OKI C330dn User Manual

							
Printing From Mac> 61
Color
Color mode
COLOR MODEDESCRIPTION
Auto Color The driver selects the most  appropriate color settings.
Advanced Color Allows you to  manually adjust color 
and black and white se ttings or select.
Grayscale Convert all colors to shades of grey.
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing From Mac> 62
Color matching 
Black Finish
Use this option to control the way black is printed in color 
documents. Select Composite Black (CMYK) to use all 4 
toner colors to represent black. This option is 
recommended for color photos. Select True Black (K) to 
use 100% black toner to represent black. This option is 
recommended for text and business graphics.
Brightness / Saturation
This option allows you to increase brightness for a lighter 
print. Modify saturation to change the strength (or purity) 
of a color.
If the printed colors are too strong, reduce saturation and 
increase brightness. As a general rule, reduce saturation 
by the same amount as you increase brightness. For 
example, if you reduce saturation by 10, increase 
brightness by 10 to compensate.
COLORDESCRIPTION
Monitor (6500K) 
Perceptual Optimised for printing photos. Colors are 
printed with emphas
is on saturation.
Monitor (6500K) 
Vivid Optimised for printing photos, but with 
even more saturated colors.
Monitor (9300K) Optimised for printing graphics from  applications such as Microsoft Office. 
Colors are printed with emphasis on 
Lightness.
Digital Camera Results will  vary depending on the 
subject and conditions the image was 
taken.
sRGB The printer reproduces the sRGB color  space. This might be useful if color 
matching from an sRGB input device 
such as a scanner or digital camera.
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing From Mac> 63
PRINTER SETUP OPTIONS
PRINTER OPTIONS
Media weight
Select the thickness or type of paper in the printer. It is 
important to set this correctly as it affects the temperature 
at which the toner is fused to the paper. For example, if 
you are printing on normal A4 paper, do not select Labels 
as this may cause toner smearing and paper jams.
Paper size check
Select Paper Size check if you want the printer to warn you 
when the document paper size is different from the paper 
in the printer.
A warning message is displayed and printing continues 
when you load the correct paper in the tray and press ON 
LINE. When this option is de selected, the printer uses the 
paper loaded in the selected tray regardless of the 
document size.
Feed manually from  Multi Purpose Tray
Select this option if you want the printer to wait until you 
press the  ON LINE button when feeding from the Multi 
Purpose Tray. This can be useful if printing on envelopes.
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing From Mac> 64
Always create 100% black (K) toner
Select this option if you want the printer to always use only 
black (K) toner when printing pure black (RGB = 0,0,0). 
This is effective even when Composite Black (CMYK) is 
selected in the color options.
Run maintenance cycle before printing
Depending on printing habits and usage patterns, running 
the maintenance cycle before printing may ensure the best 
possible print quality. This feature uses the printers image 
drums and transfer belt. The life of these printer 
consumables may be shortened if the printer runs a 
maintenance cycle frequently.
Print control
If you are using the Windows Print Control Server software to 
manage printers, enter your assigned user name and ID. This 
information is sent to the printer with your print job and is 
recorded by the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing From Mac> 65
Summary
This option displays a summary of all selected print options for 
the current job. 
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing> 66
PRINTING
This chapter describes how to carry out basic printing tasks using 
your printer.
TEST PRINTING
PRINT A DEMO PAGE
Switch on the printer and allow it to warm up. Press the ON LINE 
button on your printer and hold down for 5 seconds. A demo page 
should print.
PRINT A STATUS PAGE
Switch on the printer and allow it to warm up. To print a status 
page, hold down the  ON LINE button on your printer for 2 
seconds. A status page should print.
2-SIDED PRINTING (WINDOWS ONLY)
To carry out 2-sided, or Manual Duplex Printing you must pass 
paper through the printer twice. You can carry out 2-sided 
printing using the Cassette Tray  or the Multi Purpose Tray. 
2-sided Printing is supported on Windows operating systems 
only.
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing> 67
MANUAL DUPLEX PRINTING USING THE CASSETTE TRAY
1.Ensure that there is enough paper in the cassette tray to 
carry out the print job.
2. Select File -> Print and click the  Properties button. In 
the 2-sided printing drop down  menu, select either “Long 
Edge” or “Short Edge” according to your printing 
preferences. If you require fu rther information, click the 
Duplex Help  button. Then, Click the  Print button.  
3. Every second page of your document is printed first. 
When this is complete, the following a message appears 
on screen prompting you to take the paper, flip it and 
replace it in the Cassette Tray.
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing> 68
4.Open the Cassette Tray. 
5. Take the printed paper from the Output Stacker and place 
it in the Cassette Tray with the printed side facing up and 
the bottom of the page facing into the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing> 69
6.Close the Cassette Tray and press the  ON LINE button as 
directed in the status message. The message window 
should disappear from your screen and the document 
finishes printing the remaining pages of your document. 
MANUAL DUPLEX PRINTING USING THE MULTI PURPOSE TRAY
1. Position the paper guides on the Multi Purpose Tray 
according to the paper size.
NOTE:
When using the Multi Purpose Tray, feed pages one sheet at 
a time. 
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing> 70
2.Place paper one sheet at a time in the Multi Purpose Tray. 
The paper is automatically gripped in position.
3. Select File -> Print to display the Print dialog box.
4. Click the  Properties  button. On the 2-sided printing drop 
down menu, select either “L ong Edge” or “Short Edge” 
according to your printing preferences. If you require 
further information, click the  Duplex Help button
5. When every second page has printed, take the paper from 
the output stacker..
6. Set the paper one page at a time in the Multi Purpose Tray 
with the printed side facing up and the bottom of the page 
Downloaded From ManualsPrinter.com Manuals