OKI C6150hdn User Manual

							C6150 User’s Guide
201
7.From the RGB Profile source, select the ICC profile that 
corresponds to the device you are trying to match such 
as your monitor, scanner or digital camera.
Remember that the names “RGB Source 1”, “RGB 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
Select [color – Graphic Pro 2].      
From the [Printer Output Profile] menu, select your 
printer profile.
If [Auto] is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here and choose a rendering intent.
Mac OS 10.2 and 10.3
1.Choose [File] → [Print].  
2.From the [Printer] menu, select your printer model.
3.Select [Printer Features].
4.From the [Feature Sets] menu, select [Color Options].
5.From the [color Mode] menu, select [Graphic Pro].
6.From the [Feature Sets] menu, select [Color - Graphic 
Pro 1].  
7.From the [Color Matching Task] menu, select [ICC Profile 
color Matching].
8.From the [Feature Sets] menu, select [Color - Graphic 
Pro 2].     
9.From the [RGB Profile source], select the ICC profile that 
corresponds to the device you are trying to match such 
as your monitor, scanner or digital camera.
Remember that the names “RGB Source 1”, “RGB 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
10.From the [Feature Sets] menu, select [color - Graphic 
Pro 3]. 
11.From the [Printer Output Profile] menu, select your 
printer profile.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
202
If Auto is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here and choose a rendering intent.
Simulating another printer – RGB source data
The Graphic Pro color matching system can be used to 
simulate the color output of another printer.
    graphicpro-RGBmatch.eps   
     
     
To simulate the output of another printer, you need to 
download at least 2 profiles to your printer using Profile 
Assistant:
1. RGB data 2. Printed document
3. RGB source profile 4. Scanner, monitor, camera, etc.
5. Printer output profile 6. Leave on Auto or select your custom profile.
Important!
Be aware that if the device you are trying to 
simulate has different color capabilities from 
your own printer, exact color simulation will not 
be possible. For example, it may be difficult to 
reproduce the exact colors of an inkjet printer 
on a toner-based printer.
Additionally, differences in the range of 
printable colors between different devices can 
make simulation using RGB source data 
inaccurate. To achieve best results when 
simulating the color output of other printers, 
you are strongly advised to use CMYK data as a 
source. See CMYK Ink Simulations on page  206.
12
56
34
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
203
•RGB Source Profile
•Simulation Target Profile
•Printer Output Profile (optional)
Once the profile(s) have been downloaded, make the 
appropriate selections in the printer driver. These are 
described in the next section (Windows page 203, Mac OS 9 
page 204, Mac OS X page 205).
Windows
This information applies to the Windows PCL 5c, PCL 6 and 
PostScript drivers.  
If you are using a source RGB document, simulate the output 
of another printer by making the following selections in the 
printer driver:
1.On the printer driver [color] tab, select [Graphic Pro] and 
click [Options].    
2.Select [Printer Simulation].
3.Select the ICC profile that corresponds to the device 
used to capture or display your source document - this 
could be a monitor, scanner or digital camera.
Remember that the names “RGB Source 1”, “RGB 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
4.Select a Simulation Target Profile.
This profile corresponds to the printer you want to 
simulate.
If you wish to produce black and grey colors that are 
printed using only black toner, enable the [Preserve 
Black] option. Although this produces a better quality 
print, the black and grey colors will not be simulated 
accurately.
5.Select your printer output profile.
If [Auto] is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here and choose a rendering intent.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
204
Mac OS 9 / Classic
If you are using a source RGB document, simulate the output 
of another printer by making the following selections in the 
printer driver:  
1.Choose [File] → [Print].
2.From the [Printer] menu, select your printer model.
3.Select [Color Options].
4.Choose [Color Mode] → [Graphic Pro].
5.Choose [Color] → [Graphic Pro 1].  
6.Choose [color Matching Task] → [Printer Simulation].
7.From the [RGB Profile source], select the ICC profile that 
corresponds to the device you are trying to match such 
as your monitor, scanner or digital camera.
Remember that the names “RGB Source 1”, “RGB 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
8.From the [Simulation Target Profile] menu (7), select the 
profile of the device you wish to simulate. 
Remember that the names “CMYK Source 1”, “CMYK 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
If you wish to produce black and grey colors that are 
printed using only black toner, enable the [Preserve 
Black] option. Although this produces a better quality 
print, the black and grey colors will not be simulated 
accurately.
9.Choose [Color] → [Graphic Pro 2].     
