OKI C711dn User Manual

							
101 – C610/C711 User’s Guide
Fuser Replacement ______________
The fuser is located inside the printer just behind the four image 
drum units.
1.Press the cover release and op en the printer’s top cover 
fully.
2.Identify the fuser handle (a) on the top of the fuser unit.
WARNING
If the printer has recently  been powered on, some 
fuser components will be ve ry hot. Handle the fuser 
with extreme care, holding it  only by its handle, which 
will only be mildly warm to the touch. A warning label 
clearly indicates the area. If in doubt, switch the 
printer off and wait at leas t 10 minutes for the fuser 
to cool before open ing the printer cover.
b
b
a
Downloaded From ManualsPrinter.com Manuals 
						

							
102 – C610/C711 User’s Guide
3.Pull the two fuser retaining levers (b) towards the front of the 
printer so that they are fully upright.
4.Holding the fuser by its handle (a), lift the fuser straight up 
and out of the printer. If the fuser is still warm, place it on a 
flat surface which will not be damaged by heat.
5.Remove the new fuser from its packaging and remove the 
transit material.
6.Holding the new fuser by its hand le, make sure that it is the 
correct way round. The retaining levers
 (b) should be fully 
upright, and the two locating lugs
 (c) should be towards you.
7.Lower the fuser into  the printer, locating the two lugs (c) into 
their slots in the metal partition which separates the fuser 
area from the image drums.
bb
c
Downloaded From ManualsPrinter.com Manuals 
						

							
103 – C610/C711 User’s Guide
8.Push the two retaining levers (b) towards the rear of the 
printer to lock the fuser in place.
9.Finally, close the top cover and press down firmly at both 
sides so that the cover latches closed.
b
Downloaded From ManualsPrinter.com Manuals 
						

							
104 – C610/C711 User’s Guide
Cleaning the LED Head ___________
Clean the LED heads when printing does not come out clearly, has 
white lines or when text is blurred. There is no need to switch off 
the printer to clean the lens.
1.Press the cover release and op en the printer’s top cover 
fully.
2.Open the top cover.
Downloaded From ManualsPrinter.com Manuals 
						

							
105 – C610/C711 User’s Guide
3.Gently wipe the LED head surface with a clean, lint free cloth.
4.Close the top cover and press down firmly at both sides so 
that the cover latches closed.
CAUTION!
Do not use methyl alcohol or other solvents on the LED 
head as damage to the lens surface will occur.
Downloaded From ManualsPrinter.com Manuals 
						

							
106 – C610/C711 User’s Guide
Utilities
Summary of Utilities Provided ________
Utilities on the CD 
For more information, click “Tell me more” on the Optional Utilities 
screen.
Windows
•Admin Manager 
For quick discovery and setup of the Oki network card in 
your printer. Runs directly off the CD.
•Direct Network Printing Utility (LPR) 
For printing on an Ethernet network without the need for a 
print server.
•Network Extension 
For use when your printer is connected over a TCP/IP 
network. Check the printer status and configuration from 
the Printer )Properties tab in the printer driver.
•Color Swatch Utility 
Print a color swatch and use the indicated RGB values to 
set up the color(s) of your choice in your graphics/design 
software application. 
•PDF Print Direct 
Print pdf files without first op ening them in an application.
•Display Language Utility 
Use to change the language of the printer’s display. 
Macintosh
•Color Correct Utility 
Fine tune the printer’s color settings (pallet color. gamma 
value/hue) and save them for future use.
•Op Panel Language Utility 
Use to change the language of the printer’s display.
•Profile Assistant 
Helps you to load and manage color profiles.
•NIC Setup Utility 
Use to set up the [printer network card.
•Storage Device Manager 
Requires the hard disk drive, optional on some models. 
Downloaded From ManualsPrinter.com Manuals 
						

							
107 – C610/C711 User’s Guide
Download PCL macros, Postscript forms and bar codes to 
the printer hard disk drive for use in print jobs
•Swatch Utility 
Print a color swatch and use the indicated RGB values to 
set up the color(s) of your choice in your graphics/design 
software application.
•PS Gamma Adjuster 
Customize the CMYK data curves used with your printer 
driver. Once you have created the customized curve in the 
utility, you must save the curve (new PPD) and reconfigure 
your printer driver to use the new PPD.
•Job Accounting 
Use to control printer access and to monitor consumables 
usage.
Utilities on the Web (Windows Only)
Here is a list of the utilities pr ovided via a download from the 
internet, accessed through the Menu Installer on the CD. For more 
information, click “Tell me more”  on the Internet Options screen in 
the CD installer.
•PrintSuperVision 
View the real-time status of printers, monitor and report 
printer usage, manage consumables, check on the status 
of printers in the same depa rtment, the same building, the 
same country or on the other side of the world.
•Color Correct Utility 
Helps adjust how RGB colors  are printed: office palette 
tuning, hue/saturation/gamma tuning.
•Storage Device Manager 
Requires the hard disk drive, optional on some models. 
Download PCL macros, Postscript forms and bar codes to 
the printer hard disk driv e for use in print jobs.
•Job Accounting Utility 
Use to control printer access and to monitor consumables 
usage.
•Profile Assistant 
Requires the hard disk drive, optional on some models. 
Store ICC profiles to the [printer’s hard disk drive.
Downloaded From ManualsPrinter.com Manuals 
						

							
108 – C610/C711 User’s Guide
•PS Gamma Adjuster 
Permits adjustment of each of the primary colors that the 
printer uses in Postscript mode.
Installing the Utilities ____________
Utilities on the CD
Load the utilities from the Menu Installer located on the CD 
supplied with your printer.
Download Utilities (Windows only)
Download the utilities from the internet, accessed through the 
Menu Installer on the CD.
Downloaded From ManualsPrinter.com Manuals 
						

							
109 – C610/C711 User’s Guide
Specifications
Specifications are subject to change without notice. 
ITEMSPECIFICATION
Dimensions C610: 17.1” W x 21.5” D x 13.4” H (435 x 547 x 340 
mm) without Duplex unit
C711:  17.1” W x 21.5” D x 15.3” H (435 x 547 x 
389 mm) without duplex unit
We i g h t C610: 57.3 lbs. (26 kg) approx. (without Duplex unit)
C711:  60.8 lbs. (27.6 kg) approx. (without Duplex unit)
Power supply 120 V ac  220 to 240 V ac @ 50/60 Hz ± 2%
Power 
consumption Operating: 1200 W max.; 600 W average (77°F / 25°C)
Stand-by: 100 W average (77 °F / 25 °C)
Power saving: 15 W max.
Sleep: approx. 1 W (77 °F / 25 °C)
Operating 
environment Operating: 50 to 89.6 °F (10 to 32 °C)/20 to 80% RH
 
  [optimum 77 °F (25 °C) wet, 35.6 °F (2 °C) dry]
Off: 32 to 109.4°F (0 to 43 °C)/10 to 90% RH  
  [optimum 80°F (26.8 °C) wet, 35.6°F (2 °C) dry]
Print 
environment Mono Printing:
30 to 73% RH @ 50 °F (10 °C)
 
30 to 54% RH @ 89.6 °F (32 °C)
50 to 89.6 °F (10 to 32 °C) @ 30% RH  
50 to 80.6 °F (10 to 27 °C) @ 80% RH
Color Printing:
62.6 to 80.6 °F (17 to 27 °C) @ 50 to 0% RH
Noise
(Sound 
pressure level) Operating: 54 dB(A)
Standby: 37dB(A)
Downloaded From ManualsPrinter.com Manuals