OKI C3450n User Manual

Using the printer software > 71
Administrator Settings
This menu is intended to be used only by designated staff.
1.On the User Settings window, select Display -> 
Administrator Menu. The User Settings menu is 
updated to include the Administrator menu options.
The Administrator Settings menu has the settable items, 
including access to the user menus. If you disable a menu 
from this tab, it does not appear on the User Settings tab.
Downloaded From ManualsPrinter.com Manuals 

Using the printer software > 72
2.To save your changes, click the Apply the changed 
settings icon (as shown below), in the top left hand 
corner. 
To undo a change, click the Undo changed settings icon.
21
NOTE
You can access the printer menu settings window direct by 
clicking Start, All Programs and selecting Okidata OKI 
3450.
Downloaded From ManualsPrinter.com Manuals 

Using the printer software > 73
It should be noted that many of these settings can be, and often 
are, overridden by settings made in the printer drivers. However, 
several of the driver settings can be left at “Printer Setting”, 
which will then default to the settings entered in these printer 
menus.
Factory default settings are shown in bold type in the following 
tables.
PRINTER MENU UTILITY (MAC ONLY)
There is no status monitor in Mac. You can change printer user 
settings through the Printer Menu...

Using the printer software > 74
PRINT MENU
This menu provides adjustment of various print job related 
functions.
MEDIA MENU
This menu provides adjustment to suit a wide range of print 
media.
PRINT MENU
ITEMSETTINGSEXPLANATION
COPIES1-999 Enter the number of copies of a document to 
be printed from 1 to 999.
MANUAL FEED 
(Multi Purpose 
Tr a y )ON/OFFSelects the default tray for paper feed, 
Cassette Tray or Multi Purpose Tray.
MEDIA SIZE 
CHECKENABLE
DISABLEDetermines whether the printer checks the...

Using the printer software > 75
MANUAL (Multi 
Purpose Tray)
- PAPER SIZEA4 / A5 / A6 / 
B5LETTER
EXECUTIVE
LEGAL14
LEGAL13
LEGAL13.5
CUSTOM
COM-9 ENVELOPE
COM-10 ENVELOPE
MONARCH ENV
DL ENVELOPE
C5 ENVELOPE
BANNER 210 x 900 
BANNER 215 x 900 
BANNER 215 x 1200Selects the size of paper to be fed 
from the Multi Purpose Tray. For 
CUSTOM setting see X-DIMENSION 
and Y-DIMENSION later in this table.
MANUAL (Multi 
Purpose Tray)
- MEDIA TYPEPLAIN
LETTERHEAD
LABELS
BOND
RECYCLED
CARD STOCK
ROUGH
USERTYPE1 –...

Using the printer software > 76
COLOUR MENU
The printer automatically adjusts colour balance and density at 
appropriate intervals, optimising the printed output for bright 
white paper viewed in natural daylight conditions. The items on 
this menu provide a means of changing the default settings for 
special or particularly difficult print jobs. Settings revert to their 
default values when the next print job is complete.
COLOUR MENU
ITEMSETTINGSEXPLANATION
DENSITY 
ADJUSTMENT 
MODEAUTO
MANUALIf set to...

Using the printer software > 77
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you 
prefer to work.
SYSTEM CONFIGURATION MENU
ITEMSSETTINGSEXPLANATION
STATUS PAGE 
AUTO PRINTENABLED
DISABLEDAutomatically prints status on power up.
TIME TO POWER 
SAVE MODE5 MIN
15 MIN
30 MIN
60 MIN
240 MINAdjusts the idling time before the printer 
automatically switches into power saving 
mode. In this mode power consumption is 
reduced to a low level required to just 
keep the...

Using the printer software > 78
USB MENU
This menu controls the operation of the printer’s USB data 
interface.
SYSTEM ADJUSTMENT MENU
This menu provides access to USB settings for your printer.
USB MENU
ITEMSETTINGSEXPLANATION
SOFTWARE RESET ENABLED / 
DISABLEDEnables or disables the SOFT RESET 
command. (Only available on Windows 98 
and Windows Me.)
MAXIMUM SPEED12MBPS
480MBPSSpecifies the maximum transfer speed.
SERIAL NUMBERENABLED / 
DISABLEDSpecifies the USB serial number to 
differentiate between...

Using the printer software > 79
MAINTENANCE MENU
This menu provides access to various printer maintenance 
functions.
USAGE MENU
This menu is for information only, and provides an indication of 
total usage of the printer and the expected life left in its 
consumable items. This is particularly useful if you do not have a 
full set of replacement consumables to hand and you need to 
know how soon you will need them.
MAINTENANCE MENU
ITEMSETTINGSEXPLANATION
MENU RESET EXECUTE Resets menus to default...

Using the printer software > 80
PRINTING SETTINGS
To print a list of the printer settings:
1.Start the Status Monitor.
2.Select the Printer Setup tab.
3.Click on the Printer Settings button on the Printer Setup 
tab.
4.Click on the Information menu and then select Print Menu 
Map.
5.Click on the Printer Menu button to print a Menu Map of 
printer settings.
CHANGING THE DISPLAY LANGUAGE
If required, carry out the following instructions to change the 
language that is displayed in the Status Monitor....