OKI C6150n User Manual

							C6150 User’s Guide
211
Windows
Individual Print Jobs
1.Open the file you want to print.
2.Click File → Print.
3.Click on the Color tab.
4.At Grayscale, make your selection.
If the box has a check mark, the feature is ON.
If the box is empty, the feature is OFF.
5.Change any other settings as desired.
6.Click Print.
7.The document prints.
All Print Jobs (Default)
1.Click Start → Settings →  Printers [Printers and Faxes 
in Windows XP/Server 2003].
2.Right-click the printer name.
3.Select Properties.  Click Printing Preferences.
4.Click on the Color tab.
5.At Grayscale, make your selection.  
If the box has a check mark, the feature is ON.
If the box is empty, the feature is OFF.
6.Change any other settings as desired.
7.Click Print.
8.The document prints.
    
NOTE
Once Grayscale is set as the default, you must 
select either Auto Color or Manual Color on the 
Color tab when you print color documents.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
212
Macintosh
OS 10.2 and 10.3
1.Open the file you want to print.
2.Click File → Print.
3.Open the drop-down list below Presets.  Select Color.
4.Below Color Mode, at Gray Scale, make your selection.
If the box has a check mark, the feature is ON.
If the box is empty, the feature is OFF.
5.Change any other settings as desired.
6.Click Print.
Color Matching ____________________
Color Synch
Macintosh OS 10.3
1.To access the print features, open your print driver from 
within an application by selecting File → Print.
2.Open the drop-down list below Presets.  Select Color 
Synch.
3.At Color Conversion, select Standard.
4.At Quartz Filter, make your selection.
Choices are:  
None, Black & White, Blue Tone, Gray Tone, Lightness 
Decrease, Lightness Increase, Reduce File Size, Sepia 
Tone, and Add Filters.
The following section has examples and explanations of 
each filter. 
       
NOTE
To see the affect of any of these filters on your 
document, select Add Filters.  Click the filter in 
the list.  Click Apply.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
213
Filters
None
The default. No filters are applied to the document.
    C32_Mac_10.3_11a.jpg   
Black & White
Converts the document to black and white, with no gray 
shades.
    C32_Mac_10.3_11b.jpg  
Blue Tone
Converts the document to shades of blue.
       C32_Mac_10.3_11c.jpg    
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
214
Gray Tone
Converts the document to shades of gray.
        C32_Mac_10.3_11d.jpg    
Lightness Decrease (A) / Lightness Increase (B)
Darkens or lightens the document. The middle picture below is 
with no filters applied.
   C32_Mac_10.3_11e.jpg,  C32_Mac_10.3_11a.jpg, 
C32_Mac_10.3_11f.jpg 
           
Reduce File Size
This filters the document to reduce its file size.
Sepia Tone
Converts the document to shades of brown.
    C32_Mac_10.3_11g.jpg      
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
215
Add Filters
Clicking this brings up a Preview screen.  
Here you can see the effect produced by selecting any of the 
standard filters.
To do this, click the name in the Filters box.  Then, click Apply.
You can also
•add New filters of your choice
•Delete filters you have added to the list
•set color conversion options such as Rendering Intent 
(Automatic, Perceptual, Relative, Saturation, Absolute), 
etc.     C32_Mac_10.3_11.jpg        
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
216
Custom Page Sizes _________________
General Information
Custom Page Size allows you to setup your printer (by 
customizing settings in your printer driver) to work with non-
standard size sheets of print media. 
You save the settings. Then, the saved settings can be used for 
printing, the same way you use standard page sizes.
To use Custom Page Size, you must complete two steps.
1.You must set up your custom page in your printer driver.
This is also known as registering the custom page.
2.To use a registered custom page, you must select it when 
you print a document. 
For more information,
Custom Size Ranges:  see page 217
Restrictions:  see page 218
Special Print Media:  see page 219
Windows PostScript:  see page 220
Windows PCL:  see page 221
Macintosh OS 10.2 and 10.3:  This feature does not work 
with these operating systems.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
217
Custom Size Ranges
Tray 1 and Tray 2  
The range varies slightly, depending on the printer driver. 
Printing may not work on papers longer than 18 inches (457.2 
mm). 
Width:  2 to 12.9 inches [51 to 328 mm]
Length:  5 to 47.25 inches [128 to 1200 mm]
MP Tray  
The range varies slightly, depending on the printer driver. 
Printing may not work on papers longer than 18 inches (457.2 
mm). 
Width:  2 to 12.9 inches [51 to 328 mm]
Length:  5 to 47.25 inches [128 to 1200 mm]
Banners 
from 8¼ to 8½ (210 to 215.9 mm) wide by up to 
47¼ (1.2 m) long. Banners must be fed one sheet at 
a time.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
218
Restrictions 
1.Custom Page Size may not work with all software 
applications.
2.Custom page sizes can only be printed from the manual 
feed (multi purpose (MP) tray).
• one-sided printing only
• rear exit only.
If the sheet of paper you are using is too long to be 
supported by the MP tray, use your hands.
3.Custom page sizes can only be printed to the face-up exit 
(straight-through paper feed/rear exit).
4.Before using Custom Paper Size, you must change the 
printer driver setting for the multi-purpose tray Paper 
(Media) Size to Custom Paper Size. 
5.The paper size must be set to portrait (Width is less than 
Length).
6.If you use Custom Page, and are not satisfied with the 
print quality, try setting the PRINT QUALITY to Normal or 
Quick.
7.The number of custom page sizes that can be defined 
varies according to the type of the printer driver and the 
operating system.
PostScript:  One 
PCL:  up to 32 
8.Most applications allow the printer properties to be 
accessed from within the document print dialog box.
Settings in your applications override settings in the 
printer driver.
Settings in the printer driver override settings in the 
printer menus.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
219
Special Print Media (Paper)
If you are using heavy media, transparencies, envelopes or 
labels, use the face up (straight through) paper feed path.          
If the Ultra Heavy setting does not give proper toner fusion, 
you can try the Label settings.See “Driver Settings” on 
page 17.
For face up printing (straight-through path), make sure the 
rear exit is open and the paper support is extended.                
•Paper is stacked in reverse order.
•Tray capacity is about 100 sheets.
Actual capacity depends on paper weight.             
    C96_StraightThruStackerOpen1.jpg    
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
220
Windows PostScript 
For more information,  
General Information:  see page 216
Custom Size Ranges:  see page 217
Restrictions:  see page 218
Special Print Media (Paper):  see page 219
1.Open the file you want to print. 
2.Click File → Print. 
3.Select your printer.  
4.Click Properties. 
5.Click the Layout tab.
6.Under Tray Selection, in the Paper Source drop-down list, 
select Multi Purpose Tray.
7.Click Advanced. 
8.Below Paper/Output, click the down arrow to open the 
drop-down list.
9.Click “PostScript Custom Page Size.”
10.Enter the width and length measurements. 
See “Custom Size Ranges” on page 217.  
11.Select the Paper Feed Direction.
Long Edge First = media feeds in long edge first  
Short Edge First = media feeds in short edge first  
Long Edge First (flipped) = Reserved for future use. 
Short Edge First (flipped) = Reserved for future use. 
12.Change any other settings as desired.
13.Click OK.
14.The Advanced Options screen appears.
15.Change any other settings as desired.
16.Click OK.
17.The Paper Quality tab screen appears.
18.Change any other settings as desired.
19.Click OK.
20.The main Print screen appears.
21.Change any other settings as desired.
22.Click OK.  The document prints.
Downloaded From ManualsPrinter.com Manuals