Olympus Camera Pen E P5 Instruction Manual

							91EN
Menu functions (Custom menus)
4
 
G Settings (Index/calendar display)
You can add an index display with a different number of frames and calendar display 
using [G Settings]. The additional screens are displayed by turning the main dial 
during playback. 
QQp
q
Index display
p
qpq
4 frames
2013.06.0112:3020
9–100 frames2013.06.0112:3020
2013.06.0112:3020
Single-frame 
playback
2013.06.0112:3020100-0020LN
Calendar display
2013.6Sun Mon Tue Wed Thu Fri Sat26 27 28 29 30 31  1 2 3 4 5 6 7 8 9 10  11 12 13 14 15  16 17 18 19 20 21 22 
23 24 25 26 27 28 29 
30 1 2 3 4
 
26 27 28 29 30 31  1
 2 3 4 5 6 7 8
 9 10  11 12  13 14 15
  16 17 18 19  20 21 22
 
23 24 25 26  27 28 29
 
30  1 2 3 4
 Shutter speeds when the  fl ash  fi res automatically [# X-Sync.] 
[# Slow Limit]
You can set shutter speed conditions for when the  fl ash  fi res.
Shooting 
mode Flash timing 
(synchronous) Upper limit Lower limit
P The slower of 1/(lens focal 
length×2) and the 
[# X-Sync.] settings [# X-Sync.] setting*[# Slow Limit] setting
A
S The set shutter speed No lower limit
M
*  1/320 seconds when using the internal  fl ash and 1/250 seconds when using a separately 
sold external  fl ash. 
						

							92EN
Menu functions (Accessory port menus)
4
 Using the accessory port menus
You can make settings relating to devices connected via the accessory por\
t.
  Before Using the Accessory Port Menus
The Accessory Port menu is only available when the appropriate option is sel\
ected for the 
[c/# Menu Display] item in the setup menu.
1 Press the MENU button to display the menus, and display the d (Setup 
Menu) tab.
2 Select [c/# Menu Display] and set [# Menu Display] to [On].
• The  # (Accessory Port Menu) tab will be displayed in the menu.
Accessory Port Menu
A OLYMPUS PENPAL Share (P. 94)
#
21
c
OLYMPUS PENPAL Share
OLYMPUS PENPAL Album
Electronic Viewfinder
BackAccessory Port Menu
SetBOLYMPUS PENPAL Album (P. 95)
C Electronic View
fi nder (P. 95) 
						

							93EN
Menu functions (Accessory port menus)
4
  Using OLYMPUS PENPAL
The optional OLYMPUS PENPAL can be used to upload pictures to, and receive 
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS 
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
  Sending images
Resize and upload JPEG images to another device. Before sending images, \
make 
sure that the receiving device is set to the mode for receiving data.
1 Display the picture you wish to send full frame and 
press Q.
2 Select [Send A Picture] and press Q.
•  Select [Search] and press Q in the next dialog. The camera searches for and displays Bluetooth devices in 
range or in [Address Book].
3 Select the destination and press  Q.
•  The image will be uploaded to the receiving device.
•  If prompted to provide a PIN code, enter 0000 and 
press Q.
JPEG
<
Erase
Send A Picture
Back
Set
Send Picture Sending
Cancel
  Receiving images/adding a host
Connect to the transmitting device and download JPEG images.
1 Select [OLYMPUS PENPAL Share] in # Accessory 
Port Menu (P. 92).
2 Select [Please Wait] and press Q.
•  Perform operations for sending images on the sending  device.
•  Transmission will start and a [Receive Picture Request]  dialog will be displayed.#
21
c
OLYMPUS PENPAL Share
OLYMPUS PENPAL Album
Electronic Viewfinder
BackAccessory Port Menu
Set
3 Select [Accept] and press Q.
•  The image will be downloaded to the camera.
•  If prompted to provide a PIN code, enter 0000 and press Q.
Receive Picture
Receiving
Cancel 
						

							94EN
Menu functions (Accessory port menus)
4
   Editing the address book
The OLYMPUS PENPAL can store host information. You can assign names to hosts or 
delete host information.
1 Select [OLYMPUS PENPAL Share] in # Accessory 
Port Menu (P. 92).
2 Select [Address Book] and press Q.
3 Select [Address List] and press Q.
•  The names of existing hosts are listed.
1
Please Wait
Address Book
My OLYMPUS PENPAL
Picture Send Size
Back
A. OLYMPUS PENPAL Share
Set
4 Select the host you wish to edit and press  Q.
Deleting hosts
Select [Yes] and press Q.
Editing host information
Press Q to display host information. To change the host name, press  Q again and edit 
the current name in the rename dialog.
  Creating albums
Your favorite JPEG pictures can be resized and copied to an OLYMPUS PENPAL.
1 Display the picture you wish to copy full frame and 
press Q.
2 Select [z] and press Q.
•  To copy images from an OLYMPUS PENPAL to the  memory card, select [y] and press Q.
JPEG
Erase
Back
Send A Picture
Set<
# Cautions
•  The OLYMPUS PENPAL can be used only in the region in which it was purchased. Depending on the areas, the usage may infringe the wave regulations and \
may be subject 
to its penalty.
   A OLYMPUS PENPAL Share
Option Description
g
Please Wait Receive images and add hosts to the address book. 93
Address Book  [Address List]: View the hosts that have been saved to the 
address book.
[New Pairing]: Add a host to the address book.
[Search Timer]: Choose how long the camera searches for 
a host. 94
My OLYMPUS 
PENPAL  Display information for your OLYMPUS PENPAL, including 
the name, address, and supported services. Press 
Q to edit 
the device name. 94
Picture Send Size Choose the size at which images are transmitted.
[Size 1: Small]: Images are sent at a size equivalent to 
640 × 480.
[Size 2: Large]: Images are sent at a size equivalent to 
1920 × 1440.
[Size 3: Medium]: Images are sent at a size equivalent to 
1280 × 960. 93
MENU 
 