10.From the [Printer Output Profile] menu, select your 
printer profile.
If [Auto] is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here and choose a rendering intent.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
205
Mac OS 10.2 and 210.3
1.Choose [File] → [Print].  
2.From the [Printer] menu, select your printer model.  
3.Select [Printer Features].
4.From the [Feature Sets] menu, [Color Options].
5.From the [color Mode] menu, select [Graphic Pro].
6.From the [Feature Sets] menu, select [color – Graphic 
Pro 1]. 
7.From the [color Matching Task] menu, select [Printer 
Simulation].
If you wish to produce black and grey colors that are 
printed using only black toner, enable the [Preserve 
Black] option. Although this produces a better quality 
print, the black and grey colors will not be simulated 
accurately.
8.From the [Feature Sets] menu, select [color – Graphic 
Pro 2].  
9.From the [RGB Profile source], select the ICC profile that 
corresponds to the device you are trying to match such 
as your monitor, scanner or digital camera.
Remember that the names “RGB Source 1”, “RGB 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
10.From the [Simulation Target Profile] menu, select the 
profile of the device you wish to simulate.
Remember that the names “CMYK Source 1”, “CMYK 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
11.From the [Feature Sets] menu, select [color – Graphic 
Pro 3].  
12.From the [Printer Output Profile] menu, select your 
printer profile.
If [Auto] is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here and choose a rendering intent.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
206
CMYK ink simulations – CMYK source data
The ICC-based color matching system can be used to simulate 
the output on commercial printing presses.  
You can select from the ink types most commonly used in 
different regions of the world:
•Euroscale – Europe
•SWOP – North America 
•To y o  –  J a p a n
To print CMYK Ink Simulations, you must use PostScript printer 
driver supplied. 
Although it is possible to perform CMYK ink simulations using 
the Office Color options in the printer driver, we recommend 
that you use the Graphic Pro color matching system to perform 
CMYK ink simulations, as this provides additional controls, 
such as using the “Preserve Black” feature, or specifying an 
alternative printer output profile.
Instructions on how to apply Ink Simulations appear in the 
next section (Windows page 206, Mac OS 9 page 207, 
Mac OS X page 208).
Windows
If you are using a source CMYK document, use the following 
printer driver settings to perform a CMYK Ink Simulation:    
1. CMYK data 4. Printed document
2. CMYK input profile 5. CMYK device you wish to simulate (e.g. SWOP 
press)
3. Printer output profile 6. Leave on Auto or select your custom profile
NOTE
This information applies to the Windows 
PostScript driver only.
12
56
34
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
207
1.On the printer driver [color] tab, select [Graphic Pro]  (1) 
and click [Options].
2.Select [ICC Profile color Matching] (2).
3.Select the [CMYK Input profile] (3) that corresponds to 
the device you are trying to match such as a SWOP or 
Euroscale Press. If you have another CMYK Ink profile 
that you wish to use, select it here as the appropriate 
“CMYK Source x” profile.
Remember that the names “CMYK Source 1”, “CMYK 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
Use the [Preserve Black] option to keep the original grey 
component (K channel) informati o n .  I f  [ P r e s e r v e  B l a c k ]  i s  
disabled, the grey components may be printed using a 
mixture of CMYK toner, instead of just K (black) toner. 
4.Select a Printer Output Profile (4).
If [Auto] is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here.
If you have selected a profile other than [Auto], select the 
[Rendering Intent] (5).
Mac OS 9 / Classic
If you are using a source CMYK document, use the following 
printer driver settings to perform a CMYK Ink Simulation:    
1.Choose [File] → [Print].
2.From the [Printer] menu (1), select your printer model.
3.Select [color Options] (2).
4.From the [color Mode] menu (3), select [Graphic Pro].
5.Select [color – Graphic Pro 1] (4).
6.From the [color Matching Task] menu (5), select [ICC 
Profile color Matching].
7.From the [CMYK Input Profile source] (6), select the 
CMYK Input profile that corresponds to the device you 
are trying to match such as a SWOP or Euroscale Press. 
If you have another CMYK Ink profile that you wish to 
use, select it here as the appropriate “CMYK Source x” 
profile.
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
208
Remember that the names “CMYK Source 1”, “CMYK 
Source  2” and so on relate to the number assigned to the 
profile using Profile Assistant. See “Using Profile 
Assistant” on page 198.
