Olympus Camera Sh 50 Ihs Instruction Manual
Have a look at the manual Olympus Camera Sh 50 Ihs Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 18 Olympus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DIGITAL CAMERA Instruction Manual SH-50 ● Thank you for purchasing an Olympus digital camera. Before you start to \ use your new camera, please read these instructions carefully to enjoy optimum performance and a lon\ ger service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera be\ fore taking important photographs. ● In the interest of continually improving products, Olympus reserves the \ right to update or modify information contained in this manual.
2EN Checking the contents of the box or Digital camera Strap Lithium Ion Battery (LI-90B) USB-AC adapter (F-2AC) USB cable (CB-USB8) OLYMPUS Setup CD-ROM Stylus pen Names of PartsNames of Parts 3 21 4 6 5 8 9 10 11 7 1 Strap eyelet2 Connector cover3 Multi-connector4 HDMI micro connector5 Self-timer lamp/ AF illuminator 6 Flash7 Lens8 Speaker9 Tripod socket10 Battery/card cover11 Battery/card cover lock Other accessories not shown: Warranty card Contents may vary depending on purchase location.
3EN 2 9 10 11 12 13 4 8 1 5 6 7 3 1 Stereo microphone2 Flash switch3 Monitor4 Zoom lever5 Shutter button6 Mode dial7 n button8 Indicator lamp9 F button (shooting movies)10 A button (OK)11 Arrow pad INFO (changing information display) # (fl ash) Y (self-timer) (erase)12 q button (switching between shooting and playback) 13 button Attaching the camera strapAttaching the camera strap Pull the strap tight so that it does not come loose. Arrow pad H (left) G (down)F (up) I (right) FGHI instruct to press the up/down/left/right arrow pad.
4EN Inserting and removing the batter y and card (commercially available) 1 Follow Steps 1 and 2 to open the battery/card cover. 2 1 Battery/card cover Battery/card cover lock Turn off the camera before opening the battery/card cover. 2 Insert the battery while sliding the battery lock knob in the direction of the arrow. Battery lock knob Insert the battery as illustrated with the C mark toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. 3 Insert the card straight until it clicks into place. Write-protect switch Always use SD/SDHC/SDXC/Eye-Fi/FlashAir (with Wireless LAN function) card with this camera. Do not insert other types of memory cards. “Using the card” (p. 73) ● Do not touch the metallic parts of the card directly.
5EN To remove the cardTo remove the card 12 Press the card in until it clicks and comes out slightly, then remove the card. 4 Follow Steps 1 and 2 to close the battery/card cover. 1 2 When using the camera, be sure to close and lock the battery/card cover. Charging the batter y Connect the USB cable and USB-AC adapter to the camera and charge the battery. For charging the battery abroad, see “Using your charger and USB-AC adapter abroad” (p. 72). ● The battery is not fully charged at shipment. Before use, be sure to charge the battery until the indicator lamp turns off (up to 4 hours). Connecting the camera Connecting the camera AC outlet USB cable (supplied) Connector cover Indicator lamp On: Charging Off: Charged Multi-connector
6EN When to charge the batteriesWhen to charge the batteriesCharge the battery when the error message shown below appears. Battery Empty Error message Flashes in red Never use any cable other than supplied or Olympus-designated USB cable. This may cause smoking or burning. The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs depending on the region where you purchased the camera. If you received a plug-in type USB- AC adapter, plug it directly into AC outlet. The included USB-AC adapter has been designed to be used for charging and playback. Do not take pictures while the USB-AC adapter is connected to the camera. Be sure to unplug the power plug of the USB-AC adapter from the wall outlet when the charging is complete or the playback ends. For details on the battery, see “Battery Handling Precautions” (p. 80). For details on the USB-AC adapter, see “USB-AC adapter” (p. 81). ● If the indicator lamp does not light, check the USB cable and USB-AC adapter connections. ● The battery can be charged while the camera is connected to the computer via USB. The charging time varies depending on the performance of the computer. (There may be cases in which it takes approx. 10 hours.)
