Nokia E 7 E Manual

							2 Define the length of time after which the keys and screen are locked automatically.
Flashlight
The camera flash can be used as a flashlight. To switch the flashlight on or off, slide and
hold the key lock switch for two seconds.
The flashlight can only be used when you are on the home screen. You can switch the
flashlight on also when you are on the home screen and the keys and screen or the
device is locked.
Do not shine the flashlight in anyones eyes.
Insert or remove the SIM card
Do not attach any stickers to your SIM card.
Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, a
micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure)
in this device. A micro SIM card is smaller than the standard SIM card. This device does
not support the use of micro-SIM cards and use of incompatible SIM cards may damage
the card or the device, and may corrupt data stored on the card.
Insert the SIM card
1 Switch the device off, and remove the SIM card holder from the device.
2 Turn the SIM card holder over.
Get started 11 
						

							3 Make sure the contact area is facing up, and insert the SIM card into the SIM card
holder.
4 Turn the SIM card holder over, and insert it back into the device.
Remove the SIM card
1 Switch the device off.
2 Remove the SIM card holder from the device.
3 Remove the SIM card.
4 Turn the SIM card holder over.
5 Insert the SIM card holder back into the device.
Charge your deviceAbout the battery
Your device has an internal, nonremovable, rechargeable battery. Use only Nokia
approved chargers designated for this device. You can also use a compatible USB data
cable to charge your device.
Do not attempt to remove the battery from the device. Take the device to the nearest
authorised service facility for replacement of the battery.
Authorised retail points may also offer a battery replacement service. 12 Get started 
						

							Important: Only qualified personnel or an authorised service facility should
replace the battery. Unauthorised battery replacement may invalidate your warranty.
When your device is low on power, power save mode is activated. You may not be able
to modify the settings of certain applications. To deactivate power save mode, press
the power key 
, and select Deactivate power saving.
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge it
before you can switch on your device for the first time.
If the device indicates a low charge, do the following:
1
2
You do not need to charge the battery for a specific length of time, and you can use the
device while it is charging.Get started 13 
						

							If the battery is completely discharged, it may take several minutes before the charging
indicator appears on the display or before any calls can be made.
If the battery has not been used for a long time, to begin charging, you may need to
connect the charger, then disconnect and reconnect it.
Charge the battery over USB
Battery low, but you dont have a charger with you? You can use a compatible USB cable
to connect to a compatible device, such as a computer.
To avoid breaking the charger connector, be careful when connecting or disconnecting
the charger cable.
If connected to a computer, you can synchronise your device while charging.
Charging over USB can take longer to start, and may not work if you connect through a
non-powered USB hub. Your device charges more quickly when connected to a wall
outlet.
When the battery is charging, the charging indicator light next to the USB connector is
lit. When the battery charge is low, the charging indicator light flashes. It may take a
while for charging to start.
Antenna locations
Avoid touching the antenna area unnecessarily while the antenna is transmitting or
receiving. Contact with antennas affects the communication quality and may cause a
higher power level during operation and may reduce the battery life. 14 Get started 
						

							The antenna area is marked in grey.
Headset
You can connect a compatible headset or compatible headphones to your device.
Switch the device on or off
Switch on
Press and hold the power key 
 until the device vibrates.
Switch off
Press and hold the power key 
.Get started 15 
						

							Use your device for the first time
Your device guides you through the initial setup when you insert your SIM card and
switch your device on for the first time. To use all of Nokias Ovi services, create a Nokia
account. You can also copy your contacts and other content from your previous device,
and subscribe to receive helpful tips and tricks.
To create a Nokia account, you need an internet connection. For information about data
transmission charges, contact your service provider. If you cant connect to the internet,
you can create an account later.
Tip: To create and manage your Nokia account on the internet, go to www.ovi.com.
If you already have a Nokia account, sign in.
Tip: Forgotten your password? You can request it to be sent to you in a mail or text
message.
Use the Phone switch application to copy your content, such as:
•Contacts
•Messages
•Pictures and videos
•Personal settings
When you set up your mail account, you can set your inbox to be displayed on your
home screen, so you can easily check your mail.
If you need to make an emergency call during the setup phase, press the menu key.
Nokia account
When you switch on your device for the first time, your device guides you through
creating a Nokia account.
With your Nokia account, you can, for example: 16 Get started 
						

