OKI C5900CDTN User Manual

Menu functions> 131
TRUE BLACKOFF / ONSelects whether black image data 
is printed using black toner (ON) 
or 100% CMY (OFF). (Valid in PCL 
emulation mode only.)
PEN WIDTH 
ADJUST
Tr a y  I D #
MP TRAY4
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 

Menu functions> 132
PPR EMULATION
This menu controls settings effective when the printer is 
operating in PPR emulation mode.
ITEMSETTINGSEXPLANATION
CHARACTER 
PITCH10 CPI; 12 CPI; 17 
CPI; 20 CPI; 
PROPORTIONALSpecifies character pitch in IBM 
PPR emulation.
FONT 
CONDENSE12CPI - 20CPI; 
12CPI - 12CPISpecifies 12CPI pitch for Condense 
Mode.
CHARACTER 
SETSet 1; Set 2Specifies a character set.
SYMBOL SETIBM 437Specifies a symbol set.
LETTER 0 
STYLEDisable; Enable Specifies the style that replaces 
9BH...

Menu functions> 133
TEXT HEIGHTSame; DiffSets the height of a character.
SAME: Regardless of CPI, same 
height
DIFF: As CPI, character heights 
vary.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 

Menu functions> 134
FX EMULATION
This menu controls settings effective when the printer is 
operating in FX emulation mode.
ITEMSETTINGSEXPLANATION
CHARACTER 
PITCH10 CPI; 12 CPI; 17 
CPI; 20 CPI; 
PROPORTIONALSpecifies character pitch in this 
emulation.
CHARACTER 
SETSet 1; Set 2Specifies a character set.
SYMBOL SET IBM 437 Specifies a symbol set.
LETTER 0 
STYLEDisable; EnableSpecifies the style that replaces 
9BH with letter o and 9DH with a 
zero
ZERO 
CHARACTERNormal; Slashed Sets the zero to be...

Menu functions> 135
USB MENU
This menu controls the operation of the printer’s USB data 
interface.
NETWORK MENU
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
ITEMSETTINGSEXPLANATION
SOFT RESET ENABLE / 
DISABLEEnables or disables the SOFT RESET 
command.
SERIAL NUMBERENABLE / 
DISABLE
OFFLINE 
RECEIVEENABLE / 
DISABLE
SPEED12 / 480 MpsSelects the interface speed
ITEMSETTINGSEXPLANATION
TCP/IPENABLE / 
DISABLEEnables or disables this network 
protocol.
IP...

Menu functions> 136
MAINTENANCE MENU
This menu provides access to various printer maintenance 
functions.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To 
change, proceed as above.
GATEWAY 
ADDRESSxxx.xxx.xxx.xxxCurrent assigned gateway address. 
To change, proceed as above.
FAC TO RY 
DEFAULTSEXECUTE Reloads the settings present when 
the unit was setup by the 
manufacturer.
WEBENABLE / 
DISABLEEnables or disables Web config. 
facility.
TELNET ENABLE / 
DISABLEEnables or disables Telnet...

Menu functions> 137
USAGE MENU
This menu is for information only, and provides an indication of 
total usage of the printer and the expected life left in its 
consumable items. This is particularly useful if you do not have a 
full set of replacement consumables to hand and you need to 
know how soon you will need them.
PAPER BLACK 
SETTING–2~0~+2Used for small adjustment when you 
experience faded print or light 
specks / streaking in monochrome 
printing on white paper. Select a 
higher value to reduce...

Menu functions> 138
JOB LOG MENU
K TONER
C TONER
M TONER
Y TONER
Cartridge size and current toner level.
ITEMSETTINGEXPLANATION
JOB LOG ENABLE/
DISABLEPrints a list of jobs carried out 
on this printer.
ITEMEXPLANATION
Downloaded From ManualsPrinter.com Manuals 

Overlays and Macros (Windows only)> 139
OVERLAYS AND MACROS (WINDOWS ONLY)
WHAT ARE OVERLAYS AND MACROS?
If you would like to print on special stationery, such as forms and 
letterhead, but do not want to use pre-printed stationery, you 
can create your own using these advanced features.
You can use PostScript overlays to generate all your special 
stationery and store it in the printer for use whenever you need 
it. If you have chosen to install the PCL driver, macros perform a 
similar function.
You...

Overlays and Macros (Windows only)> 140
CREATING POSTSCRIPT OVERLAYS
Three steps are required to create an overlay:
1.Create the form data using your own application software 
and print it to a printer (.PRN) file.
2.Use the Storage Device Manager utility software supplied 
on CD with your printer to create a “project file,” import 
the.PRN file(s), and download the generated filter (.HST) 
file to the printer. The project file will contain one or more 
overlay images which are functionally related, such...