Home > North American Arms > Firearms > North American Arms Mini-Master Instructions Manual

North American Arms Mini-Master Instructions Manual

Add to Favourites
    Download as PDF

    View the North American Arms Mini-Master Instructions Manual for free. All the North American Arms manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 North American Arms, Inc. Owner & Instruction Manual .22 Magnum, .22 Long Rifle, .22 Short Mini-Master & Black Widow Congratulations! You are the owner of a North American Arms mini-revolver. This handgun has been manufactured from the highest quality, rust resistant stainless steel, in the United States. NAA buys American. Before leaving our factory, your handgun was thoroughly inspected and test-fired to ensure years of reliable, trouble-free service. Before you use this handgun,...
    Page 2 STATEMENT OF LIABILITY Warning! All NAA mini-revolvers are classified as dangerous weapons; therefore NAA surrenders this handgun with the understanding that no liability wh atsoever is assumed by NAA for its resale, safe handling nor compliance with existing state or Federal laws and regulations by future recipients. Further, NAA accepts no liability for personal injury, or loss of property or life resulting from th e use of this handgun under any circumstances, including intentio nal...
    Page 3 1. Place the hammer in the half-cock position, then pull the hammer back slowly until you can turn the cylinder freely. Make sure that you have full control of the hammer and that it does not slip from your grasp, allowing the hammer to fall forward. 2. Rotate the cylinder to the between chamber position so that the hammer is aligned with the safety slot. 3. While holding the hammer securely, press the trigger and ease the hammer forward into the safety slot. Do not depress the tr igger until...
    Page 4 4. Reverse the above procedure to insert the cylinder, making sure the cylinder pin seats firmly against the frame for proper functioning. FIRING To fire the revolver, draw the hammer back as far as possible, making sure that it locks in the fully cocked position before removing your thumb from the hammer. Actual firing is done by pulling the trigger. Note that, due to the small physical size of the mini-revolver, you must ensure that neither the thumb nor a ny fingers impede the rotating...
    Start reading North American Arms Mini-Master Instructions Manual

    Related Manuals for North American Arms Mini-Master Instructions Manual

    All North American Arms manuals