Olympus Camera Sz 15 Instruction Manual

							41EN
  Saving battery power between   Saving battery power between 
shots shots dd [Power Save] [Power Save]
Submenu 2 Application
Off Cancels [Power Save].
OnWhen the camera is not being 
used for approx. 10 seconds, the 
monitor automatically turns off to 
save battery power.
To resume standby modeTo resume standby modePress any button.
  Changing the display language   Changing the display language 
dd [ [ll]]
Submenu 2 Application
LanguagesThe language for the menus and 
error messages displayed on the 
monitor is selected.
  Setting the date and time   Setting the date and time dd [ [XX]]
1 Press the Arrow pad to FG to select the year for 
[Y].
2 Press the Arrow pad to I to save the setting for 
[Y].
3 As in Steps 1 and 2, press the Arrow pad to 
FGHI to set [M] (month), [D] (day), [Time] 
(hours and minutes), and [Y/M/D] (date order), 
and then press the A button.
  ●For precise time setting, press the A button as the 
time signal strikes 00 seconds.
  Choosing home and alternate time   Choosing home and alternate time 
zones zones dd [World Time] [World Time]
  ●You will not be able to select a time zone using 
[World Time] if the camera clock has not fi rst been 
set using [X].
Submenu 2 Submenu 3 Application
Home/
AlternatexThe time in the home 
time zone (the time 
zone selected for x 
in submenu 2).
zThe time in the travel 
destination time 
zone (the time zone 
selected for z in 
submenu 2).
x
*1—Select the home time 
zone (x).
z
*1, 2—Select the travel 
destination time zone 
(z).
*1  In areas where daylight saving time is in effect, use 
FG to turn daylight saving time ([Summer]) on.
*2  When you select a time zone, the camera 
automatically calculates the time difference 
between the selected zone and the home 
time zone (x) to display the time in the travel 
destination time zone (z). 
						

							42EN
  d Settings Menu 3
 
Registering the settings for Beauty  
Registering the settings for Beauty 
Fix Fix dd [Beauty Settings] [Beauty Settings]
  ●Depending on the picture, the editing may not be 
effective.
1 Use FG to select a retouching setting, and 
press the Q button.
2 Press the shutter button to take a portrait picture.
Take a portrait picture.
  ●The image is not saved.
3 Select a retouching item, and press the Q button.
MENU
Off
Eye Color Back
4 Press the Q button on the review screen to save 
the image.
  ●Registration is complete. 
						

							43EN
  Connecting with a computer
When [USB Connection] is set to [Auto], connect the 
camera and the computer, select [Storage] or [MTP] 
at the screen for selecting the connection method, 
and then press the A button.
System requirementsSystem requirementsWindows  :  Windows XP Home Edition/
Professional (SP1 or later)/
Windows Vista/Windows 7/
Windows 8
Macintosh  :  Mac OS X v10.3 or later
  ●Even if a computer has USB ports, proper 
operation is not guaranteed in the following cases:
  ●Computers with USB ports installed using an 
expansion card, etc.
  ●Computers without a factory-installed OS and 
home-built computers
  ●When the computer does not support SDXC 
cards, a message may appear urging to format 
the internal memory or card. (Formatting will 
completely erase all images, so do not format.) Set [USB Connection] in the setup menu of the 
camera beforehand. (p. 37)
  Connecting the camera  Connecting the camera
USB cable 
(supplied) Connector cover Multi-connector 
						

							44EN
  Installing the PC software and 
registering user
WindowsWindows
1  Insert the supplied CD in a CD-
ROM drive.
Windows XP
  ●A “Setup” dialog will be displayed.
Windows Vista/Windows 7/Windows 8
  ●An Autorun dialog will be displayed. Click 
“OLYMPUS Setup” to display the “Setup” dialog.
  ●If the “Setup” dialog is not displayed, select “My 
Computer” (Windows XP) or “Computer” (Windows 
Vista/Windows 7) from the start menu. Double-click 
the CD-ROM (OLYMPUS Setup) icon to open the 
“OLYMPUS Setup” window and then double-click 
“Launcher.exe”.
  If a “User Account Control” dialog is displayed, 
click “Yes” or “Continue”.
2  Register your Olympus product.  ●Click the “Registration” button and follow the 
on-screen instructions.
  ●To register the camera must be connected to 
the computer. “Connecting the camera” (p. 43)
  ●If nothing is displayed on the camera screen 
even after connecting the camera to the 
computer, the battery may be exhausted. 
Charge the battery and then connect the 
camera again.
3  Install OLYMPUS Viewer 3.  ●Check the system requirements before 
beginning installation.
  ●Click the “OLYMPUS Viewer 3” button and 
follow the on-screen instructions to install the 
software.
OLYMPUS Viewer 3
Operating 
SystemWindows XP (Service Pack 2 or later) /
Windows Vista / Windows 7 /
Windows 8
ProcessorPentium 4 1.3 GHz or better (Core 2 
Duo 2.13 GHz or better required for 
movies)
RAM1 GB or more (2 GB or more 
recommended)
Free Hard 
Drive Space3 GB or more
Monitor 
Settings1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000 
colors recommended)
  ●See online help for information on using the 
software.  
						

