OKI B4525 User Manual

Installation
11 • Do not allow water or other liquids to spill on or near the terminal. Fire or electrical shock can 
occur should water or liquid come into contact with the terminal.
• Should liquid or any piece of metal accidently get inside the printer, immediately turn it off, 
unplug the power cord, and contact your dealer. Failure to take this immediate action creates the 
danger of fire or electrical shock.
• Whenever the terminal emits unusually high amounts of heat, smoke, an unusual odor, or...

12 Installation
  
Unpacking the optional paper tray 
+Remove the plastic bags and check for the parts illustrated below.
   
1 Paper Tray
2 Mechanical 
unit paper 
tray
3Cardboard 
box
Installing the 
optional paper 
tray (refer to 
paragraph 
Installing the 
second paper 
tray 
(optional), 
page 20)
1
2
3
Downloaded From ManualsPrinter.com Manuals 

Installation
13
Unpacking the duplex unit (optional)
+ Remove the plastic bags and check for the parts illustrated below.
    
1 Duplex Unit
2 Cardboard Box
+Installing the Duplex 
unit (refer to 
paragraph 
Installing the 
Duplex unit 
(optional), 
page 22).
2 1
Downloaded From ManualsPrinter.com Manuals 

14 Installation
Description
   
1 Adjustable 
Paper Guide
2 Scroll Scanner 
(ADF)
3Console
4Printer
5 Second Paper 
Tray (Optional) 
[500 pages]
6 Printer Paper 
Feed Tray
7Manual Paper 
Feed Tray
8Printer Output 
Stacker
9USB Port
10 Chip Card 
Reader
11 Access handle, 
Flatbed Scanner
12 Original 
document 
output stacker
13 Document Feed 
Tray for 
scanning
1B Parallel PC port 
2B USB Port
3B LAN cable 
socket 
4B Telephone cable 
socket
5B Toner Cartridge
6B Image Drum 
Cartridge
7B Telephone Cord
8B...

Installation
15
Installing the removeable parts
 This section details the installation of the terminal’s removable parts.
Installing the scanner paper tray
+Secure the document feeder by fitting the two clips (B) in the notches (A) provided 
for this purpose.
AB
Downloaded From ManualsPrinter.com Manuals 

16 Installation
Installing the printer output stacker
+Insert the two clips (B) of the stacker into the notches (A) provided for this 
purpose.
Installing the printer paper tray
+Hold the tray in front of the printer (as shown in the drawing). Align the tabs 
in the tray with the notches in the printer. Slowly press the tray into the 
printer until it snaps into place. 
A
B
Downloaded From ManualsPrinter.com Manuals 

Installation
17
Loading paper
+Remove the cover from the printer paper tray.
+ Press the paper size guide inside the tray on the right, in order to push both paper 
size guides to the left or to the right.
+Put a stack of paper into the tray (do not put in more than 250 pages). In case of 
letterhead paper, be sure to place the paper printed side up.
+ Secure the stack of paper by pushing the paper size guides against the right and 
left edges of the stack.
Caution - Do not add paper to the tray while...

18 Installation
+Replace the printer paper tray cover.
Paper useable in the printer :
Printer paper tray 16 to 24 lb (60 to 90 g/m
2)
Manual feed 16 to 43 lb. (60 to 160 g/m2)
Downloaded From ManualsPrinter.com Manuals 

Installation
19
Adjusting the original document output tray
+Depending on the size of paper to scan, Letter or LGAL (LEGAL), adjust the supply 
stop.
Loading paper in manual mode
When printing on special paper, such as 16 to 43 lb. ( 60 to 160 g/m2)  maximum color 
paper or transparent file (laser printer compatible), you should load the paper manually, 
up to 10 sheets maximum. Insert your sheet of paper or film between the two feed 
guides 1 and 2 located on the paper tray cover until it stops in the...

20 Installation
Installing the second paper tray (optional)
1.  Remove the second paper 
cassette unit and tray 2 from 
their packaging, including the 
protective tape used to hold the 
various components in place.2. Position the printer above the additional 
paper tray unit. Align the coupling pins of 
the additional paper tray unit with the 
corresponding notches in the bottom of the 
printer.
3. Remove the paper tray cover. 4. Press the support plate located on the 
paper tray until it locks into...