Nortel Enterprise Edge M7310 Instructions Manual
Here you can view all the pages of manual Nortel Enterprise Edge M7310 Instructions Manual. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
© 1999 Nortel Networks P0908513 Issue 01 Enterprise Edge M7310 User Card
Page 2
Page 3
Page 1 Enterprise Edge M7310 User Card Your Enterprise Edge M7310 Telephone Using Button InquiryCheck what is programmed on your memory buttons. 1. Release all calls or lines with dial tone. 2. Press Ä¥â. 3. Press the button(s) that you want to check and read the display. 4. Press Ä when finished. Adjusting display contrast1. Press Ä¥à. 2. Press UP or DOWN for the level you want. 3. Press OK when finished. Selecting a ring type and volume level1. Press Ä¥ß. 2. Press Ú, Û, Ü, Ý, orÊNEXT to hear...
Page 4
Page 2 Enterprise Edge M7310 User Card Making and answering calls Answering calls Answering calls using the handset When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Lift the handset. OR Press the button beside the flashing ¼ before lifting the handset. Answering calls using Handsfree When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Press ©. Making calls Depending upon the dialing mode programmed on your telephone, you may have to lift the...
Page 5
Page 3 Enterprise Edge M7310 User Card Remember: Press Ä¥â to check a memory or line button. Notice These telephones now conform to the latest standards in relation to the positioning of Q and Z on the number keys. The Q appears on key number 7 and the Z appears on key number 9. Programming memory buttonsExternal Autodial 1. If you are on a call or an open line with dial tone, press ú or ¨ 2. Press Ä¥Ú. 3. Press a memory button. 4. Dial the external number. 5. Press OK to store the number. 6....
Page 6
Page 4 Enterprise Edge M7310 User Card Setting up the telephone Connecting the cordsAT T E N T I O N Before attempting to carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull the plug from the socket. Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown. If you are using a headset, route the cord along the channel in the base...
Page 7
Page 5 Enterprise Edge M7310 User Card P0908513 Issue 01 Setting up the telephone Mounting the telephone on the wall