							45EN
4  Install the camera manual.  ●Click the “Camera Instruction Manual” button 
and follow the on-screen instructions.
MacintoshMacintosh
1  Insert the supplied CD in a CD-
ROM drive.
  ●Double-click the CD (OLYMPUS Setup) icon 
on the desktop.
  ●Double-click the “Setup” icon to display the 
“Setup” dialog.
2  Install OLYMPUS Viewer 3.  ●Check the system requirements before 
beginning installation.
  ●Click the “OLYMPUS Viewer 3” button and 
follow the on-screen instructions to install the 
software.
  ●You can register via “Registration” in 
OLYMPUS Viewer 3 “Help”.
OLYMPUS Viewer 3
Operating 
SystemMac OS X v10.5–v10.8
ProcessorIntel Core Solo/Duo 1.5 GHz or better 
(Core 2 Duo 2 GHz or better required 
for movies)
RAM1 GB or more (2 GB or more 
recommended)
Free Hard 
Drive Space3 GB or more
Monitor 
Settings1024 × 768 pixels or more
Minimum 32,000 colors (16,770,000 
colors recommended)
  ●Other languages can be selected from the 
language combo box. For information on using the 
software, see online help.
3  Copy the camera manual.  ●Click the “Camera Instruction Manual” button to 
open the folder containing the camera manuals. 
Copy the manual for your language to the 
computer
.   
						

							46EN
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible 
printer, you can print images directly without using a 
computer.
To  fi nd out if your printer supports PictBridge, refer to 
the printer’s instruction manual.
  ●The printing modes, paper sizes, and other 
parameters that can be set with the camera vary 
depending on the printer that is used. For details, 
refer to the printer’s instruction manual.
  ●For details on the available paper types, loading 
paper, and installing ink cassettes, refer to the 
printer’s instruction manual.
  ●In the setup menu, set [USB Connection] to [Print]. 
[USB Connection] (p. 37)
  Printing images at the printer’s 
standard settings [Easy Print]
1  Display the image to be printed on 
the monitor.
  ●“Viewing images” (p. 16)
2  Turn on the printer, and then 
connect the printer and camera.
USB cable (supplied)Connector cover
Multi-connector
I (right)
3 Press I to start printing.
4  To print another image, use HI 
to select an image, and press the 
A button.
To exit printingTo exit printingAfter a selected image is displayed on the screen, 
disconnect the USB cable from the camera and 
printer. 
						

							47EN
Changing the printer’s settings 
for printing [Custom Print]
1  Display the image to be printed on 
the monitor.
  ●“Viewing images” (p. 16)
2  Turn on the printer, and then 
connect the printer and camera.
3 Press the A button.
4 Use FG to select the print mode, 
and press the A button.
Submenu 2 Application
PrintThis prints the image selected 
in Step 8.
All PrintThis prints all images stored in the 
internal memory or card.
Multi PrintThis prints one image in a multiple 
layout format.
All IndexThis prints an index of all images 
stored in the internal memory 
or card.
Print Order
*1This prints images based on the 
print reservation data on the card.
*1  [Print Order] is available only when print 
reservations have been made. “Print Reservations” 
(p. 49)
5 Use FG to select [Size] 
(Submenu 3), and press I.
  ●If the [Printpaper] screen is not displayed, the 
[Size], [Borderless], and [Pics/Sheet] are set to the 
printer’s standard.
MENUPrintpaper
Size BorderlessBack
StandardStandard
6 Use FG to select the 
[Borderless] or [Pics/Sheet] 
settings, and press the A button.
Submenu 4 Application
Off/
On
*1
The image is printed with a border 
around it ([Off]).
The image is printed to fi ll the 
entire paper ([On]).
(The number 
of images per 
sheet varies 
depending on 
the printer.)The number of images per sheet 
([Pics/Sheet]) is selectable only 
when [Multi Print] is selected in 
Step 4.
*1 The available settings for [Borderless] vary 
depending on the printer.
  If [Standard] is selected in Steps 5 and 6, the 
image is printed at the printer’s standard settings. 
						

							48EN
7 Use HI to select an image.
8 Press F to make a print 
reservation for the current image. 
Press G to make the detailed 
printer settings for the current 
image.
To make the detailed printer settingsTo make the detailed printer settings1 Use FGHI to select the setting, and press the 
A button.
Submenu 5 Submenu 6 Application

						

							49EN
11 Use FG to select [Print], and 
press the A button.
  ●Printing starts.
  ●When [Option Set] is selected in [All Print] 
mode, [Print Info] screen is displayed.
  ●When printing is fi nished, the [Print Mode 
Select] screen is displayed.
Multi Print
Print OrderAll IndexAll Print
Print Print
MENUPrint Mode Select Back
To cancel printingTo cancel printing1 Press the  button while [Do Not Remove 
USB Cable] is displayed.
2 Select [Cancel] using FG and then press the A 
button.
12 Press  the  button.
13 When the message [Remove USB 
Cable] is displayed, disconnect 
the USB cable from the camera 
and printer.
  Print Reser vations
In print reservations, the number of prints and date 
imprint option are saved in the image on the card. 
This enables easy printing at a printer or print shop 
supporting DPOF by using only the print reservations 
on the card without a computer or a camera.
  ●Print reservations can be set only for the images 
stored on the card.
  ●DPOF reservations set by another DPOF device 
cannot be changed by this camera. Make changes 
using the original device. Making new DPOF 
reservations with this camera will erase the 
reservations made by the other device.
  ●DPOF print reservations can be made for up to 999 
images per card.
  Single-frame print reser vations 
[

						

							50EN
3 Use FG to select [