Nokia N971 Owners Manual

2.To switch between the two calls, select  Options >
Swap .
3. To connect a call on hold with an active call, and to
disconnect yourself fr om the calls, select Options >
Transfer .
4. To end the active call, press the end key.
5. To end both calls, select  Options > End all calls .Voice dialingYour device automatically creates a voice tag for the
contacts. To listen to the  synthesized voice tag, select
a contact and  Options > Voice tag details . Scroll to
a contact detail, and select  Options > Play...

   You have denied video sending from your device.
To send a still imag e instead, select Menu >
Settings  and Calling  > Call > Image in video call .
Even if you denied video sending during a video call,
the call is still charged as a  video call. Check the pricing
with your service provider.
1. In the home screen, select 
 to open the dialer,
and enter the phone number.
2. Select  Options  > Call > Video call .
The secondary camera on the front is used by
default for video calls. St arting a video call...

If you do not activate the video call, you only hear the
voice of the caller. A gray screen replaces the video
image. To replace the grey screen with a still image
captured by the camera in your device, select Menu >
Settings  and Calling  > Call  > Image in video call .Internet callsAbout internet callsWith the internet call network service, you can make
and receive calls over the internet. Internet call services
may support calls betwee n computers, between
mobile phones, and betwee n a VoIP device and...

To set an internet call service as the default service,
select Default service. When you press the call key to
c a l l  a  n u m b e r ,  y o u r  d e v i c e  m a k e s  a n  i n t e r n e t  c a l l  u s i n g
the default service if the service is connected. You can
set only one service at a ti me as the default service.
To edit the service destination, select  Service
connectivity .Video sharingUse video sharing (network se rvice) to send live video
or a video clip from your mobile device to another...

your device. Your service provider may send you the
settings or give you a list of the needed parameters.
To add a SIP address to a contact:
1.Select  Menu >  Contacts.
2. Open the contact or create a new contact.
3. Select  Options  > Edit.
4. Select  Options  > Add detail  > Share video .
5. Enter the SIP address in the format
username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the contact,
you can use the phone number of the recipient,...

3.To end the sharing session, select  Stop. To end the
voice call, press the end key. When you end the call,
video sharing also ends.
To save the live video you shared, select  Yes when
prompted. The device notifies you of the location of the
saved video.
If you access other applicat ions while you are sharing
a video clip, the sharing is paused. To return to the
video sharing view and to continue sharing, in the
home screen, select  Options > Continue .Accept an invitationWhen someone sends you a video...

●Clear list  — Clear the selected recent calls list.
● Delete   — Clear a highlighted event in the selected
list.
● Settings   — Select  Log duration  and the length of
time that the communicat ion information is saved
in the log. If you select  No log, no information is
saved in the log.Call durationSelect  Menu > Applications >  Log.
To view the approximate duration of your last call,
dialled and received  calls, select Call duration .
Note:  The actual invoice for calls and services
from your service...

Contacts (phonebook)To open Contacts, select Menu > Contacts.
You can save and update contact information, such as
phone numbers, home addresse s, or e-mail addresses
of your contacts. You can add a personal ringing tone
or a thumbnail image to a co ntact. You can also create
contact groups, which allow  you to send text messages
or e-mail to many recipients at the same time.Save and edit names and
numbers1. To add a new contact to the contacts list, tap 
.
2. Tap a field to enter the information in the...

Note:  Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely up on voice dialing in all circumstances.
Default numbers and
addressesYou can assign default numbers or addresses to a
contact. If a contact has se veral numbers or addresses,
you can easily call or send a message to a certain
number or address. The default number is also used in
voice dialling.
1. In the contacts list, select a contact.
2. Select  Options  > Defaults .
3. Select a...

Ringing tones, images, and
call text for contactsYou can define a ringing tone for a contact or group,
and an image and a call text for a contact. When the
contact calls you, the device plays the selected ringing
tone and shows the call text or image (if the caller’s
phone number is sent with the call and your device
recognizes it).
To define a ringing tone  for a contact or a contact
group, select the contact or contact group and
Options  > Edit  > Ringing tone , and a ringing tone.
To add more fields...