Olympus Camera Sp 820uz Ihs Instruction Manual

							31EN
 A Movie Menu
 Selecting the image size for movies  Selecting the image size for movies AA [Image Size] [Image Size]
Submenu 2Application1080p 
720p
VGA (640×480)
HS720 60fps
*1HSVGA 120fps*1HSQVGA 240fps*1
Select the image quality based on 
the image size and frame rate.
*1  HS: Film quickly moving subjects for slow-motion 
playback.
  
  In HS movie mode, shooting mode is automatically  set to P.
  “Number of storable pictures (still images)/Recording length (movies) in the internal memory and cards” 
(p. 62, 63)
 Reducing the blur caused by the  Reducing the blur caused by the camera shake when shootingcamera shake when shootingA A [IS Movie Mode][IS Movie Mode]
Submenu 2 Application
Off The image stabilizer is deactivated. 
This is recommended for shooting 
when the camera is 
fi xed in place on 
a tripod or other stable surface.
On The image stabilizer is activated.
  Images may not be stabilized if camera shake is too 
severe.
Recording sound when shooting Recording sound when shooting movies movies AA [ [RR]]
Submenu 2 Application
Off No sound is recorded.
OnSound is recorded.
  
  Sound is not recorded when an HS movie mode is  selected.
Reduce wind noise in the recorded Reduce wind noise in the recorded sound when recording moviesound when recording movieAA [Wind Noise Reduction] [Wind Noise Reduction]
Submenu 2 ApplicationOff
Disable Wind Noise Reduction.
On Uses Wind Noise Reduction. 
						

							32EN
 
q Playback Menu
 Playing back pictures automatically  Playing back pictures automatically qq [Slideshow] [Slideshow]
Submenu 2 Submenu 3 Application
BGMOff/Cosmic/
Breeze/Mellow/
Dreamy/Urban Selects the background 
music options.
Type
Normal/
Fader/
Zoom Selects the type of 
transition effect used 
between slides.
Start ―Starts the slideshow.
  During a slideshow, press  I to advance one frame, 
H to go back one frame.
 Press the   button or the i button to stop the 
slideshow.
Changing the image size Changing the image size qq [ [QQ]]This saves a high-resolution image as a separate image 
with a smaller size for use in e-mail attachments and other 
applications.
Submenu 1 Submenu 2 Submenu 3
Edit Q
 640×480
 320×240
1  Use HI to select an image.
2  Use FG to select an image size and press the 
A button.
 
●The resized image is saved as a separate image.
Cropping image Cropping image qq [ [PP]]
Submenu 1 Submenu 2
Edit P
1  Use HI to select an image, and press the  A button.
2  Use the zoom lever to select the size of the cropping 
frame, and use FGHI to move the frame.
Cropping frame
MENUBack
3 Press the A button after you have selected the area 
to trim.
 
●The edited image is saved as a separate image. 
						

							33EN
 Adding sound to still images  Adding sound to still images qq [ [RR]]
Submenu 1Submenu 2
Edit R
1  Use HI to select an image.
2  Aim the microphone toward the sound source.
Microphone
3 Press the A button. 
●Recording starts. 
●The camera adds (records) sound for approx. 
4 seconds while playing back the image.
Retouching faces on still images Retouching faces on still images qq [Beauty Fix] [Beauty Fix]
Submenu 1 Submenu 2
Edit Beauty Fix
  Depending on the picture, the editing may not be 
effective.
1  Select a picture using  HI and press the Q button.
2  Select an option using  FG and press the Q button.
3  To save the image, select [OK] on the review screen 
and press the Q button. To retouch the image 
additionally, select [Beauty Fix].
 
●The retouched image is saved as a separate 
image.
OKBeauty FixMENUBack
  After retouching, [Image Size] is limited to [n] or 
smaller.
Beauty FixBeauty Fix
1  Select a retouching item, and press the  Q button.
MENU
Off
Eye ColorBack
2 Press the Q button on the review screen. 
						

							34EN
Brightening areas that are dark due to Brightening areas that are dark due to backlight or other reasons backlight or other reasons qq [Shadow Adj] [Shadow Adj]
Submenu 1Submenu 2
Edit Shadow Adj
1  Use HI to select an image, and press the  A button.
 
●The edited image is saved as a separate image.  Depending on the picture, the editing may not be 
effective.
  The retouching process may lower the image resolution.
Retouching red eyes in fl  ash shooting Retouching red eyes in fl ash shooting qq [Redeye Fix] [Redeye Fix]
Submenu 1 Submenu 2
Edit Redeye Fix
1  Use HI to select an image, and press the  A button.
 
