Olympus Camera E Pl5 Instruction Manual

							41EN
Basic operations
2
  Protecting images
Protect images from accidental deletion. Display an image you 
wish to protect and press Q to display the playback menu. 
Select [0] and press Q, and then press F to protect the 
image. Protected images are shown by a 0 (protect) icon. 
Press G to remove protection. 
You can also protect multiple selected images.  g “Selecting 
images” (P. 21)
2012.10.0112:3020100-0020LN4 :
3
0 (protect) icon
# Cautions
•  Formatting the card erases all images even if they have been protected.
  Audio recording
Add an audio recording (up to 30 sec. long) to the current photograph.
1 Display the image to which you want to add an 
audio recording and press  Q.
•  Audio recording is not available with protected images.
•  Audio recording is also available in the playback menu.
2 Select [R] and press Q.
•  To exit without adding a recording, select [No].
JPEG
mR

						

							42EN
Basic operations
2
  Slideshow
This function displays images stored on the card one after another.
1 Press Q during playback and select m.JPEG
mR

						

							43EN
Basic operations
2
 Using the touch screen
You can use the touch screen during playback or when framing pictures in \
the monitor. 
You can also use the touch screen to adjust settings in the live guides a\
nd super 
control panel.
 Live guides
The touch screen can be used with live guides. 
g “Using live guides” (P. 31)
1 Touch the tab and swipe your fi nger to the 
left to display live guides.
•  Tap to select items.
2 Use your fi  nger to position the sliders.
• Tap 
a to enter the setting.
•  To cancel the live guide setting, tap  k on the 
screen.
250250F5.601:02:0301:02:033838
LNHD
ISO-A200
Ta b
 Shooting mode
You can focus and shoot by tapping the monitor. 
Ta p  
 to cycle through touch screen settings.
This function is not available when [Movie Effect] is 
[On] in  n
 mode.
250250F5.6 0.00.0
ISO200
P01:02:0301:02:033030
LNHD
Touch screen operations disabled.
Tap a subject to focus and automatically release 
the shutter. This function is not available in  n
 
mode.
Tap to display an AF target and focus on the 
subject in the selected area. You can use the 
touch screen to choose the position and size of 
the focus frame. Photographs can be taken by 
pressing the shutter button.
  Previewing Your Subject (  )
1 Tap the subject in the display.
•  An AF target will be displayed.
•  Use the slider to choose the size of the frame.
14141010
77
5x5x250250F5.6 0.00.0
ISO200
P 
						

							44EN
Basic operations
2
2 Use the slider to choose the size of the 
target frame, and then tap E to zoom in 
on the subject of the target frame.
• Use your fi nger to scroll the display when the 
picture is zoomed in.
•  Tap [1x] to cancel the zoom display.1x
Playback mode
Use the touch screen to page through images or zoom in and out.
 Full-frame playback
Viewing additional images
• Slide your  fi nger to the left to view later frames, right to 
scroll view earlier frames.
• Keep your  fi nger on the edges of the display to scroll 
continuously backward or forward through pictures.
Playback zoom
•  Slide the bar up or down to zoom in or out.
• Use your  fi nger to scroll the display when the picture is 
zoomed in.
• Tap  F to display Index playback. 
For calendar playback, tap  F until the calendar is 
displayed.
 Index/Calendar Playback
Page ahead/Page back
• Slide your  fi nger up to view the next page, down to view 
the previous page.
• Use  t or u to choose the number of images 
displayed.
•  For single-frame playback, tap  u until the current 
image is displayed full frame.
2012.10.0112:30
Viewing images
•  Tap an image to view it full frame. 
						

							45EN
Basic operations
2
Adjusting Settings
Settings can be adjusted in the super control panel. g “Using the super control 
panel” (P. 84)
1 Display the super control panel.
• Press  Q to display the cursor.
250250F5.6Super FineOffmallNORMISOAUTO
AUTOWBAUTO
+RAW+RAW4:3
Recommended ISO
AEL/AFLS-ISP3636
2 Tap the desired item.
•  The item will be highlighted.
250250F5.6Normali
WB
NORMAUTO4:3AEL/AFL01:02:0301:02:0310231023+2.0+2.0S-IS
3 Rotate the dial to choose an option.
# Cautions
•  The situations in which touch screen operations are not available includ\
e the following.
Panorama/3D/e-portrait/multiple exposure/during bulb or time photography\
/one-touch 
white balance dialog/when buttons or dials are in use
•  In self-timer mode, the timer can be started by tapping the display. Tap again to stop the  timer.
•  Do not touch the display with your  fi ngernails or other sharp objects.
•  Gloves or monitor covers may interfere with touch screen operation.
•  You can also use the touch screen with the  ART and SCN menus. Tap an icon to select 
it. 
						

