Nokia 3390 User Guide

							17
[ 108 ] Octave
This indicates the pitch range of the note. 
The higher the number, the higher the pitch 
range.
Press   to select different 
octaves.
Octave 1
Octave 2
Octave 3
Clear screen
Caution: This option erases the tone completely!
1Press Options
 and scroll to Clear screen
.
2Press OK
 to erase the entire tone. 
						

							[ 109 ]Fun and games
17
Rests and Sharps
• Press   to insert brief pauses between notes, known as rests. 
• Press   to make the rest shorter, or   to make the rest 
longer.
• Press   to make the note sharp.
The note plays again at the higher pitch.
Play the tone
1Press Options
.
Play
 appears highlighted.
2Press OK
.
The new tone plays.
Set the tempo
1After entering notes in Composer, press Options
 and scroll to Tempo
.
2Press OK
.
Tempo ranges from 40 BPM (slow) to 225 BPM (fast).
3Scroll to the tempo you want and press Select
. 
4Scroll to Play
 and press OK
 to hear the tone at the new tempo.
Save the tone
1After entering notes in Composer, press Options
 and scroll to Save
.
2Press OK
.
3Enter a name for the tone and press OK
.
The tone name now appears in the Ringing tone
 list. 
						

							17
[ 110 ]
Send the tone
You can send the tone to another phone.
Tip: Before sending the tone to another phone, set the message mode 
to Messages sent as text. See “Set the message mode” on page 79.
1Press Menu 10
.
2When the tone appears, press Options
.
3Scroll to Send
 and press OK
.
The tone name appears.
4Press OK
.
5Enter or recall from the phone book the number to which you want 
to send the tone.
6Press OK
. 
						

							[  111  ]Reference information
18
18. Reference information
• Batteries, chargers, and accessories
This section provides information about the phone’s batteries, accessories, 
and chargers. Be aware that the information in this section is subject to 
change as the batteries, chargers, and accessories change.
This phone is intended for use when supplied with power from the PPH-1 
car kit, an ACP-7U, an ACP-8U, LCH-8, or an LCH-9 charger. Other usage 
could invalidate any approval given to this apparatus and might be dangerous.
Warning: When you purchase batteries, chargers, and accessories for 
your phone, use only batteries, chargers, and accessories that have 
received approval from the phone’s manufacturer. The use of any 
other type of phone-related hardware may invalidate any approval 
or warranty applying to the phone, and could also be dangerous. For 
availability of approved batteries, chargers, and accessories, check 
with your dealer.
Note: For information on how to charge and recharge your battery, 
refer to “Charge the battery” on page 10.
When the battery is 80% charged the battery bar stops scrolling. Battery 
full
 appears also, if the phone is on. To obtain 100% battery capacity, 
allow another 2 hours for a “trickle” or “maintenance” charge.
When you are not using a charger, disconnect it from the power source. Do 
not leave the battery connected to a charger for more than a week, since 
overcharging could shorten its life span. If left unused, a fully-charged battery 
will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge. 
Therefore, allow it to cool down or warm up before trying to charge it.
When the battery is running out of power and your phone only has a few 
minutes of talk time remaining, a warning tone sounds and the Battery
 low 
message appears 
briefly. When no more talk time is left, a warning tone is 
sounded and the phone switches itself off. 
						

							18
[ 112 ] Do not short-circuit the battery. Accidental short-circuiting can occur 
when a metallic object, like a coin, a clip, or a pen causes a direct connection 
of the + and - terminals of the battery, which are metal strips on top of 
the battery.
An example of short-circuiting could occur if you carry a spare battery in 
your pocket or purse, where the battery could come into contact with  
objects such as a coin. Short-circuiting could damage either the battery 
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in 
either summer or winter conditions, will reduce the capacity and lifetime 
of the battery. Always try to keep the battery between 15°C and 25°C 
(59°F and 77°F).
A phone with a hot or cold battery might not work temporarily, even if the 
battery is fully charged. The performance of batteries is particularly limited 
in temperatures below 0°C (32°F).
The following list provides guidelines that you can follow:
• When the operating time (talk time and standby time) is noticeably 
shorter than normal, buy a new battery.
• Use the battery only for its intended purpose.
• Never use any charger or battery that is damaged and/or worn out.
• Batteries must be recycled or disposed of properly. Do not dispose of 
batteries by putting them in fire!
• When you disconnect the power cord of any accessory, grasp and pull 
the plug, not the cord.
• Important safety information
This section provides additional safety information. A brief overview of 
safety can be found in “For your safety” on page 1. 
						

							[ 113 ]Reference information
18
Traffic safety
Do not use a handheld telephone while driving a vehicle. Always park the 
vehicle before using the phone.
After completing your phone conversation, always secure the phone back 
into its holder; do not place the phone on the passenger seat or place it 
where it can break loose in a collision or during a sudden stop.
Caution: The use of an alert device to operate a vehicle’s lights or 
horn on public roads is not permitted.
Remember: Safety—Your most important call.
Operating environment
Remember to follow any special regulations that are in force in any area, and 
always switch off your phone wherever it is forbidden to use it. Otherwise, 
the use of your phone could cause interference or danger.
When connecting the phone or any accessory to another device, read the 
associated user guide first and obtain detailed safety instructions.
Note: Do not connect incompatible products.
As with other mobile radio transmitting equipment, you are advised that, 
for the satisfactory operation of the equipment and for the safety of 
personnel, it is recommended that the phone should only be used in the 
normal operating position. This position is when the phone is held to your 
ear with the antenna pointing over your shoulder.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF) 
signals. However, certain electronic equipment might not be shielded against 
the RF signals from your wireless phone. The following four subsections 
provide more information about this topic. 
						