●The edited image is saved as a separate image.  Depending on the picture, the editing may not be 
effective.
  The retouching process may lower the image resolution.
 Rotating images  Rotating images qq [ [yy]]
Submenu 1 Submenu 2
Edit y
1  Use HI to select an image.
2  Press the A button to rotate the image.
3  If necessary, repeat Steps 1 and 2 to make settings 
for other images, and press the   button.
  The new picture orientations will be saved even after 
the power is turned off.
 Erasing images  Erasing images qq [Erase] [Erase]
Submenu 2 Application
 All Erase All images in the internal memory or 
card will be erased.
Sel. ImageImages are individually selected and 
erased.
 Erase Deletes the image displayed.
 Erase Group All images in the group are erased 
(p. 16).
  When erasing pictures in the internal memory, do not 
insert the card into the camera. 
  Protected images cannot be erased.
   
						

							35EN
 To individually select and erase images  To individually select and erase images [Sel. Image][Sel. Image]
1 Use FG to select [Sel. Image], and press the 
A button.
2  Use FGHI to select the image to be erased, and 
press the A button to add a R mark to the image.
 
●Turn to the T end to return to the single frame 
display.
Sel. Image (1)
Erase/CancelOK
MENU
4/30
R mark
3 Repeat Step 2 to select the images to be erased, 
and then press the  button to erase the selected 
images.
4  Use FG to select [Yes], and press the A button.
 
●The images with a  R mark are erased.
 To erase all images [All Erase] To erase all images [All Erase]
1 Use FG to select [All Erase], and press the 
A button.
2  Use FG to select [Yes], and press the A button.
Saving print settings to the image data Saving print settings to the image data qq [Print Order] [Print Order]
  “Print Reservations” (p. 49)  Print reservation can be set only for still images that 
are recorded to the card.
Protecting images Protecting images qq [ [RR]]
  Protected images cannot be erased by [Erase] (p. 19, 34), [Sel. Image] (p. 34), [Erase Group] (p. 34) or [All 
Erase] (p. 34), but all images are erased by [Memory 
Format]/[Format] (p. 36).
1  Use HI to select an image.
 
●Turn the zoom lever to the W end to display an 
index view. Images can be quickly selected using 
the FGHI buttons.
2  Press the A button.
 
●Press the A button again to cancel the settings.
3  If necessary, repeat Steps 1 and 2 to protect other 
images, and press the   button. 
						

							36EN
Setting images to upload to Internet Setting images to upload to Internet using OLYMPUS Viewer 2 using OLYMPUS Viewer 2 qq [Upload Order] [Upload Order]
1 Use HI to select an image. 
●Turn the zoom lever to the W end to display an 
index view. Images can be quickly selected using 
the FGHI buttons.
2  Press the A button.
 
●Press the A button again to cancel the settings.
3  If necessary, repeat Steps 1 and 2 to make settings 
for other images, and press the   button.
 Only JPEG fi les can be ordered.  For details on OLYMPUS Viewer 2, refer to “Installing 
the PC software and registering user” (p. 44).
  For details on uploading images, refer to OLYMPUS Viewer 2 “Help”.
 d Settings Menu 1
 Erasing data completely  Erasing data completely dd [Memory Format]/  [Memory Format]/ dd [Format] [Format]
  Before formatting, check that no important data is left in the internal memory or card.
  Cards must be formatted with this camera before fi rst use or after being used with other cameras or 
computers.
  Be sure to remove the card before formatting the  internal memory.
Submenu 2 Application
Ye s Completely erases the image data 
in the internal memory or card 
(including protected images).
No
Cancels formatting.
 Copying images in the internal memory  Copying images in the internal memory to the card to the card dd [Backup] [Backup]
Submenu 2 Application
Ye s Backs up image data in the internal 
memory to the card.
No 
Cancels the backup. 
						