							46EN
Frequently-used options and customization
3
3
 Frequently-used options and 
customization
 Using live control
The live control can be used to adjust settings in P, A, S, M, and n
 modes. Using 
live control allows you to preview the effects of different settings in the monitor.
AUTOAUTOPWB AutoAUTOAUTO
WBAUTOWBWBWBAUTOAUTOAUTO
LF4:3
jWBAUTOWBWBWBAUTOAUTOAUTO
HD
S-ISS-IS
WBWB
Functions
Settings
 Available settingsImage stabilizer ....................................P. 47
Picture mode ........................................P. 48
Scene mode .........................................P. 29
Art fi  lter mode .......................................P. 28
n mode ...............................................P. 49
White balance .......................................P. 50
Sequential shooting/self-timer ..............P. 35
Aspect ratio...........................................P. 51 Record mode ........................................P. 52
Flash mode ...........................................P. 33
Flash intensity control ...........................P. 53
Metering mode......................................P. 54
AF mode ...............................................P. 55
ISO sensitivity .......................................P. 56
Face priority ..........................................P. 56
Movie sound record ..............................P. 57
 1 Press Q to display the live control.
•  To hide the live control, press 
Q again.
2 Use FG to select the settings, 
use HI to change the selected 
setting, and press Q.
•  The selected settings take effect 
automatically if no operations are 
performed for about 8 seconds.
AUTOAUTOPWB AutoAUTOAUTO
WBAUTOWBWBWBAUTOAUTOAUTO
LF4:3
jWBAUTOWBWBWBAUTOAUTOAUTO
HD
S-ISS-IS
WBWB
CursorDisplays the selected  function name
Arrow pad
Cursor
Arrow 
pad
# Cautions
•  Some items are not available in some shooting modes.
% Tips
•  For more advanced options or to customize your camera, use the menus to \
make 
settings. g “Using the menus” (P. 58) 
						

							47EN
Frequently-used options and customization
3
  Reducing camera shake (image stabilizer)
You can reduce the amount of camera shake that can occur when shooting in\
 low light 
situations or shooting with high magnifi cation.
1 Display the live control and select the image 
stabilizer item using  FG.
LF4:3
j
P
WBAUTOWBWBWBAUTOAUTOAUTO
mmmm5050HD
S-ISS-IS
S-ISS-ISS-ISS-ISS-ISS-ISOFFOFF
Focal LengthAuto
2 Select an option with  HI and press Q.
Still 
picture OFF IS Off 
Image stabilizer is off.
S-IS1 Auto Image stabilizer is on.
S-IS2 Vertical IS Image stabilization applies only to vertical 
(Y) camera shake. Use when panning the 
camera horizontally.
S-IS3 Horizontal IS Image stabilization applies only to horizontal 
(Z) camera shake. Use when panning the 
camera horizontally with the camera held in 
portrait orientation.
Movie OFF IS Off
Image stabilizer is off.
M-IS1 Movie-I.S. In addition to Auto image stabilization, camera 
shake that occurs when shooting while 
walking is also reduced.
M-IS2 Auto Image stabilization applies to camera shake in 
all directions.
Choosing a focal length (Micro Four Thirds/Four Thirds System lenses ex\
cluded)
Use focal length information to reduce camera shake when shooting with l\
enses that are not 
Micro Four Thirds or Four Thirds system lenses. •  Select [Image Stabilizer], press the INFO button, use HI to select a focal length, and  press Q.
•  Choose a focal length between 8 mm and 1000 mm.
•  Choose the value that most closely matches to the one that is printed on\
 the lens.
# Cautions
•  The image stabilizer cannot correct excessive camera shake or camera sha\
ke that occurs  when the shutter speed is set to the slowest speed. In these cases, it i\
s recommended 
that you use a tripod.
•  When using a tripod, set [Image Stabilizer] to [OFF].
•  When using a lens with an image stabilization function switch, priority \
is given to the lens  side setting.
•  You may notice an operating sound or vibration when the image stabilizer \
is activated.
•  The image stabilizer will not activate at shutter speeds of over 2 secon\
ds. 
						

