OKI C711dtn User Manual

31 – C610/C711 User’s Guide
Print Secure Job Menu    
Note:
This menu only displays if the optional SD card is 
installed or on a C610hdn with a hard disk drive 
installed.
ITEMACTIONEXPLANATION
Encrypted 
JobNot Found
Print
Delete
Used for printing an encrypted authentication 
print job (Encrypted Job) stored in the SD card.
After inputting a password, Searching Job is 
displayed until a job appropriate for the 
password is found.
(Searching time increases in proportion to the 
number of jobs stored in...

32 – C610/C711 User’s Guide
Stored JobNot Found
Print
Delete
Used to print out a stored job in the SD card.
Not Found will be displayed where a file, which 
could be printed is not available.
The following message will appear if a printable 
file is available.
Stored Job
Print
Delete
When  Print is selected,  Set Collating Amount 
is displayed and the number of pages to print 
can be specified.
Specify the number of pages to print and press 
the  Enter  button.
The following message will appear if...

33 – C610/C711 User’s Guide
Menus Menu 
ITEMACTIONEXPLANATION
Tr a y  
ConfigurationPaper feed 
Default: Tray 1
Select tray. Select by scroll and 
Enter button.
Auto Tray Switch 
Default:  On
Switches Auto ON/OFF. Select by 
scroll and  Enter button.
Tr a y  S e q u e n c e 
Default:  Down
Selects Tray sequence  Down/Up /
Paper feed Tray . Select by scroll 
and  Enter  button.
Unit of Measurement 
Default:  inches
Selects UOM inches or millimeter. 
Select by scroll and  Enter button.
Tr a y 1  C o n f i...

34 – C610/C711 User’s Guide
Tray 
Configuration 
(cont.)MP Tray Config
Paper Size:
•A4/A5/A6/B5
• Legal14/Legal 13.5/Legal13
• Letter
• Executive
•Custom
•Com-9 Envelope
•Com-10 Envelope
•Monarch Envelope
•DL Envelope
•C5
•Index Card
Configure Paper Size/Media 
Type/Media Weight/Tray 
Usage.
Select by scroll and Enter button.
Media Type:
• Plain
• Letterhead
• Film
•Labels
•Bond
•Recycled
•Card Stock
•Rough
• Glossy
•USERTYPE 1-5
USERTYPE 1 to 5 are displayed 
only if registered in the host PC.
Paper...

35 – C610/C711 User’s Guide
Tr a y  2  C o n f i g
Tr a y  3  C o n f i g
Note: only present if option 
installed
System Adjust Power Save Time
Default: 30
Select from  1/2/3/4/5/10/15/
30/60/120/180 Minutes . 
Select by scroll and  Enter button.
Sleep Time
Default:  10
Select from  1/2/3/4/5/10/15/
30/60/120/180 Minutes .
Select by scroll and Enter button.
Clearable Warning
Default: ONLINE
Select from:  ONLINE/Job . Select 
by scroll and  Enter button. PS job 
only.
Auto Continue
Default:  Off
Select...

36 – C610/C711 User’s Guide
System Adjust 
(cont.)
Paper Black Setting  
–2/–1/0/+1/+2
Default: 0
Used for fine adjustment of the 
black print on paper.
Paper color Setting 
–2/–1/0/+1/+2
Default: 0
Used for fine adjustment of the 
color print on paper.
Film Black Setting  
–2/–1/0/+1/+2
Default: 0
Used for fine adjustment of the 
black print on film.
Film Color Setting  
–2/–1/0/+1/+2
Default: 0
Used for fine adjustment of the 
color print on film.
SMR Setting  
+3/+2/+1/0/–1/–2/–3
Default: 0
To...

37 – C610/C711 User’s Guide
Admin Setup
ITEMSETTINGSEXPLANATION
Enter 
PasswordxxxxxxxxxxxxEnter a password to gain entry to 
the Admin Setup menu.
Password should be from 6 to 12 
digits of alpha/numeric 
characters (or mix) 
The default value is aaaaaa
Network 
SetupTCP/IPEnable
Disable
Sets TCP/IP Protocol.
Enable: TCP/IP Protocol is 
available.
Disable: TCP/IP Protocol is not 
available.
IP Version
IP v4 
IP v4+v6 
IP v6
Sets up the IP version.
Operates with IPv4 for IPv4 (not 
valid with IPv6)....

38 – C610/C711 User’s Guide
Network 
Setup
(cont.)
NetWareEnable
Disable
Sets Enable/Disable of NetWare 
Protocol.
EtherTalkEnable
Disable
Sets Enable/Disable of EtherTalk 
Protocol.
Frame TypeAuto
802.2
802.3
Ethernet II
SNAP
Sets the frame type.
Display Condition: Netware 
should be enabled.
IP Address 
SetAuto
Manual
Sets the IP Address setting 
method. 
Display Conditions:
• TCP/IP should be enabled.
• IP Version is not IPv6.
IPv4 
Addressxxx.xxx.xxx.xxxSets the IPv4 Address.
Display Conditions:
•...

39 – C610/C711 User’s Guide
Network 
Setup
(cont.)
Te l n e tEnable
Disable
Sets Enable/Disable of Telnet.
Enable: Telnet is available. 
Disable: Telnet is not available. 
Display Condition:TCP/IP should 
be enabled.
FTPEnable
Disable
Sets Enable/Disable of FTP.
Enable: FTP is available. 
Disable: FTP is not available. 
Display Condition: TCP/IP should 
be enabled.
IPSecEnable
Disable
Sets Enable/Disable of IPSec. 
Enable via the web.
Enable: IPSec is available.
Disable: IPSec is not available....

40 – C610/C711 User’s Guide
Network 
Setup
(cont.)
Factory 
Defaults?ExecuteSpecifies whether to initialize the 
network factory default settings 
for the Network.
Print 
SetupPersonalityAuto
PostScript
PCL
XPS
IBM PPR
EPSON FX
Selects a printer language.
Copies1- 999Selects the number of copies.
This setting is disabled for Local 
Print except for Demo Page.
DuplexOn/ OffSpecifies Duplex print (option) if 
a Duplex unit is installed and 
enabled
BindingLong Edge
Short Edge
Specifies Binding in duplex...