Nortel Enterprise Edge M7100N Instructions Manual
Here you can view all the pages of manual Nortel Enterprise Edge M7100N Instructions Manual. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
© 2000 Nortel Networks P0908517 Issue 02 Enterprise Edge M7100N User Card
Page 2
Page 3
Page 1 Enterprise Edge M7100N User Card Your Enterprise Edge M7100N telephone Using Button InquiryCheck what is programmed on your memory button. 1. Release all calls or lines with dial tone. 2. Press Ä¥â. 3. Press the button that you want to check. 4. Read the display. 5. Press Ä when finished. Adjusting the display contrast1. Press Ä¥à. 2. Press Ú to á for the level you want; the higher the number the higher the level. Selecting a ring type and volume level1. Press Ä¥ß. 2. Press Ú, Û, Ü or...
Page 4
Page 2 Enterprise Edge M7100N User Card Making and answering calls Answering calls 1. When your telephone rings, lift your handset. You are immediately connected to the call. Making external callsDepending upon the dialling mode programmed for your telephone, you may be able to dial your call before lifting your handset. 1. Pick up the handset. 2. Dial â (your system’s exchange line access code or a line pool access code). 3. Dial the external telephone number. Making internal calls 1. Pick up the...
Page 5
Page 3 Enterprise Edge M7100N User Card Programming the memory button Remember: Press Ä¥â to check a memory or line button. Programming the memory buttonExternal Autodial 1. If you are on a call or a line with dial tone, press ú or¨. 2. Press Ä¥Ú. 3. Dial the external number. 4. Press ú to store the number. 5. Label your new button. Internal Autodial 1. If you are on a call or a line with dial tone, press ú or¨. 2. Press Ä¥Û. 3. Dial the extension number. 4. Label your new button. Features 1....
Page 6
Page 4 Enterprise Edge M7100N User Card Setting up the telephone Connecting the cordsATTENTION Before attempting to carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull the plug from the socket. Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown. Route the line cord through the stand and connect the cord to the telephone...
Page 7
Page 5 Enterprise Edge M7100N User Card Setting up the telephone Mounting the telephone on the wall 12 cm Page 5 Enterprise Edge M7100N User Card P0908517 Issue 02