							48EN
Frequently-used options and customization
3
  Processing options (picture mode)
Select a picture mode and make individual adjustments to contrast, sharp\
ness, and 
other parameters. Changes to each picture mode are stored separately.
1 Display the live control and select [Picture Mode].
AUTOAUTOPNatural
WBAUTOWBWBWBAUTOAUTOAUTO
LF4:3HD
S-ISS-IS
MCj jihj44j55
j
j
2 Select an option with FG and press Q.
hi-Enhance
Produces more impressive-looking results suited to the scene.
i Vivid
Produces vivid colors.
j Natural
Produces natural colors.
Z Muted
Produces fl at tones.
a Portrait
Produces beautiful skin tones.
Monotone Produces black and white tone.
Custom Select one picture mode, set the parameters, and register the 
setting. 
j Pop Art
Choose an art fi lter and select the desired effect.
k
Soft Focus
l Pale&Light Color
m Light Tone
n Grainy Film
o Pin Hole
s Diorama
t Cross Process
u Gentle Sepia
v Dramatic Tone
Y Key Line
Z Watercolor 
						

							49EN
Frequently-used options and customization
3
 Adding effects to a movie
You can create movies that take advantage of the effects available in still photography 
mode. Set the dial to n
 to enable the settings.
1 After selecting  n
 mode, display the live control 
(P. 46) and use FG to highlight the shooting mode.
PPnPPAA SSMM
WBAUTOWBWBWBAUTOAUTOAUTO
M•ISM•IS
PPS-AFS-AF
Program Auto
j2
FullHDF
2 Use HI to choose a mode and press  Q.
POptimal aperture is set automatically according to the brightness of the\
 
subject.
A Depiction of background is changed by setting the aperture. Use 
FG to 
adjust the aperture.
S Shutter speed affects how the subject appears. Use 
FG to adjust the 
shutter speed. Shutter speed can be set to values between 1/30 s and 
1/4000 s.
M You control both aperture and shutter speed. Use 
HI to choose the 
aperture, FG to select the shutter speed from values between 1/30 s and 
1/4000 s. Sensitivity can be set manually to values between ISO 200 and \
3200; auto ISO sensitivity control is not available.
# Cautions
•  When recording a movie, you cannot change the settings for exposure comp\
ensation, 
aperture value, and shutter speed.
•  If [Image Stabilizer] is activated while recording a movie, the recorded\
 image is enlarged  slightly.
•  Stabilization is not possible when the camera shake is excessive.
•  When the inside of the camera becomes hot, shooting is automatically sto\
pped to protect  the camera.
•  With some art fi  lters, [C-AF] operation is limited.
•  Cards with an SD speed class of 6 or above are recommended for movie rec\
ording. 
						

							50EN
Frequently-used options and customization
3
  Adjusting color (white balance)
White balance (WB) ensures that white objects in images recorded by th\
e camera 
appear white. [AUTO] is suitable in most circumstances, but other values can be 
selected according to the light source when [AUTO] fails to produce the desired results 
or you wish to introduce a deliberate color cast into your images.
1 Display the live control and select the white 
balance item using FG.
2 Select an option using  HI and press Q.
AUTOAUTOPWB AutoAUTOAUTO
WBAUTOWBWBWBAUTOAUTOAUTO
LF4:3
jWBAUTOWBWBWBAUTOAUTOAUTO
HD
S-ISS-IS
WBWB
WB modeColor 
temperature Light conditions
Auto white 
balance AUTO
kUsed for most light conditions (when there is a 
white portion framed on the monitor). Use this 
mode for general use.
Preset 
white 
balance 5
5300K For shooting outdoors on a clear day, or to 
capture the reds in a sunset or the colors in a 
fi
 reworks display
N 7500K For shooting outdoors in the shadows on a clear 
day
O  6000K For shooting outdoors on a cloudy day
1  3000K For shooting under a tungsten light
> 4000K For subjects lit by 
fl uorescent lights
n 5500K For fl
 ash shooting
One-touch 
white 
balance 
(P. 51) P/QColor 
temperature  set by one-touch WB. Choose when a white or gray subject can be 
used to measure white balance and the subject 
is under mixed lighting or lit by an unknown type 
of fl
 ash or other light source.
Custom 
white 
balance CWB
2000K –  
14000K After pressing the INFO button, use HI 
buttons to select a color temperature and then 
press Q.