OKI B4350nPS User Manual

							OPERATOR PANELS > 21
Preferences Tab 
Selecting this tab lets you choose the information displayed by the Status 
Monitor and how/when the Status Monitor appears.
The default Alert view setting ensures that the Status Monitor pops up to 
inform you of a condition that requires your attention, e.g. toner low.
MENU FUNCTIONS
The printer menu settings made from the Status Monitor can be seen 
collectively on a printed Menu Map. (For details of how to print such a 
map, see the next section.)
It should be noted that many of these settings can be, and often are, 
overridden by settings made in the printer drivers. However, several of the 
driver settings can be left at “Printer Setting,” which will then default to 
the settings entered in these printer menus.
The menu functions and their default values are summarized in the table 
in the section entitled “Menu Functions” in the following information 
about the B4350 printer. Note, however, that the RS232 Menu does not 
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 22
apply to the B4100 printer, and the Network Menu does not apply to the 
B4100 or B4250 printer.
CHANGING THE DISPLAY LANGUAGE
Carry out the following instructions to change the language that is 
displayed in the Status Monitor.
1. Start the Status Monitor.
2. Select the Printer Setup tab.
3. On the Maintenance 2 tab, select the required language in the 
[Language] dropdown menu.
4. Click [OK]. 
PRINTING MENU SETTINGS
The menu settings can be printed as a menu map as follows.
Using the control button
1. Press the control button to take the printer off-line.
2. Press and hold down the control button for at least two seconds, 
but less than five seconds.
3. The printer prints a list of the menu settings and a demo print 
page.
NOTE
Demo and menu pages can also be printed using the printer Status Monitor..
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 23
B4350, B4350n
OPERATOR PANEL
The B4350 and B4350n operator panel consists of a menu driven control 
panel, an LCD display and a LED indicator.
PANEL ELEMENTS
1. Ready indicator (green). ON - ready to receive data. FLASHING 
indicates processing data or error.
2. Liquid crystal display. (LCD) panel. Two rows of up to 8 
alphanumeric digits displaying print status, menu items in menu 
mode and error messages. 
3. Menu button. Press briefly to enter the MENU mode. Press briefly 
again to select the next menu. Press for more than 2 seconds to 
scroll through the different menus.
4. Item (+) button. Press briefly to scroll forward to the next menu 
item.
5. Value (+) button. Press briefly to scroll forward to the next value 
setting for each menu item.
6. Select button. Press briefly to select the menu, item or value 
indicated on the LCD panel.
7. Cancel button. Press to cancel a print job.
8. Value (–) button. Press briefly to scroll backward to the previous 
value setting for each menu item.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 24
9. Item (–) button. Press briefly to scroll backward to the previous 
menu item.
10. Online button. Press to switch between online and offline status. 
MENU FUNCTIONS
This section summarizes the menus accessed via the menu control panel 
and displayed in the LCD panel. The printer menu settings can be seen 
collectively on a printed Menu Map. (For details of how to print  a Menu 
Map, see the next section.)
It should be noted that many of these settings can be, and often are, 
overridden by settings made in the printer drivers. However, several of the 
driver settings can be left at “Printer Setting,” which will then default to 
the settings entered in these printer menus.
Factory default settings are shown in the following tables.
NOTE
When pressed in Menu mode, the Online button returns the printer to 
ONLINE status. When pressed with DATA PRESENT displayed, it forces 
the printer to print out the remaining data in the printer. Also when there is 
an error indicating wrong paper size, pressing the Online button forces the 
printer to print.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 25
Information Menu
This menu provides a quick method of listing various items stored within 
the printer.
Print menu
This menu provides adjustment of various print job related functions.
INFORMATION MENU
itemAction
PRINT MENU MAP Execute
PRINT FILE LISTExecute
PRINT PCL FONT Execute
PRINT PSE FONTExecute
PRINT IBM PPR FONT Execute
PRINT EPSON FX FONTExecute
DEMO1 Execute
PRINT MENU
itemDefaultRemarks
COPIES 1
MANUALOFF
PA P E R  I N T R AY 1
AUTOTRAYOFF
ONOFF: No optional tray installed
ON: Tray2 is installed
TRAY SEQ DOWN
SIZE CHKENABLE
DPI MODE 600
TNR SAVEDISABLE
ORIENT PORTRT
LINES/PG64LNS
EDT SIZE CASSETT
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 26
Media Menu
This menu provides adjustment to suit a wide range of print media.
System configuration menu
This menu adjusts general printer settings to suit the way you prefer to 
work.
