Nokia 5800d1 User Manual

							LAN connection. Using encryption reduces the risk of
unauthorised access to your data.WLAN connectionsTo use a wireless LAN (WLAN) connection, you must create an
internet access point (IAP) for WLAN. Use the access point for
applications that need to connect to the internet.
A WLAN connection is established when you create a data
connection using a WLAN internet access point. The active
WLAN connection ends when you end the data connection.
You can use WLAN during a voice call or when packet data is
active. You can only be connected to one WLAN access point
device at a time, but several applications can use the same
internet access point.
When the device is in the offline profile, you can still use WLAN
(if available). Remember to comply with any applicable safety
requirements when establishing and using a WLAN
connection.
Tip: To check the unique media access control (MAC)
address that identifies your device, open the dialler
and enter *#62209526#.
WLAN wizardSelect Menu > Settings and Connectivity > Wireless
LAN.
The WLAN wizard helps you to connect to a wireless LAN
(WLAN) and manage your WLAN connections.
If the search finds WLANs, to create an internet access point
(IAP) for a connection and start the web browser using this
IAP, select the connection and Start web browsing.
If you select a secured WLAN, you are asked to enter the
relevant password. To connect to a hidden network, you must
enter the correct network name (service set identifier, SSID).
If you already have the web browser running using the
currently active WLAN connection, to return to the web
browser, select Continue web browsing. To end the active
connection, select the connection and Disconnect WLAN.WLAN internet access pointsSelect Menu > Settings and Connectivity > Wireless
LAN.
Filter out WLANs from the list of found networks —  Select
Options > Filter WLAN networks. The selected networks
are not displayed the next time the WLAN wizard searches for
WLANs.
View the details of a network —  Select Options >
Details. If you select an active connection, the connection
details are displayed.Operating modesThere are two operating modes in WLAN: infrastructure and
ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a WLAN access point device, or wireless devices
Connectivity
© 2011 Nokia. All rights reserved.71 
						

							are connected to a wired LAN through a WLAN access point
device.
In the ad hoc operating mode, devices can send and receive
data directly with each other.Wireless LAN settingsIn the wireless LAN (WLAN) settings, you can define whether
the WLAN indicator is displayed when a network is available
and how often the network is scanned. You can also define
whether and how the internet connectivity test is performed,
and view advanced WLAN settings.
Select Menu > Settings and Connectivity > Wireless
LAN > Options > Settings.
Display 
 when a WLAN is available —  Select Show WLAN
availability > Yes.
Set how often the device searches for available WLAN — 
Select Show WLAN availability > Yes and Scan for
networks.
Define internet capability test settings —  Select Internet
connectivity test and whether to run the test automatically
or after confirmation, or to never run the test. If the
connectivity test is successful, the access point is saved to the
internet destinations list.
View advanced settings —  Select Options > Advanced
settings. It is recommended that you do not modify the
advanced WLAN settings.
Access pointsCreate a new access pointSelect Menu > Settings and Connectivity >
Destinations.
You may receive access point settings in a message from a
service provider. Some or all access points may be preset for
your device by your service provider, and you may not be able
to change, create, edit, or remove them.
1. Select 
Access point.
2. The device asks to check for available connections. After
the search, connections that are already available are
shown and can be shared by a new access point. If you
skip this step, you are asked to select a connection
method and to define the settings needed.
To view access points stored in your device, select an access
point group. The different access point groups are the
following:
   Internet access points   Multimedia messaging access points   WAP access points   Uncategorised access points
The different access point types are indicated with the
following:   Protected access point   Packet data access point
Connectivity
© 2011 Nokia. All rights reserved. 72 
						