#
  A 
						

							95EN
Menu functions (Accessory port menus)
4
  
B OLYMPUS PENPAL Album
OptionDescription
g
Copy All  All images and sound fi les are copied between the SD 
card and OLYMPUS PENPAL. Copied images are resized 
according to the option selected for picture copy size. 93
Reset Protect  Remove protection from all pictures in the OLYMPUS 
PENPAL album. 94
Album Mem. Usage  Show the number of pictures currently in the album and the 
number of additional pictures that can be stored at [Size 2: 
Medium]. 94
Album Mem. Setup [All Erase]: Delete all pictures in the album.
[Format Album]: Format the album. 94
Picture Copy Size  Choose the size at which images are copied.
[Size 1: Large]: Copied images are not resized.
[Size 2: Medium]: Images are copied at a size equivalent to 
1920 × 1440. 94
  C Electronic View
fi nder
Option Description
g
 
EVF Adjust  Adjust the brightness and the 
color temperature of optional 
external viewfi nders. The 
selected color temperature 
is also used in the monitor 
during playback. Use  HI to 
select color temperature ( j) 
or brightness ( k) and use 
FG to choose from values 
between [+7] and [–7].
-5j+2kEVF Adjust
Back
Set
—
  EVF Auto Switch Sets whether to automatically switch the display away 
from the monitor when using the VF-4 external electronic 
viewfi nder.
When set to [Off], pressing the  u button on the external 
viewfi  nder switches the display between the view fi nder and 
the monitor. When set to [On], the display automatically 
switches to VF-4 when you look through it. 11 9
MENU 
 
#
  B
MENU  #
  C 
						

							96EN
Printing pictures
5
5
  Print reservation (DPOF)
You can save digital “print orders” to the memory card listing the \
pictures to be printed 
and the number of copies of each print. You can then have the pictures printed at a 
print shop that supports DPOF or print the pictures yourself by connecti\
ng the camera 
directly to a DPOF printer. A memory card is required when creating a print order.
 Creating a print order
1 Press Q during playback and select [
						

							97EN
Printing pictures
5
Removing all or selected pictures from the print order
You can reset all print reservation data or just the data for selected pi\
ctures.
1 Press Q during playback and select [
						

							98EN
Printing pictures
5
Easy printing
Use the camera to display the picture you wish to print before connectin\
g the printer 
via the USB cable.
1 Use HI to display the pictures you want to print 
on the camera.
2 Press I.
•  The picture selection screen appears when printing is completed. To print another picture, use  HI to select 
the image and press  Q.
•  To exit, unplug the USB cable from the camera while the  picture selection screen is displayed.
PC/Custom PrintEasy Print Start
 Custom printing
1 Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print modes are as shown below.
Print Prints selected pictures.
All Print Prints all the pictures stored in the card and makes one print for 
each picture.
Multi Print Prints multiple copies of one image in separate frames on a single 
sheet.
All Index Prints an index of all the pictures stored in the card.
Print Order Prints according to the print reservation you made. If there is no 
picture with print reservation, this is not available.
Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is 
available, you cannot change the setting.
Size Sets the paper size that the printer supports.
Borderless Selects whether the picture is printed on the entire page or inside a 
blank frame.
Pics/Sheet Selects the number of pictures per sheet. Displayed when you have 
selected [Multi Print]. 
						

							99EN
Printing pictures
5
Selecting pictures you want to print
Select pictures you want to print. The selected pictures can 
be printed later (single-frame reservation) or the picture 
you are displaying can be printed right away.
PrintMore
Select
Single Print
2013.06.0112:3015123-3456
Print (f)Prints the currently displayed picture. If there is a picture that [Sing\
le 
Print] reservation has already been applied to, only that reserved 
picture will be printed.
Single Print 
(t) Applies print reservation to the currently displayed picture. If you 
want to apply reservation to other pictures after applying [Single 
Print], use HI to select them.
More (u) Sets the number of prints and other items for the currently displayed 
picture, and whether or not to print it. For operation, refer to “Set\
ting 
printing data” in the next section.
Setting printing data
Select whether to print printing data such as the date and time or  fi le name on the picture 
when printing. When the print mode is set to [All Print] and [Option Set\
] is selected, the 
following options appears.

						

							100EN
Connecting the camera to a computer
6
6 Connecting the camera to a computer
Installing the PC software
 Windows
1 Insert the supplied CD in a CD-ROM drive.
Windows XP•  A “Setup” dialog will be displayed.
Windows Vista/Windows 7/Windows 8 •  An Autorun dialog will be displayed. Click “OLYMPUS  Setup” to display the “Setup” dialog.
# Cautions
•  If the “Setup” dialog is not displayed, select “My Computer”\
 (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the 
CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then 
double-click “LAUNCHER.EXE”.
•  If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
2 Follow the on-screen instructions on your computer.
# Cautions
•  If nothing is displayed on the camera screen even after connecting the c\
amera to the  computer, the battery may be exhausted. Use a full-charged battery.
 Multi-connector Smaller 
terminalUSB cable
Look for this mark.
USB port
# Cautions
•  When the camera is connected to another device via USB, a message will b\
e  displayed prompting you to choose a connection type. Select [Storage].