MEDIA MENU
ItemDefaultRemarks
T1 SIZE LETTER
T1 TYPEPLAIN
T1 WEIGHT MEDIUM
T2 SIZELETTERWhen tray 2 is installed
T2 TYPE PLAIN When tray 2 is installed
T2 WEIGHTMEDIUMWhen tray 2 is installed
MN SIZE LETTER
MN TYPEPLAIN
MN WEIGHT MEDIUM
MEASUREINCH
X DIM 8.5 
Y DIM11.0 
SYSTEM CONFIGURATION MENU
ItemDefaultRemarks
PWR SAVE 15 MIN
EMULATEAUTO
PARA PROT ASCII When PSE is installed
USB PROTRAWWhen PSE is installed
NW PROT RAW When both NIC and PSE are 
installed
RS PROTASCIIWhen both RS232 and PSE are 
installed
CLR WRNG ON
AUTOCONTOFF
MAN TIME 60 SEC
WA I T  T I M E40 SEC
LOW TNR CONT
JAM RCVRON
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 27
PCL emulation
This menu controls the printer’s PCL emulation.
PPR Emulation
This menu controls the printer’s PPR emulation.
ERR REP OFF
LANGUAGEENGLISH
PCL MENU
ItemDefaultRemarks
FONT SRC RESDENT
FONT No.I000
FONT CPI 10.00
FONT HGT12.00Not displayed in default setup
SYMBOL PC-8
A4 WIDTH78 COL
BLNKSKIP OFF
CR FUNCCR
LF FUNC LF
PR MGNNORMAL
PEN ADJ ON
PPR MENU
ItemDefaultRemarks
PITCH 10 CPI
CONDENSE12 to 20
CHAR SET SET-2
SYMBOLIBM-437
LETTER O DISABLE
ZERO CHRNORMAL
LN PITCH 6 LPI
BLNKSKIPOFF
CR FUNC CR
LF FUNCLF
SYSTEM CONFIGURATION MENU
ItemDefaultRemarks
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 28
FX Emulation
This menu controls the printer’s FX emulation.
Parallel menu
This menu controls the operation of the printer’s parallel data interface.
LINELENG 80 COL
FORMLENGA4
TOF POS 0.0 INCH
L MRGN0.0 INCH
FIT2LTR DISABLE
TEXT HGTSAME
FX EMULATION
ItemDefaultRemarks
PITCH 10 CPI
CHAR SETSET-2
SYMBOL IBM-437
LETTER ODISABLE
ZERO CHR NORMAL
LN PITCH6 LPI
BLNKSKIP OFF
CR FUNCCR
LINELENG 80 COL
FORMLENGLETTER
TOF POS 0.0 INCH
L MRGN0.0 INCH
FIT2LTR DISABLE
TEXT HGTSAME
PARALLEL MENU
ItemDefaultRemarks
PARALLEL ENABLE
BI-DIRCTENABLE
ECP ENABLE
PPR MENU
ItemDefaultRemarks
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 29
RS232C menu
This menu controls the operation of the printer’s RS232C data interface.
ACKWIDTHNARROW
ACK/BUSY IN
I-PRIMEDISABLE
OFF REC DISABLE Only when PSE is installed
RS232C MENU
ItemDefaultRemarks
RS232C ENABLE Only when RS232C is installed
FLOW CTLDTR HIOnly when RS232C is installed
BAUDRATE 9600 Only when RS232C is installed
DATABITS8 BITSOnly when RS232C is installed
PARITY NONE Only when RS232C is installed
MIN. BUSY200mSECOnly when RS232C is installed
OFF REC DISABLE Only when both RS232C and 
PSE are installed
PARALLEL MENU
ItemDefaultRemarks
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATOR PANELS > 30
USB menu
This menu controls the operation of the printer’s USB data interface.
Network menu
This menu controls the operation of the printer’s 10Base-T/100Base-TX 
network interface.
USB MENU
ItemDefaultRemarks
USB ENABLE
SOFT RSTDISABLE
SPEED 480Mbps
OFF RECDISABLEOnly when PSE is installed
NETWORK MENU
ItemDefaultRemarks
TCP/IP ENABLE Only when NIC is installed
NETBEUIENABLEOnly when NIC is installed
NETWARE ENABLE Only when NIC is installed
ETHERTALKENABLEOnly when NIC is installed
FRAME TYPE AUTO Only when NIC is installed
IP ADDRESS SETAUTOOnly when NIC is installed
IP ADDRESS Only when NIC is installed
SUBNET MASKOnly when NIC is installed
GATEWAY ADDRESS Only when NIC is installed
INITIALIZE NIC?Only when NIC is installed
WEB/IPP ENABLE Only when NIC is installed
TELNETENABLEOnly when NIC is installed
FTP ENABLE Only when NIC is installed
SNMPENABLEOnly when NIC is installed
LAN NORMAL Only when NIC is installed
HUB LINK SETTINGAUTO 
NEGOTIATEOnly when NIC is installed
Downloaded From ManualsPrinter.com Manuals