Nvidia Quadro Plex S4 Visualization System Guide
Have a look at the manual Nvidia Quadro Plex S4 Visualization System Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 9 Nvidia manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
47 Registration, Support and Warranty Registering Your Quadro Plex System After you register your Quadro Plex S4, you have priority access to NVIDIA Customer Care by using your assigned user ID and password to log on. You can also elect to receive automatic notifi cation of special promotions and software updates through e-mail to ensure that your Quadro Plex system continues to operate optimally.
Quadro Plex S4 Visualization System Installation Guide 48 Warranty and Support NVIDIA offers a thirty-six (36) month warranty. „ NVIDIA warranty and support (Customer Care) information is „ available at: www.nvidia.com/support www.nvidia.com/warranty You may also access these sites from NVIDIA’s main web site at: „ www.nvidia.com Upon registration, you will receive an acknowledgement „ e-mail that includes sign-on information for NVIDIA Customer Care and other information. The NVIDIA support site allows you to search „ our extensive knowledge base.
49 Compliance and Certifi cations Bureau of Standards, Metrology, and Inspection ( BSMI) „ Austral ian Communicat ions Authority (C-Tick) „ Conformité Européenne (CE) „ Federal Communications Commission (FCC) - Class B „ Industry Cananda Interference-Causing Equipment Standard (ICES) „ Ministry of Information and Communication ( MIC) „ Underwriters Laboratories (UL, CUL) „ Voluntary Control Council for Interference ( VCCI) „
Quadro Plex S4 Visualization System Installation Guide 50 Regulatory Compliance Statement The following Regulatory Compliance statements apply to the products documented by this installation guide. U.S. Federal Communications Commission Compliance Title 47 of Code of Federal Regulation (CFR) part 15 - Radio „ frequency devices; Subpart B - Unintentional Radiator CAUTION: Changes or modifi cations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
51 Canada Compliance Industry Canada „ ICES-003 - Digital Apparatus: Spectrum „ Management and Telecommunications Policy; Interference-Causing Equipment Standard This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Australia and New Zealand Compliance C-Tick Mark - The Australian Communications Authority (ACA) and „ the Radio Spectrum Management Group (RSM ) of New Zealand AS/NZS CISPR 22:2004 standard – Information „ technology equipment-Radio disturbance characteristics- limit and methods of measurement ATTENTION: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Compliance and Certifi cations
Quadro Plex S4 Visualization System Installation Guide 52 Japan Compliance VCCI Mark - Voluntary Control Council for Interference „ by Information Technology Equipment • V-1/93.11: Agreement of Voluntary Control Council for „ Interference by Information Technology Equipment • V-2/97.04: Rules for Voluntary Control Measures „ • V-3/97.04: Normative Annex 1 Technical Requirements „ • V-4/97: Normative Annex 1-1 Supplementary Test „ Conditions for Equipment under Test This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions. Korea Compliance MIC Mark - Ministry of Information and Communication „ • K N 22 (CISPR 22): Information technology equipment-Radio „ disturbance characteristics - limit and methods of measurement • K N 24 (CISPR 24): Information technology equipment - „ immunity characteristics-limit and methods of measurement “Class A” Equipment (Business purpose info/telecommunications equipment) Warning: This is a Class A device and is registered for EMC requirements for industrial use. The seller or buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type.
53 Taiwan Compliance BSMI Mark - Bureau of Standards, Metrology and Inspection „ CNS 13438 (CISPR 22): Information technology equipment-Radio „ disturbance characteristics-limit and methods of measurement CNS 14336 ( IEC 60950-1): Information Technology „ Equipment – Safety - Part 1: General Requirement This is a Class A Information Product, when used in residential environment, it may cause radio frequency interference, under such circumstances, the user may be requested to take appropriate countermeasures. Compliance and Certifi cations
Quadro Plex S4 Visualization System Installation Guide 54 European Union Compliance CE Mark - Eurpean Conformity (Conformite Europeene) „ Product comply with both the EMC Directive (80/336/ „ EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies comformity „ to the following European Norms (The equivalent international standards are in parenthesis) EN-56022 (CISPR 22): Information technology equipment-Radio „ disturbance charateristis - limit and methods of measurement EN 55024 (IEC 61000-4-2, 3, 4, 5, 6, 8, 11): Information „ technology equipment - immunity characteristics- limit and methods of measurement EN 61000-3-2 ( IEC 61000-3-2): Electromagnetic compatibility „ (EMC)-Part 3-2: Limits-Limits for harmonic current emissions (equipment input current ≤16 A per phase) EN 61000-3-3 ( IEC 61000-3-3): Electromagnetic compatibility „ (EMC)-Part 3-3: Limits-Limitation of voltage changes, voltage fl uctuations and fl icker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection) EN 60950-1 ( IEC 60950-1): Information Technology „ Equipment-Safety-Part 1: General Requirement Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to make adequate measures.
55 Important Safety Information NVIDIA products are designed to operate safely when installed and used according to the product instructions and general safety practices. The guidelines included in this document explain the potential risks associated with computer operation and provide important safety practices designed to minimize these risks. By carefully following the information contained in this document and the specifi c instructions provided with your product, you can protect yourself from hazards and create a safer computer work environment. The product is designed and tested to meet IEC-60950, the Standard for the Safety of Information Technology Equipment. This also covers the national implementation of IEC-60950 based safety standards around the world e.g. UL-60950. These standards reduce the risk of injury from the following hazards: Electric shock: „Hazardous voltage levels contained in parts of the product. Fire: „Overload, temperature, material fl ammability. Mechanical: „ Sharp edges, moving parts, instability. Energy: „Circuits with high energy levels (240 volt- amperes) or potential as burn hazards. Heat: „Accessible parts of the product at high temperatures. Chemical: „Chemical fumes and vapors. Radiation: „ Noise, ionizing, laser, ultrasonic waves Nuetral Fusing: „ CAUTION - DOUBLE POLE/NEUTR AL FUSING To reduce the risk of bodily injury, electric shock, fi re and damage to the equipment, observe all precautions included in this guide.
Quadro Plex S4 Visualization System Installation Guide 56 Symbols on Equipment This symbol in conjunction with any of the following symbols indicates the presence of a potential hazard. The potential for injury exists if warnings are not observed. Consult your documentation for specifi c details. This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualifi ed personnel. WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure. Refer all maintenance, upgrades and servicing to qualifi ed personnel. This symbol indicates the presence of electric shock hazards. The area contains no user or fi eld service able parts. Do not open for any reason. WARNING: To reduce risk of injury from electric shock hazards, do not open this enclosure. This symbol indicates the presence of a hot surface or hot component. If this surface is contacted the potential for injury exists. WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before touching. This symbol indicates that the component exceeds the recommended weight for one individual to handle safety. WARNING: To reduce the risk of personal injury or damage to the equipment, observe local occupational health and safety require and guidelines for manual material handling. This symbol indicates the presence of a sharp edge or object that can cause cuts or other bodily injury. WARNING: To prevent cuts or other bodily injury, do not contact sharp edge or object. This symbol indicates the presence of mechanical parts that can result in pinching, crushing or other bodily injury. WARNING: To avoid risk of bodily injury, keep away from moving parts. This symbol indicates the presence of a potential tip over hazard that can result in bodily injury. WARNING: To avoid risk of bodily injury, follow all instructions for maintaining stability of the equipment during transport, installation.