							   Wireless LAN (WLAN) access pointManage access point groupsTo avoid selecting a single access point every time the device
makes a network connection, you can create a group that
contains various access points to connect to that network and
define the order in which the access points are used. For
example, you can add wireless LAN (WLAN) and packet data
access points to an internet access point group, and use the
group for browsing the web. If you give WLAN the highest
priority, the device connects to the internet through WLAN,
if available, and through a packet data connection if not.
Select Menu > Settings and Connectivity >
Destinations.
Create a new access point group —  Select Options >
Manage > New destination.
Add access points to an access point group —  Select the
group and Options > New access point.
Copy an existing access point from another group — 
Select the group, go to the access point to copy, and select
Options > Organise > Copy to other dest..
Change the priority of an access point within a group — 
Select Options > Organise > Change priority.Packet data access point settingsSelect Menu > Settings and Connectivity >
Destinations > Access point, and follow the instructions.
Edit a packet data access point —  Select an access point
group and access point marked with 
. Follow the
instructions from your service provider.
Select from the following:
●Access point name  — The access point name is provided
by your service provider.
●User name  — The user name may be needed to make a
data connection, and is usually provided by your service
provider.
●Prompt password  — If you must enter the password
every time you log in to a server, or if you do not want to
save your password in the device, select Yes.
●Password  — A password may be needed to make a data
connection, and is usually provided by your service
provider.
●Authentication  — To always send your password
encrypted, select Secure. To send your password
encrypted when possible, select Normal.
●Homepage  — Depending on the access point you are
setting up, enter the web address or the address of the
multimedia message centre.
●Use access point  — Set the device to connect to the
destination using this access point after confirmation or
automatically.
Modify advanced packet data access point settings — 
Select Options > Advanced settings.
Select from the following:
Connectivity
© 2011 Nokia. All rights reserved.73 
						

							●Network type  — Select the internet protocol type to
transfer data to and from your device. The other settings
depend on the selected network type.
●Phone IP address (for IPv4 only) — Enter the IP address
of your device.
●DNS addresses  — Enter the IP addresses of the primary
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your internet
service provider.
●Proxy server address  — Enter the address of the proxy
server. 
●Proxy port number  — Enter the port number of the proxy
server.WLAN access point settingsSelect Menu > Settings and Connectivity >
Destinations > Access point, and follow the instructions.
Edit a wireless LAN (WLAN) access point —  Select an access
point group and access point marked with 
. Follow the
instructions from your WLAN service provider.
Select from the following:
●WLAN network name  — Select Enter manually or
Search for networks. If you select an existing network,
the WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
●Network status  — Define whether the network name is
displayed.
●WLAN network mode  — Select Ad-hoc to create an ad
hoc network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
ad hoc network, all devices must use the same WLAN
network name.
●WLAN security mode  — Select the encryption used: WEP,
802.1x, orWPA/WPA2 (802.1x and WPA/WPA2 are not
available for ad hoc networks). If you select Open
network, no encryption is used. The WEP, 802.1x and WPA
functions can be used only if the network supports them.
●Homepage  — Enter the web address of the starting page.
●Use access point  — Set the device to create a connection
using this access point automatically or after
confirmation.
The available options may vary.View your active data connectionsSelect Menu > Settings and Connectivity > Connection
mgr..
In the active data connections view, you can see your data
connections:   data calls   packet data connections   WLAN connections
Close a connection —  Select Options > Disconnect.
Close all open connections —  Select Options >
Disconnect all.
View the details of a connection —  Select Options >
Details.
Connectivity
© 2011 Nokia. All rights reserved. 74 
						

							Synchronisation
 With the Synchronisation application, you can
synchronise your notes, messages, browser bookmarks, and
contacts with compatible applications on a compatible PC or
on the internet.
Select Menu > Settings and Connectivity > Data
transfer > Sync.
You may receive synchronisation settings in a special
message from your service provider.
A synchronisation profile contains the necessary settings for
synchronisation. When you open the application, the default
or previously used synchronisation profile is displayed.
Create a new synchronisation profile —  Select Options >
New sync profile.
Define the features included in the synchronisation
profile —  Select a synchronisation item to include it in the
profile or to leave it out.
Manage synchronisation profiles —  Select Options and
the desired option.
Synchronise data —  Select Options > Synchronise.
Bluetooth connectivityAbout Bluetooth connectivityWith Bluetooth connectivity, you can make a wireless
connection to other compatible devices, such as mobile
devices, computers, headsets, and car kits.
You can use the connection to send items from your device,
transfer files from your compatible PC, and print files with a
compatible printer.
 Select Menu > Settings and Connectivity >
Bluetooth.
Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need to be in
direct line-of-sight. However, they must be within 10 metres
(33 feet) of each other, although the connection may be
subject to interference from obstructions such as walls or
from other electronic devices.
This device is compliant with Bluetooth Specification 2.0 +
EDR supporting the following profiles: advanced audio
distribution, basic imaging, device identification, dial-up
networking, file transfer, generic access, generic audio/video
distribution, generic object exchange, hands-free, headset,
object push, phone book access, serial port, and SIM access.
To ensure interoperability between other devices supporting
Bluetooth technology, use Nokia approved accessories for
this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
When the device is locked, only connections to authorised
devices are possible.
Features using Bluetooth technology increase the demand on
battery power and reduce the battery life.
Bluetooth settingsSelect Menu > Settings and Connectivity > Bluetooth.
Connectivity
© 2011 Nokia. All rights reserved.75 
						

