OKI C8800n User Manual

C8800 User’s Guide101
System Configuration Menu
This menu adjusts general printe r settings to suit the way you 
prefer to work.
Notes:
Factory default settings are shown in 
bold.
Settings with a dagger (†) only appear when the 
appropriate option  is installed.
  
ItemsSettingsExplanation
POWER SAVE 
DELAY TIME 5
 
15  
30   
60  
240
minutes Adjusts the idling time before the 
printer automatically switches into 
power saving mode. In this mode 
power consumption is reduced to a low 
level required...

C8800 User’s Guide102
WAIT TIMEOUT 5~ 40~300, 
OFF
seconds Specifies how many seconds the printer 
will wait when received data pauses 
before forcing a page eject. In 
PostScript Emulation mode the job will 
be cancelled if timeout occurs.
LOW TONER CONTINUE  
STOP Specifies whether the printer should 
continue printing even after a low toner 
condition is detected.
JAM RECOVERY ON   
OFF Specifies whether the printer should 
perform jam recovery after a paper jam 
has occurred. 
If ON, the printer...

C8800 User’s Guide103
PCL Emulation Menu
This menu controls settings  effective when the printer is 
operating in PCL emulation mode.
Notes:
Factory default settings are shown in 
bold.
Settings with a dagger (†) only appear when the 
appropriate option  is installed.
  
ItemSSettingsExplanation
FONT SOURCE RESIDENT / 
DIMM0 /   
DIMM1 / 
DOWNLOADED Specifies the location of the PCL default 
font. Normally this will be INTERNAL 
unless additional font
s are installed in 
the expansion ROM slot or...

C8800 User’s Guide104
TRUE BLACK OFF / ON Selects whether black image data is 
printed using black toner (ON) or 100% 
CMY (OFF). (Valid in PCL emulation 
mode only.)
PEN WIDTH 
ADJUST ON
/OFF
TRAY ID# 1~ 4~59
5   Tray 2
4   MP TRAY 
ItemSSettingsExplanation
Downloaded From ManualsPrinter.com Manuals 

C8800 User’s Guide105
PPR Emulation Menu
This menu controls settings  effective when the printer is 
operating in PPR emulation mode.
Notes:
Factory default settings are shown in 
bold.
Settings with a dagger (†) only appear when the 
appropriate option  is installed.
    
ItemSettingsExplanation
CHARACTER 
PITCH 10 CPI
; 
12 CPI; 17 CPI;   
20 CPI; 
PROPORTIONAL Specifies character pitch in IBM PPR 
emulation.
FONT 
CONDENSE 12CPI - 
20CPI
; 12CPI - 
12CPI Specifies 12CPI pitch for Condense 
Mode....

C8800 User’s Guide106
LEFT MARGIN 0.0 Inch -  
1.0 Inch Specifies the distance of print from the 
left hand edge of the paper.
FIT TO LETTER Disable;  Enable   Sets the printing mode that can fit print 
data, equivalent to 11 inches (66 lines), 
in the LETTER-size printable area.
TEXT HEIGHT Same; Diff Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
Cont Paper 
Mode On, 
Off  
ItemSettingsExplanation
Downloaded From ManualsPrinter.com Manuals 

C8800 User’s Guide107
FX emulation
This menu controls settings  effective when the printer is 
operating in FX emulation mode.
Notes:
Factory default settings are shown in 
bold.
Settings with a dagger (†) only appear when the 
appropriate option  is installed.
  
ItemSettingsExplanation
CHARACTER 
PITCH 10 CPI
; 
12 CPI; 17 CPI; 
20 CPI; 
PROPORTIONAL Specifies character pitch in this 
emulation.
CHARACTER 
SET Set 1; 
Set 2   Specifies a character set.
SYMBOL SET IBM 437   Specifies a symbol set....

C8800 User’s Guide108
TEXT HEIGHT Same; Diff Sets the height of a character.
SAME: Regardless of CPI, same height.
DIFF: As CPI, character heights vary.
Cont Paper 
Mode On, 
Off  
ItemSettingsExplanation
Downloaded From ManualsPrinter.com Manuals 

C8800 User’s Guide109
Parallel Menu
This menu controls the operation of the printer’s Parallel data 
interface.
Notes:
Factory default settings are shown in 
bold.
Settings with a dagger (†) only appear when the 
appropriate option  is installed.
  
ItemSettingsExplanation
PARALLEL ENABLE / 
DISABLE Enables or disables the parallel port.
BI-
DIRECTIONAL ENABLE
 / 
DISABLE ENABLE/DISABLE the bi-directional 
capability of the parallel interface.
ECP ENABLE / 
DISABLE
ACK WIDTH NARROW / 
WIDE /MEDIUM
ACK /...

C8800 User’s Guide110
USB menu
This menu controls the operat ion of the printer’s USB data 
interface.
Notes:
When you have changed any  settings in the USB MENU, 
turn the printer OFF, then ON again.
Factory default settings are shown in 
bold.
    
ItemSettingsExplanation
USB ENABLE / 
DISABLE  ENABLES / DISABLES the USB port.
SOFT RESET ENABLE /  DISABLE   Enables or disables the SOFT RESET 
command.
SPEED 12 /  480 Mps Selects the interface speed.
OFFLINE 
RECEIVE ENABLE / 
DISABLE
  OFFLINE...