Nokia 6700c1 Manual

Antenna
Your device may have internal and external antennas. Avoid touching the antenna area
unnecessarily while the antenna is transmit ting or receiving. Contact with antennas
affects the communication quality and may ca use a higher power level during operation
and may reduce the battery life.
The figure shows the antenna area marked in grey.
Strap
1 Remove the back cover.
2 Attach a strap, and tighten it.
3 Replace the back cover.
Get started 11 

Keys and parts
1Earpiece
2 Display
3 Left and right selection keys
4 Call key
5 End/Power key
6 Navi™ key; hereafter referred to as scroll key
7 Keypad
12 Get started 

8Volume keys
9 Camera flash
10 Camera lens
11 Capture key
12 Loudspeaker
13 Charger connector
14 Strap eyelet
15 Microphone
16 USB connector
Switch the phone on and off
To switch the phone on or off,  press and hold the power key.
If the phone prompts for a PIN code,  enter the code (displayed as ****).
If the phone prompts you for the time and date, enter the local time, select the time
zone of your location in terms of the ti me difference with respect to Greenwich Mean
Time (GMT), and enter the date....

Display
1Signal strength of  the cellular network 2Battery charge status
3 Indicators
4 Clock
5 Name of the network or the operator logo
6 Date
7 Display
8 Function of the left selection key
9 Function of the scroll key
10 Function of the right selection key
You can change the function of th e left and right selection key. 
See  Left and rightselection keys , p. 32.
Home screen
The home screen mode displays a list of  selected phone features and information that
you can directly access.
Select  Menu >...

Shortcuts
When your device is in the standby or home screen mode, you can use the following
shortcuts.
List missed, received, and dialled calls
Press the call key. To make a call, scroll to the number or name, and press the call key.
Start the web browser
Press and hold 0.
Call the voice mailbox
Press and hold  1.
Use other keys as shortcuts
See Dialling shortcuts, p. 17.
Indicators
You have unread messages.You have unsent, cancelled, or failed messages.The keypad is locked.The phone does not ring for in...

Warning:
With the Flight profile you cannot make or receive any calls, including emergency calls,
or use other features that require network  coverage. To make calls, you must first
activate the phone function by changing prof iles. If the device has been locked, enter
the lock code.
If you need to make an emergency call while th e device is locked and in the Flight profile,
you may be also able to enter an official  emergency number programmed in your device
in the lock code field and select Call. The...

Functions without a SIM card 
Some functions of your phone may be used without inserting a SIM card, such as
Organiser functions and games. Some func tions appear dimmed in the menus and
cannot be used.
Calls
Make a call
You can make a call  in several ways:
• Enter the phone number, including th e area code, and press the call key.
For international calls, press  * twice for the international  prefix (the + character
replaces the international access code), enter the co untry code, the area code
without...

1 In the home screen mode, press and hold the right selection key.A short tonesounds, and  Speak after the tone  is displayed.
2 Say the name of the contact you want to di al. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of the first match
on the list. If it is not the corre ct command, scroll to another entry.
Options during a call
Many of the options that you can use during a call are network services. For availability,
contact your service...

The character cases are indicated by , , and .
To change the character case, press  #. To change from the letter to number mode,
indicated by 
, press and hold  #, and select  Number mode . To change from the
number to the letter mode, press and hold  #.
To set the writing language, select  Options > Writing language .
Traditional text input
Press a number key, 2-9, repeatedly until  the desired character appears. The available
characters depend on the  selected writing language.
If the next letter you...

Create a text or multimedia message
1 Select Menu > Messaging  > Create message  > Message .
2 To add recipients, scroll to the  To: field, and enter the recipient’s number or e-mail
address, or select Add  to select recipients from the available options. Select
Options  to add recipients and subjec ts and to set sending options.
3 Scroll to the  Text: field, and enter the message text.
4 To attach content to the message, scroll to the attachment bar at the bottom of the display, and select the desired...