							Select from the following:
●Bluetooth  — Activate Bluetooth connectivity.
●My phones visibility  — To allow your device to be visible
to other Bluetooth devices, select Shown to all. To set a
length of time, after which the visibility is set from shown
to hidden, select Set visibility period. To hide your device
from other devices, select Hidden.
●My phones name  — Edit the name of your device. The
name is shown to other Bluetooth devices.
●Remote SIM mode  — Allow another device, such as a
compatible car kit accessory, to use the SIM card in your
device to connect to the network.Security tipsSelect Menu > Settings and Connectivity > Bluetooth.
When you are not using Bluetooth connectivity, to control
who can find your device and connect to it, select
Bluetooth > Off or My phones visibility > Hidden.
Deactivating the Bluetooth function does not affect other
functions in your device.
Do not pair with or accept connection requests from an
unknown device. This helps to protect your device from
harmful content. Operating the device in hidden mode is a
safer way to avoid malicious software.Send data using Bluetooth connectivityYou can have several Bluetooth connections active at a time.
For example, if you are connected to a compatible headset,
you can also transfer files to another compatible device.
1. Open the application where the item you want to send is
stored.
2. Go to an item, and select Options > Send > Via
Bluetooth.
Devices with Bluetooth wireless technology that are
within range are displayed. Device icons are as follows:
   computer   phone   audio or video device   other device
To interrupt the search, select Stop.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter a
passcode. The same passcode must be entered in both
devices.
When the connection is established, Sending data is
displayed.Tip: When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, in the home screen,
enter *#2820#.
Pair devicesYou can pair your device with a compatible device to make
subsequent Bluetooth connections between the devices
quicker. Before pairing, create your own passcode (1 to 16
Connectivity
© 2011 Nokia. All rights reserved. 76 
						

							digits), and agree with the owner of the other device to use
the same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
Select Menu > Settings and Connectivity > Bluetooth.
1. Open the Paired devices tab.
2. Select Options > New paired device. Devices that are
within range are displayed.
3. Select the device.
4. Enter the passcode on both devices. indicates a paired device in the device search view.
Connect to an accessory after pairing —  Select Options >
Connect to audio device. Some audio accessories connect
automatically to your device after pairing.
Set a device as authorised —  Select Set as authorised.
Connections between your device and the authorised device
can be made without your knowledge. Use this only for your
own devices, such as your compatible headset or PC, or
devices that belong to someone you trust. 
 indicates
authorised devices in the paired devices view.
Cancel a pairing with a device —  Select Options >
Delete.
Cancel all pairings —  Select Options > Delete all.
Receive data using Bluetooth connectivityWhen you receive data using Bluetooth connectivity, a tone
sounds, and the device asks you if you want to accept the
message. If you accept, 
 is displayed, and you can find an
informative message about the data in the Inbox folder in
Messaging. The received data is automatically saved to the
device memory. Messages received using Bluetooth
connectivity are indicated with 
.
Block devicesYou can prevent devices from establishing a Bluetooth
connection to your device.
Select Menu > Settings and Connectivity > Bluetooth.
Block a device —  On the Paired devices tab, go to a device
you want to block, and select Options > Block.
Unblock a device —  On the Blocked devices tab, go to a
device, and select Options > Delete.
Unblock all blocked devices —  Select Options > Delete
all.
If you reject a pairing request from another device, you are
asked if you want to block all future connection requests from
this device. If you accept the query, the device is added to the
list of blocked devices.Remote SIM modeWith remote SIM mode, you can use a compatible car kit
accessory. Before remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from the
other device. When pairing, use a 16-digit passcode, and set
the other device as authorised.
Select Menu > Settings and Connectivity > Bluetooth.
Connectivity
© 2011 Nokia. All rights reserved.77 
						