							•Access all of Nokias Ovi services with a single user name and password, both on
your device and a compatible computer
•Download content from Ovi services
•Save details about your device model and contact information. You can also add
your payment card details.
•Save your important walking and driving routes to Ovi Maps
To learn more about Nokia account and Ovi services, go to www.ovi.com.
To create a Nokia account later, use your device to access an Ovi service, and you are
prompted to create an account.
Device set-up
To define some basic settings for your device, select the Phone setup shortcut 
 that
is on one of your home screens. To switch between home screens, swipe left or right.
You can do the following:
•
 Copy contacts, pictures, and other content from your previous Nokia device
•
 Personalise your device, by changing the ringtone and visual theme
•
 Set up mail
•
 Update your device software
•
 Modify slide handling settings
To define the settings later, you can also select Menu >  Applications >  Tools >  Phone
setup.
The available options may vary.
Copy contacts or pictures from your old device
Want to copy important information from your previous compatible Nokia device and
start using your new device quickly? Use the Phone switch application to copy, for
example, contacts, calendar entries, and pictures to your new device, free of charge.
Your previous Nokia device needs to support Bluetooth.
Select Menu > Applications > Tools > Phone setup and Data transfer. Get started 17 
						

							If your previous Nokia device does not have the Phone switch application, your new
device sends it in a message using Bluetooth. To install the application, open the
message in your previous device, and follow the instructions.
1 Select the device you want to connect to, and pair the devices. Bluetooth needs to
be activated.
2 If the other device requires a passcode, enter the passcode. The passcode, which
you can define yourself, must be entered in both devices. The passcode in some
devices is fixed. For details, see the user guide of the device.
The passcode is valid only for the current connection.
3 Select the content and OK.
Access codes
PIN or PIN2 code
(4-8 digits)These protect your SIM card against unauthorised use or are
required to access some features.
You can set your device to ask for the PIN code when you switch
it on.
If not supplied with your SIM card or you forget the codes,
contact your service provider.
If you enter the code incorrectly three times in a row, you need
to unblock the code with the PUK or PUK2 code.
PUK or PUK2 code
(8 digits)These are required to unblock a PIN or PIN2 code.
If not supplied with your SIM card, contact your service provider.
18 Get started 
						

							IMEI number
(15 digits)This is used to identify valid devices in the network. The number
can also be used to block, for example, stolen devices.
To view your IMEI number, dial *#06#.
Lock code (security
code)
(min. 4 digits or
characters)This helps you protect your device against unauthorised use.
You can set your device to ask for the lock code that you define.
Keep the code secret and in a safe place, separate from your
device.
If you forget the code and your device is locked, your device will
require service. Additional charges may apply, and all the
personal data in your device may be deleted.
For more information, contact a Nokia Care Point or your device
dealer.
Use the in-device user guide
 Select Menu > Applications > User guide.
Open the user guide from an application
Select Options > User guide. This is not available for every application.
Search the user guide
When the user guide is open, select Options > Search, and enter a letter or a word in
the search field.
Switch between the user guide and an application
Press and hold the menu key, swipe left or right, and select the desired application.
 indicates a link to a web page. Links to related topics may be at the end of
instructions.
Install Nokia Ovi Suite on your PC
With the Nokia Ovi Suite PC application, you can manage content on your device, and
keep it in sync with your computer. You can also update your device with the latest
software, and download maps.
Download the latest version of Nokia Ovi Suite from www.ovi.com/suite to your
computer.Install Nokia Ovi Suite on your PC 19 
						

							If your computer cant connect to the internet, to install Nokia Ovi Suite from your device
memory:
1 Use a compatible USB data cable to connect your device to your computer.
If you are using Windows XP or Windows Vista on your computer, set the USB mode
of your device to Mass storage. To set the USB mode on your device, select the
notification area in the top right corner, and select 
 > Mass storage.
Your device mass memory appears as a removable disk on your PC.
2 On your computer, select Install Nokia Ovi Suite.
If the installation window does not open automatically, open the installation file
manually. Select Open folder to view files, and double-click
Install_Nokia_Ovi_Suite.exe.
3 Follow the displayed instructions.
4 When the installation is complete, if you are using Windows XP or Windows Vista
on your computer, check that the USB mode of your device is set to Nokia Ovi
Suite.
To learn more about Nokia Ovi Suite, go to www.ovi.com/suite. 20 Install Nokia Ovi Suite on your PC