7EN Turning on the camera and making the initial settings When you turn on the camera for the fi rst time, a screen appears enabling to set the language for the menus and messages displayed in the monitor, and the date and time. To change the selected date and time, see “Setting the date and time d [X]” (p. 50). 1 Press the n button to turn on the camera, press FGHI of the arrow pad to select your language and press the A button. 2 Press FG of the arrow pad to select the year for [Y]. XMENUBack Y/M/D YMDTime -- -- ----:..2013 Date and time setting screen 3 Press I of the arrow pad to save the setting for [Y]. XMENUBack Y/M/D Y M D Time ---- ----:..2013 4 As in Steps 2 and 3, press FGHI of the arrow pad to set [M] (month), [D] (day), [Time] (hours and minutes), and [Y/M/D] (date order), and then press the A button. For precise time setting, press the A button as the time signal strikes 00 seconds. 5 Press HI of the arrow pad to select time zone and then press the A button. ● Use FG to turn daylight saving time ([Summer]) on or off. ’13.02.26 12:30 Summer Seoul Tokyo
8EN Learning how to use the camera ● Press the n button to turn on the camera and enter the standby mode. (Press the n button again to turn off the camera.) ● Select the shooting mode, and press the shutter button to shoot a still image. ● To shoot a movie, press the F button. ● Set the shooting functions using the function menu or the setup menu. ● To view images, press the q button to switch to playback mode. ● To return to standby mode, press the q button again, or press the shutter button halfway down and then release it. ● Press and hold the q button while the camera is turned off to start up the camera in the playback mode. ● In this case, pressing the q button again sets the camera to the standby mode. Using the Touch Panel Use the touch panel by touching the screen with your fi nger. ● The touch panel can be used for operations marked with in this manual. ● Using a screen protector or gloves may cause poor operability. ● Use a stylus pen (supplied) when it is dif fi cult to operate with your fi nger. Using for the live guide (p. 15)Using for the live guide (p. 15)In M mode, the live guide can be set. 1 Touch M. ● Touch an item to set the level. 2 Drag the level bar slider vertically to set the level, and touch N. ● Touch O to end the live guide. Clear & Vivid Flat & Muted
9EN Using for the shooting mode Using for the shooting mode By touching the screen, the subject to be focused on can be set or the picture can be taken. Every time is touched, the operation is changed. : The subject that is touched is focused on and the picture is taken automatically. : The subject that is touched is AF locked. Press the shutter button to take the picture. Touch to release the AF lock. Focus lock ends when the shutter is released. 16M 44NORM0:340:34 LIVEGUIDELIVE GUIDE 1080 Using for the playback mode Using for the playback mode The displayed image can be changed or enlarged. Advancing and rewinding one frame at a time: Drag the screen to left to advance one frame, and drag the screen to right to rewind one frame. ’13/02/26’13/02/26 12:3012:30 4/30 4/30 Zoom: Touch to enlarge the image. ● When the enlarged image is dragged, the displayed image is also moved. Index: Touch to play back the image in index view. ● Touch the image to play back the image in single-image view. 12:3012:30 ’13/02/26’13/02/26 Playback (grouped image, panorama image, movie, Photo with Movie Clip, sound recorded with an image): Touch . ● Touch K to expand the grouped images.
10EN 4 Press the shutter button halfway down to focus. Press halfway PP F3.0F3.0 1/4001/400 AF target mark Shutter speed Aperture value ● The camera was unable to focus if the AF target mark fl ashes red. Try focusing again. 5 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. Press halfwayPress fully Shooting still images 1 Press the n button to turn on the camera. 2 Select the shooting mode. (p. 14) 3 Hold the camera and compose the shot. When holding the camera, take care not to cover the fl ash, microphone or other important parts with your fi ngers, etc. Take care so that the fl ash window is not exposed to fi ngerprints or dirt.