Use the [Preserve Black] option to keep the original grey 
component (K channel) informati o n .  I f  [ P r e s e r v e  B l a c k ]  i s  
disabled, the grey components may be printed using a 
mixture of CMYK toner, instead of just K (black) toner. 
8.Select [color – Graphic Pro 2] (7).
9.From the [Printer Output Profile] menu (8), select your 
printer profile.
If [Auto] is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here and choose a rendering intent.
Mac OS X1‘0.2 and 10.3
If you are using a source CMYK document, use the following 
printer driver settings to perform a CMYK Ink Simulation:  
1.Choose [File] → [Print].
2.From the [Printer] menu (1), select your printer model.
3.Select [Printer Features] (2).
4.From the [Feature Sets] menu (3), select [color 
Options].
5.From the [color Mode] menu (4), select [Graphic Pro].
6.From the [Feature Sets] menu (5), select [color – 
Graphic Pro 1].
7.From the [color Matching Task] menu (6), select [ICC 
Profile color Matching].
Use the [Preserve Black] option to keep the original grey 
component (K channel) informati o n .  I f  [ P r e s e r v e  B l a c k ]  i s  
disabled, the grey components may be printed using a 
mixture of CMYK toner, instead of just K (black) toner.
8.From the [Feature Sets] menu (7), select [color – 
Graphic Pro 2].
9.From the [CMYK Profile Type] menu (8), select [CMYK 
Input Profile].
10.From the [CMYK Input Profile source] (9), select the 
CMYK Input profile that corresponds to the device you 
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
209
are trying to match such as a SWOP or Euroscale Press. 
If you have another CMYK Ink profile that you wish to 
use, select it here as the appropriate “CMYK Source x” 
profile.
Remember that the names “CMYK Source 1”, etc., relate 
to the number assigned to the profile using Profile 
Assistant. See “Using Profile Assistant” on page 198.
11.From the [Feature Sets] menu, select [color – Graphic 
Pro 3] (10).
12.From the [Printer Output Profile] menu (11), select your 
printer profile.
If [Auto] is selected, the factory default profiles that are 
embedded in the printer will be used. If you have created 
a printer profile yourself using profile creation software, 
select it here and choose a rendering intent.
No Color Matching
Use this option to turn off all printer color matching.
No color correction occurs when selected. 
Use No Color Matching when you are using another color 
matching method in your application (such Color Simulation).
See “Ink Simulation” on page 313.
Printer driver settings for ICC profile creation or 
no color matching
If you are creating ICC profiles using third-party software, 
select [Disable color Matching for ICC Profile Creation]. This 
option switches off all printer color management and also 
prevents the printer from restricting toner layer thickness.
If you are using your application color matching, select [Use 
Application color Matching]. This option switches off all printer 
color management. (Mac OS 9 page 210, Mac OS X 
page 210.)
Windows
1.On the printer driver [Color] tab, select [Graphic Pro] (1) 
and click [Options].
2.Select [Disable Color Matching for Profile Creation] (2) if 
you are creating an ICC profile using third-party profile 
Downloaded From ManualsPrinter.com Manuals 
						

							C6150 User’s Guide
210
creation software. Select [Use Application color 
Matching] (3) if you wish to switch off all printer color 
management and use your application’s color matching.
Mac OS 9
1.Choose [File] → [Print].  
2.From the [Printer] menu (1), select your printer model.
3.Select [Color Options] (2).
4.From the [Color Mode] menu (3), select [Graphic Pro].
5.Select [Color – Graphic Pro 1] (4).
6.From the [color Matching Task] menu (5), select [Disable 
color Matching for Profile Creation] if you are creating an 
ICC profile using third-party profile creation software. 
Select [Use Application color Matching] if you wish to 
switch off all printer color management and use your 
application’s color matching.
Mac OS 10.2 and 10.3
1.Choose [File] → [Print].  
2.From the [Printer] menu (1), select your printer model.
3.Select [Printer Features] (2).
4.From the [Feature Sets] menu (3), select [color 
Options].
5.From the [color Mode] menu (4), select [Graphic Pro].
6.From the [Feature Sets] menu (5), select [color – 
Graphic Pro 1].
7.From the [color Matching Task] menu (6), select [Disable 
color Matching for Profile Creation] if you are creating an 
ICC profile using third-party profile creation software. 
Select [Use Application color Matching] if you wish to 
switch off all printer color management and use your 
application’s color matching.
Grayscale 
This option prints all documents as monochrome. 
No color prints. 
The printer interprets all colors as a variation of grays.
Downloaded From ManualsPrinter.com Manuals