
Pmdd9999.jpg
Automatic 
numbering
Automatic 
numbering
Submenu 2 Application
ResetThis resets the sequential number 
for the folder name and 
fi le name 
whenever a new card is inserted.*1 
This is useful when grouping images 
on separate cards.
Auto Even when a new card is inserted, 
this continues the numbering for 
the folder name and 
fi le name from 
the previous card. This is useful for 
managing all image folder names 
and fi  les names with sequential 
numbers.
*1  The number for the folder name is reset to 100, and the 
one for the fi  le name is reset to 0001. 
						

							48EN
Adjusting the image processing Adjusting the image processing function [Pixel Mapping]function [Pixel Mapping]d (Settings Menu 2)  Pixel Mapping
  This function has already been adjusted at factory 
shipping, and no adjustment is needed right 
after purchase. Approximately once a year is 
recommended.
  For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. 
If the camera is turned off during pixel mapping, be 
sure to perform it again.
To adjust the image processing functionTo adjust the image processing functionPress the A button when [Start] (Submenu 2) is 
displayed.
 
●The check and adjustment of the image processing 
function starts.
Adjusting the brightness of the monitor Adjusting the brightness of the monitor [[ss]]d
 (Settings Menu 2)  s
To adjust the monitor brightnessTo adjust the monitor brightness1 Use  FG to adjust the brightness while viewing the 
screen, and then press the  A button.
MENUBacks
Playing back images on a TV [TV Out]Playing back images on a TV [TV Out]d
 (Settings Menu 2)  TV Out
Submenu 2 Submenu 3 Application
NTSC/PAL NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, 
and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
HDMI Out
480p/576p
720p
1080i Set the signal format to be given priority. If the TV setting does not match, 
it is changed automatically.
HDMI Control
Off Operate with the camera.
On Operate with the TV remote control.
  The factory default settings differ according to the region where the camera is sold. 
						

							49EN
To play back camera images on a TVTo play back camera images on a TV 
●Connection via AV cable
1  Use the camera to select the same video signal system as the one of conn\
ected TV ([NTSC]/[PAL]).
2  Connect the TV and camera.
TG-820TG-620
Connect to the TV video input 
jack (yellow) and audio input 
jack (white).
Multi-connector
AV cable (supplied)
Open the battery/card/
connector cover in the 
direction of the arrow.
 
●Connection via HDMI cable
1  On the camera, select the digital signal format that will be connected (\
[480p/576p]/[720p]/[1080i]).
2  Connect the TV and camera.
3  Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the\
 camera)”.
4  Turn on the camera, and use FGHI to select the image for playback.
  The TV video signal system varies depending on the countries and regions. Be\
fore viewing camera images on your  TV, select the video output according to your TV’s video signal type.
  When the camera is connected to the computer by the USB cable, do not co\
nnect the HDMI cable to the camera. 
						

							50EN
Connect to the HDMI 
connector on the TV.
HDMI micro connector 
(type D)HDMI cable 
(sold separately: CB-HD1)
Open the battery/card/
connector cover in the 
direction of the arrow.
TG-820TG-620
  For details on changing the input source of the TV, refer to the TV’s instruction manual.  When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.  Depending on the TV’s settings, the displayed images and information may become cropped.
To operate images with the TV remote controlTo operate images with the TV remote control1 
Set [HDMI Control] to [On], and turn off the camera.
2  Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 49)
3  First turn on the TV, and then turn on the camera.
 
●Operate by following the operation guide that is displayed on the TV.  With some TVs, operations cannot be performed with the TV remote control even though the operation guide is 
displayed on the screen.
  If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the camera.