							18
[ 114 ]
Pa c em ak er s
Pacemaker manufacturers recommend that a minimum separation of 6 inches 
(20 cm) should be maintained between a handheld wireless phone and a 
pacemaker to avoid potential interference with the pacemaker. These 
recommendations are consistent with the independent research by and 
recommendations of Wireless Technology Research. Persons with pacemakers:
• Should always keep the phone more than 6 inches (20 cm) from their 
pacemakers when the phone is switched on.
• Should not carry the phone in a breast pocket.
• Should use the ear opposite the pacemaker to minimize the potential 
for interference.
Caution: If you have any reason to suspect that interference is 
taking place, switch off your phone immediately.
Hearing aids
Some digital wireless phones could interfere with some hearing aids. In the 
event of such interference, you might want to consult your service provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular phones, 
could interfere with the functionality of inadequately protected medical 
devices. Consult a physician or the manufacturer of the medical device to 
determine if they are adequately shielded from external RF energy. Also 
contact these authorities if you have any questions.
Switch off your phone in health care facilities or where any posted regulations 
instruct you to do so. Hospitals or health care facilities could be using 
equipment that is sensitive to external RF energy.
Vehicles
RF signals could improperly affect installed or inadequately shielded 
electronic systems in motor vehicles. These could include electronic fuel 
injection systems, electronic anti-skid (anti-lock) braking systems, electronic 
speed control systems, or air bag systems. 
						

							[ 115 ]Reference information
18
Check with the manufacturer or its representative regarding your vehicle. 
You should also consult the manufacturer of any equipment that has been 
added to your vehicle.
Posted facilities
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone if you are in any area that has a potentially explosive 
atmosphere, and obey all signs and instructions. Sparks in such areas 
could cause an explosion or fire, resulting in bodily injury or even death.
You are advised to switch off the phone while at a refueling point (service 
station). And, you are reminded of the need to observe restrictions regarding 
the use of radio equipment in fuel depots (fuel storage and distribution areas), 
chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often—but not always—
clearly marked. These areas include the following: below deck on boats; 
chemical transfer or storage facilities; vehicles using liquefied petroleum 
gas (such as propane or butane); areas where the air contains chemicals 
or particles, such as grain, dust, or metal powders; and any other area 
where you would normally be advised to turn off your vehicle engine.
Ve h ic le s
Only qualified personnel should service the phone or install the phone in 
a vehicle. Faulty installation or service could be dangerous and might 
invalidate any warranty that could apply to the unit.
Regularly check that all wireless phone equipment in your vehicle is mounted 
and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials in 
the same compartment as the phone, its parts, or its accessories.
For vehicles equipped with an air bag, remember that an air bag inflates 
with great force. Do not place objects, including both the installed or the 
portable wireless equipment, in the area over the air bag or in the air bag 
deployment area. If the in-vehicle wireless equipment is improperly installed 
and the air bag inflates, serious injury could result. 
						

							18
[ 116 ] Switch off your phone before boarding an aircraft. The use of wireless 
telephones in an aircraft may be dangerous to the operation of the 
aircraft, may disrupt the wireless telephone network, and may be illegal.
Failure to observe these instructions could lead to the suspension or the 
denial of telephone services to the offender, or it could result in legal action, 
or both scenarios could apply.
• Emergency calls
IMPORTANT!
This phone, like any wireless phone, operates using radio signals, 
wireless and landline networks, and user-programmed functions. 
Because of this, connections in all conditions cannot be guaranteed. 
Therefore, you should never rely solely on any wireless phone for 
essential communications (for example, medical emergencies).
Remember, to make or receive any calls, the phone must be switched on 
and be used in a service area that has adequate signal strength. Emergency 
calls might not be possible on all wireless phone networks or when certain 
network services and/or phone features are in use. Check with local 
service providers.
Always make sure that your phone is properly charged before attempting 
any emergency calls. If you allow your battery to become empty, you will be 
unable to receive or make calls, including emergency calls. You must then 
wait a few minutes after the charging begins to place any emergency calls.
Make an Emergency Call
1If the phone is not on, switch it on.
Some networks may require that a valid SIM card is properly inserted 
in the phone.
2Enter the emergency number for your present location (for example, 911 
or any other official emergency number. Emergency numbers vary by 
location).
3Press Call
. 
						

							[ 117 ]Reference information
18
If certain features are in use (Fixed dialing, restrict calls, and so on), you 
might first need to turn those features off before you can make an emergency 
call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all of the necessary 
information as accurately as possible. Remember that your wireless phone 
might be the only means of communication at the scene of an accident—
do not terminate the call until given permission to do so.
Certification Information (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR 
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and 
manufactured not to exceed the emission limits for exposure to radio 
frequency (RF) energy set by the Federal Communications Commission of 
the U.S. Government. These limits are part of comprehensive guidelines 
and establish permitted levels of RF energy for the general population. The 
guidelines are based on standards that were developed by independent 
scientific organizations through periodic and thorough evaluation of 
scientific studies. The standards include a substantial safety margin 
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of 
measurement known as the Specific Absorption Rate, or SAR. The SAR limit 
set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard 
operating positions accepted by the FCC with the phone transmitting at 
its highest certified power level in all tested frequency bands. Although 
the SAR is determined at the highest certified power level, the actual SAR 
level of the phone while operating can be well below the maximum value. 
This is because the phone is designed to operate at multiple power levels 
so as to use only the power required to reach the network. In general, the 
closer you are to a wireless base station antenna, the lower the power output.