Nokia 6200 User Guide

[ 122 ]
Add a voice tag for the command
1Press 
Menu 
11 - 3 (
Extras > Voice commands).
2Scroll to the phone function you wish to tag, then press 
Select.
3Scroll to an option associated with that function, then press 
Select.
4Press 
Options, then select 
Add command. 
5Press 
Start, then speak the voice tag clearly into the microphone.
Note: Do 
NOT press 
Quit unless you want to cancel the recording.
The phone replays and then saves the recorded tag. The   icon appears 
next to commands which have...

[ 123 ]Menu functions
Work with an existing voice command
After you have associated a voice tag to a command, you can choose one 
of the following options:
 Select 
Playback to listen to the voice command tag.
 Select 
Change to change the voice command.
 Select 
Delete to erase the voice command tag.
Audible alerts
Audible alerts use a series of beeps to inform you of the current signal 
strength or battery level of your phone.
Note: In order to obtain audible alerts, the alerts must first be set 
up...

[ 124 ]
Connectivity (Menu 12)
You can make a serial connection between your 
phone and a PC using the DKU-5 data cable, which 
is available for purchase as an enhancement. Once 
you establish this connection, you can access phone 
information from your PC, or use your phone as a 
wireless modem. It may also be possible to make this same serial connection 
between your phone and an IR-equipped laptop or IR-equipped desktop 
PC using the infrared port of your phone.
Note: Your phone must be switched on to...

[ 125 ]Menu functions
 Activate IR in your phone by pressing 
Menu 
12-1 (
Connectivity > 
Infrared) at the Start screen. 
 The user of the other device should activate IR as well.
If data transfer is not started within two minutes after the activation of 
the IR port, the connection is cancelled and has to be started again.
IR CONNECTION INDICATOR
 When   is shown continuously, the IR connection is activated and 
your phone is ready to send or receive data through its IR port.
 When   blinks, your...

[ 126 ] include the xHTML browser, Java applications, MMS, and dial-up 
connections for making digital data calls.
Enhanced general packet radio service (EGPRS), also known as enhanced 
data rates for global revolution (EDGE), may also be available. EGPRS/
EDGE technology works just like GPRS, but the connection is roughly 2-3 
times faster.
Note: In order to use (E)GPRS for dial-up connections, you must 
first subscribe to the (E)GPRS network service. Contact your 
service provider for details on...

[ 127 ]Menu functions
Set up an automatic connection
Some service providers may have customized the options on the services 
menu. Contact your service provider for more information if the options 
shown here are not available.
Important: (E)GPRS may not be available in all wireless networks. 
The establishment and continuation of a (E)GPRS and Internet 
connection depends on network availability, service provider 
support, and signal strength.
1At the Start screen, press 
Menu 12-2-1 (
Connectivity >...

[ 128 ]
Make a call while online
When you are browsing an xHTML page and want to make a call, you can 
select 
Use 
number. Your phone searches the information on the xHTML 
page for a string of numbers. You then choose from the number or 
numbers displayed to place the call.
An alternate way is to press 
i to disconnect from the Internet, then 
place your call by searching the contacts list for a name and number or 
by keying in the phone number. 
Make an emergency call while online
If you are using...

[ 129 ]Menu functions
SAVE SETTINGS WHEN RECEIVED AS A TEXT MESSAGE
When you receive the synchronization settings as a text message, 
Synchronization settings received is displayed.
Press 
Options and select:

Details to view the received settings first.

Save to save the synchronization settings.

Discard to discard the synchronization settings.
SAVE SETTINGS MANUALLY
You need to activate the set where you want to save the synchronization 
settings. A set is a collection of settings required to make...

[ 130 ]
Synchronize from your phone
If you have saved data in the remote Internet server, you can synchronize 
your phone by starting the synchronization from your phone. Once you 
have customized and selected the appropriate synchronization settings, 
you are ready to synchronize data. (See “Save synchronization settings” 
on page 128 for more information.)
1At the Start screen, press 
Menu 13-5 (
Services > Settings) and 
press 
Select.
2Scroll to 
Active service settings and press 
Select.
3Select the...

[ 131 ]Menu functions
 To reject the incoming call, press 
i (synchronization continues)
 To answer the incoming call, press 
h (synchronization is interrupted 
and a 
Synchronization suspended message appears)
Note: Once the incoming call is ended, a 
Start synchronization 
again? message appears. Selecting 
Yes starts synchronization over 
again, from the beginning.
Synchronize from your PC
You can synchronize the data in the contact list and calendar in your phone 
to correspond with the data of...