							Activate remote SIM mode1. Activate Bluetooth connectivity. Select Bluetooth.
2. Activate remote SIM mode in your device. Select Remote
SIM mode.
3. Activate remote SIM mode in the other device.
When remote SIM mode is activated, Remote SIM mode is
displayed in the home screen. The connection to the wireless
network is closed, and you cannot use SIM card services or
features that require cellular network coverage.
When your device is in remote SIM mode, you can only make
or receive calls using the connected accessory. Your device
can only make calls to the emergency numbers programmed
into your device.
Deactivate remote SIM mode —  Press the power key, and
select Exit remote SIM mode.Transfer data using a USB cable
 Select Menu > Settings and Connectivity > USB.
Select the USB mode every time
a compatible data cable is
connected —  Select Ask on
connection > Yes.
If the Ask on connection option is
not active, or you want to change
the USB mode during an active
connection, select USB connection
mode and from the following:
●Ovi Suite  — Use Nokia PC
applications such as Nokia Ovi
Suite or Nokia Software Updater.
●Mass storage  — Transfer data
between your device and a
compatible PC.
●Image transfer  — Print images using a compatible
printer.
●Media transfer  — Synchronise music with Nokia Music or
Windows Media Player.PC connectionsYou can use your mobile device with a variety of compatible
PC connectivity and data communications applications. With
Nokia Ovi Suite you can, for example, transfer files and images
between your device and a compatible computer.
To use Ovi Suite with USB connection mode, select Ovi Suite
mode.
For more information about Ovi Suite, see the support area
at www.ovi.com.
Connectivity
© 2011 Nokia. All rights reserved. 78 
						

							Administrative settingsSelect Menu > Settings and Connectivity > Admin.
settings.
To set the online time for the data call connection, select Data
call. The data call settings affect all access points that use a
GSM data call.SIP settingsSelect Menu > Settings and Connectivity > Admin.
settings > SIP settings.
Session Initiation Protocol (SIP) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your service provider.
You can view, delete, or create these setting profiles in SIP
settings.Access point name controlSelect Menu > Settings and Connectivity > Admin.
settings > APN control.
With the access point name control service, you can restrict
packet data connections and allow your device to use only
certain packet data access points.
This setting is only available if your SIM card supports the
access point control service.
To turn the control service on or off, or to change the allowed
access points, select Options and the corresponding option.
To change the options, you need your PIN2 code. Contact your
service provider for the code.Packet data settingsSelect Menu > Settings and Connectivity > Admin.
settings > Packet data.
The packet data settings affect all access points using a
packet data connection.
Select from the following:
●Packet data connection  —  I f  y o u  s e l e c t  When available
and you are in a network that supports packet data, the
device registers to the packet data network. Starting an
active packet data connection (for example, to send and
receive e-mail) is quicker than if the device establishes a
packet data connection when needed. If there is no packet
data coverage, the device periodically tries to establish a
packet data connection. If you select When needed, the
device uses a packet data connection only if you start an
application or action that needs it.
●Access point  — The access point name is needed to use
your device as a packet data modem to a compatible
computer.
●High speed packet access  — Enable or disable the use
of HSDPA (network service) in UMTS networks.
Connectivity
© 2011 Nokia. All rights reserved.79 
						

							15. Share onlineAbout Share onlineSelect Menu > Internet > Share online.
With Share online (network service), you can post your
images, video clips, and sound clips from your device to
compatible online sharing services, such as albums and
blogs. You can also view and send comments to the posts in
these services, and download content to your compatible
Nokia device.
The supported content types and the availability of the Share
online service may vary.Subscribe to servicesSelect Menu > Internet > Share online.
To subscribe to an online sharing service, go to the service
providers website, and check that your Nokia device is
compatible with the service. Create an account as instructed
on the website. You receive a user name and password
needed to set up your device with the account.
1. To activate a service, open the Share online application in
your device, select a service and Options > Activate.
2. Allow the device to create a network connection. If you
are prompted for an internet access point, select one from
the list.
3. Sign in to your account as instructed on the service
provider’s website.
For the availability and cost of the third party services and
data transfer costs, contact your service provider or the
relevant third party.Manage your accountsTo view your accounts, select Options > Settings > My
accounts.
To create a new account, select Options > Add new
account.
To change your user name or password for an account, select
the account and Options > Open.
To set the account as the default when sending posts from
your device, select Options > Set as default.
To remove an account, select the account and Options >
Delete.Create a postSelect Menu > Internet > Share online.
To post media files to a service, go to a service, and select
Options > New upload. If the online sharing service
provides channels for posting files, select the desired
channel.
To add an image, video clip, or sound clip to the post, select
Options > Insert.
Share online
© 2011 Nokia. All rights reserved. 80