OKI C110 User Manual

91  -  C110 User’s Guide
Clearing Procedures
1Open the top cover.
NoteIf there is paper in the 
output tray, remove it, 
and then fold up the 
output tray before 
opening the top cover.
2Grab the handle and lift it up 
slightly to the back, and then 
slowly pull the imaging cartridge 
out vertically.
 
 
 
 
 
 
 
 
 
 
 
 
Downloaded From ManualsPrinter.com Manuals 

92  -  C110 User’s Guide
Important!
Do not touch the PC drum on the imaging cartridge.
Position the removed imaging cartridge horizontally as shows in 
the illustration at the right.
 
Be sure to keep the imaging cartridge horizontal and place it where 
it will not become dirty.
 
Do not leave the imaging cartridge removed for more than 15 
minutes, and do not place the removed imaging cartridge in a 
location where it would be exposed to direct light (such as 
sunlight).
Downloaded From...

93  -  C110 User’s Guide
3Push the fuser separator levers 
back as far as possible.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CAUTION
The area around the fuser 
unit is extremely hot.
 
Touching anything other 
than the indicated levers 
may result in burns. If you 
get burned, immediately 
cool the skin under cold 
water, and then seek 
professional medical 
attention.
 
 
 
 
M
Downloaded From ManualsPrinter.com Manuals 

94  -  C110 User’s Guide
4Remove any misfed media.
NoteRaise the fuser unit cover 
and remove the media.
M
M
Downloaded From ManualsPrinter.com Manuals 

95  -  C110 User’s Guide
Important!
Do not touch the paper exit 
sensor on the fuser unit. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Important!
Decreased print quality may 
result if the surface of the 
transfer roller is touched.
 
Be careful not to touch the 
surface of the transfer roller.
 
 
 
 
 
 
 
 
 
 
 
M
Downloaded From ManualsPrinter.com Manuals 

96  -  C110 User’s Guide
5Return the fuser separator 
levers to their original positions.
6Slowly insert the imaging 
cartridge vertically, and then 
push it slightly down toward you 
to finish reinstalling the imaging 
cartridge.
M
Downloaded From ManualsPrinter.com Manuals 

97  -  C110 User’s Guide
7Carefully close the top cover. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Downloaded From ManualsPrinter.com Manuals 

98  -  C110 User’s Guide
Solving Problems with Media Misfeeds
NoteFrequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media.
SymptomCauseSolution
Several sheets go 
through the printer 
together.The front edges of 
the media are not 
even.Remove the media and even up the 
front edges, then reload it.
The media is moist 
from humidity.Remove the moist media and replace it 
with new, dry media.
Media...

99  -  C110 User’s Guide
Solving Other Problems
SymptomCauseSolution
Printer 
power is not 
on.The power cord is not 
correctly plugged into the 
outlet.Turn off the printer, confirm that the 
power cord is correctly plugged into the 
outlet, and then turn on the printer.
Something is wrong with the 
outlet connected to the 
printer.Plug another electrical appliance into 
the outlet and see whether it operates 
properly.
The power switch is not 
correctly turned on (I 
position).Turn the power switch off...

100 - C110 User’s Guide
Not all pages 
print.The Cancel key was 
pressed.Make sure no one pressed the Cancel 
key while your job was printing.
The tray is empty.Check that the trays are loaded with 
media, in place, and secure.
A document is printed with an 
overlay file which has been 
created by an unsuitable 
printer driver.Print the overlay file using a suitable 
printer driver.
Printer 
resets or 
turns off 
frequently.The power cord is not 
correctly plugged into the 
outlet.Turn off the printer,...