							37EN
Using an Eye-Fi card Using an Eye-Fi card dd [Eye-Fi] [Eye-Fi]
Submenu 2Application
All Transfers all images.
Sel. Image Transfers only selected image.
Off  Disable Eye-Fi communication. 
  When using an Eye-Fi card, read the Eye-Fi card 
instruction manual carefully, and comply with the 
instructions.
  Use the Eye-Fi card in compliance with the laws and regulations of the country where the camera is used.
  In locations such as on an airplane, where the Eye-Fi communication is prohibited, remove the Eye-Fi card 
from the camera, or set [Eye-Fi] to [Off].
  This camera does not support the Eye-Fi card’s Endless mode.
 Selecting a method for connecting the  Selecting a method for connecting the camera to other devices camera to other devices dd [USB Connection] [USB Connection]
Submenu 2 Application
Auto Set to select the connection method 
each time the camera is connected 
to another device.
StorageConnect camera as a card reader.
MTP For Windows Vista or Windows 7, 
connect camera as a portable device.
Print Select when connecting to a 
PictBridge-compatible printer.
  When using the attached software, select [Storage].  Refer to “Connecting with a computer” (p. 43) for the 
connection method with a computer.
Turning on the camera with the Turning on the camera with the qq  button button dd [ [qq Power On] Power On]
Submenu 2 Application
No The camera is not turned on. To turn 
on the camera, press the n 
button.
Ye s
Press and hold the 
q button to turn 
the camera on in the playback mode.
Selecting the camera sound and its Selecting the camera sound and its volume volume dd [Sound Settings] [Sound Settings]
Submenu 2 Submenu 3 Application
Sound Type
1/2/3 Selects the camera sounds 
(operation sounds and 
shutter sound).
Volume
0/1/2/3/4/5 Select button response tone 
level and power on sound 
level.
q Volume
0/1/2/3/4/5 Selects the image playback 
volume. 
						

							38EN
 Resetting the fi le names of pictures  Resetting the fi le names of pictures dd [File Name] [File Name]
Month: 1 to C
(A=October, 
B=November, 
C=December)
Day: 01 to 31
Pmdd
Folder name Folder name File name
DCIM100OLYMP
999OLYMP Pmdd0001.jpg
Pmdd9999.jpg
Automatic 
numbering
Automatic 
numbering
Submenu 2 Application
ResetThis resets the sequential number for the 
folder name and 
fi le name whenever a 
new card is inserted.*1 This is useful when 
grouping images on separate cards.
Auto Even when a new card is inserted, this 
continues the numbering for the folder 
name and 
fi le name from the previous 
card. This is useful for managing all 
image folder names and  fi les names with 
sequential numbers.
*1  The number for the folder name is reset to 100, and the 
one for the fi  le name is reset to 0001.
 d Camera Menu 2
Adjusting the image processing Adjusting the image processing function function dd [Pixel Mapping] [Pixel Mapping]
  This function has already been adjusted at factory 
shipping, and no adjustment is needed right 
after purchase. Approximately once a year is 
recommended.
  For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. 
If the camera is turned off during pixel mapping, be 
sure to perform it again.
To adjust the image processing functionTo adjust the image processing functionPress the A button when [Start] (Submenu 2) is 
displayed.
 
●The check and adjustment of the image processing 
function starts.
Adjusting the brightness of the monitor Adjusting the brightness of the monitor dd [ [ss]]
To adjust the monitor brightnessTo adjust the monitor brightness
1  Use FG to adjust the brightness while viewing the 
screen, and then press the  A button.
MENUBack
s 
						

							39EN
  Playing back images on a TV   Playing back images on a TV dd [TV Out] [TV Out]
  The TV video signal system varies depending on the countries and regions. Be\
fore viewing camera images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Submenu 3 Application
NTSC/PAL NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, 
and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
HDMI Out
480p/576p
720p
1080i Set the signal format to be given priority. If the TV setting does not match, 
it is changed automatically.
HDMI Control
Off Operate with the camera.
On Operate with the TV remote control.
  The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TVTo play back camera images on a TV
 
● Connection via AV cable
1  Use the camera to select the same video signal system as the one of conn\
ected TV ([NTSC]/[PAL]).
2  Connect the TV and camera.
 
●  Connection via HDMI cable
1  On the camera, select the digital signal format that will be connected (\
[480p/576p]/[720p]/[1080i]).
2  Connect the TV and camera.
3  Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the\
 camera)”.
4  Turn on the camera, and use  FGHI to select the image for playback.
  When the camera is connected to the computer by the USB cable, do not co\
nnect the HDMI cable to the camera. 
						

							40EN
Connect to the TV video input 
jack (yellow) and audio input 
jack (white).
AV cable
(sold separately: CB-AVC3)
Connect to the HDMI 
connector on the TV.
Multi-connector
HDMI micro connector 
(type D)
HDMI cable 
(sold separately: CB-HD1)
  For details on changing the input source of the TV, refer to the TV’s instruction manual.  When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.  Depending on the TV’s settings, the displayed images and information may become cropped.
To operate images with the TV remote controlTo operate images with the TV remote control
1  Set [HDMI Control] to [On], and turn off the camera.
2  Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 39)
3  First turn on the TV, and then turn on the camera.
 
●Operate by following the operation guide that is displayed on the TV.  With some TVs, operations cannot be performed with the TV remote control even though the operation guide is 
displayed on the screen.
  If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the camera.