Nokia 6120c1 User Manual

11
You can extend the available memory with a microSD memory card. You can insert 
or remove a microSD card without switching the phone off.
Important: Do not remove the memory card in the middle of an operation when 
the card is being accessed. Removing the card in the middle of an operation may 
damage the memory card as well as the device, and data stored on the card may be 
corrupted.
Insert a microSD card
Note that the memory card may be supplied with the phone.
1. Open the side door (1).
2. Place...

12
Tip: If you want to save battery power, you can use the phone only in the 
GSM network. Select Menu> Settings> Phone sett.> Phone> Network > 
Network mode > GSM. When GSM network is selected, you do not have all 
UMTS (3G) services available. 
■Switch the phone on and off
Press and hold the power key.
If the phone asks for a PIN code, enter the PIN code, and select OK.
If the phone asks for the lock code, enter the lock code, and select 
OK. The factory setting for the lock code is 12345.
■Set time...

13
Note: As with any radio transmitting device, 
avoid touching an antenna unnecessarily 
when the antenna is in use. For example, avoid 
touching the cellular antenna during a phone 
call. Contact with a transmitting or receiving 
antenna affects the quality of the radio 
communication, may cause the device to 
operate at a higher power level than otherwise 
needed, and may reduce the battery life.
Cellular antenna (1)
Bluetooth antenna (2)
■Configuration settings
Before you can use multimedia...

14
2. Your phone
■Keys and parts
Secondary camera lens (1)
Earpiece (2)
Display (3)
Left and right selection keys (4)
Clear key (5)
Menu key (6),
hereafter described as select  Menu
Call key (7)
End key (8)
Navi™ scroll key (9)
hereafter referred to as scroll key
Number keys (10)
Monospeaker (11)
microSD card slot (12)
Strap holder (13)
USB connector (14)
Nokia AV 2.5-mm connector (15)
Charger connector (16)
Main camera lens (17)
Camera flash (18)
Power key (19)
Volume keys (20)
Camera key (21)
Warning:...

15
To open the list of last dialed numbers, press the call key.
To use the voice commands or voice dialing, press and hold the right selection key.
To change the profile, press the power key, and select a profile.
To start a connection to the web, press and hold  0.
Active standby
When active standby is enabled, you  can use the display for fast access to 
frequently used applications. To select whet her the active standby is shown, select 
Menu > Settings > Phone sett. > General > Personalisation >...

16
The phone is in offline mode and not connected to a cellular network. See 
“Offline profile,” p. 15.
You received one or several messages to the Inbox folder in Messaging. 
You received new e-mail in your remote mailbox.
There are messages waiting to be sent in Outbox. See “Outbox,” p. 35.
You have missed calls. See “Recent calls,” p. 28.
Shown if Ringing type is set to Silent and Message alert tone and E-mail 
alert tone are set to Off. See “Profiles,” p. 62.
The phone keypad is locked. See “Keypad...

17
Data is being transmitted using Bluetooth. See “Bluetooth connection,” 
p. 85.
A USB connection is active.
Other indicators may also be shown. 
■Scroll and select
To scroll left, right, up, or down, press the edges of the scroll key. To select the 
highlighted item, press the center of the scroll key.
Mark and unmark items
To mark or unmark a list item in applications, press #. To mark or unmark several 
consecutive items in a list, press and hold #, and scroll up or down.
■Menu
In the menu you can...

18
■Welcome application
Welcome application starts when you switch on your phone for the first time. 
With the Welcome application, you can access the following applications:
Tutorial—Learn about the features of your phone and how to use them.
Sett. wizard—Configure connection settings.
Transfer—Copy or synchronize data from other compatible phones.
To open Welcome later, select Menu> Applications> Welcome.
■Tutorial
Tutorial contains an introduction to the phone features and a tutorial to teach 
how to...

19
■Access codes
Select Select Menu> Settings> Phone sett.> General> Security > Phone and 
SIM card to set how your phone uses the access codes.
Lock code
The lock code (5 digits) helps to protect your phone against unauthorized use. The 
preset code is 12345. Change the code, and keep the new code secret and in a safe 
place separate from your phone. You can change the code and set the phone to 
request the code. 
If you enter an incorrect lock code five times in succession, the phone ignores 
further...

20
Barring password
The barring password (4 digits) is required when using Call barring. See “Call 
barring,” p. 75. You can obtain the password from your service provider.
If you enter an incorrect barring password three times in succession, the password 
is blocked. Contact your service provider.
■Download!
Download! (network service) is a mobile content shop available on your device. 
With Download! you can discover, preview, buy, download, and upgrade content, 
services, and applications. The items...