Nokia 2600c2 User Guide

Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative
(-) terminals of the battery. (These look like metal strips on
the battery.) This might happen, for example, when you
carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or the
connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or...

Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To
check that you are getting an original Nokia battery,
purchase it from an authorised Nokia dealer, and inspect
the hologram label using the following steps:
Successful completion of the steps is not a total assurance
of the authenticity of the battery. If you have any reason
to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it
to the nearest...

2. When you angle the hologram left,
right, down and up, you should
see 1, 2, 3 and 4 dots on each side
respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please
do not use the battery. Take it to the nearest authorised
Nokia service point or dealer for assistance. The use of a
battery that is not approved by the manufacturer may be
dangerous and may result in poor performance and
damage to your...

Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
●Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
●Do not use or store the device in dusty, dirty areas. Its
moving...

●Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
●Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
●Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
●Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
●Use chargers indoors.
●Always...

Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you that in
the European Union all electrical and electronic
products, batteries, and accumulators must be taken
to separate collection at the end of their working life. Do
not dispose of these products as unsorted municipal waste.
Return the products to collection to prevent possible harm
to the environment or human health from uncontrolled
waste disposal and to promote the sustainable reuse of
material...

positioned at least 2.2 centimeters (7/8 inches) away from
the body. When a carry case, belt clip, or holder is used for
body-worn operation, it should not contain metal and
should position the device the above-stated distance from
your body.
To transmit data files or messages, this device requires a
quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
distance instructions are followed...

Implanted medical devices
Manufacturers of medical devices recommend that a
minimum separation of 15.3 centimeters (6 inches) should
be maintained between a wireless device and an
implanted medical device, such as a pacemaker or
implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who have
such devices should:
●Always keep the wireless device more than 15.3
centimeters (6 inches) from the medical device when
the wireless device is turned on.
●Not carry...

Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid
(antilock) braking systems, electronic speed control
systems, and air bag systems. For more information, check
with the manufacturer, or its representative, of your
vehicle or any equipment that has been added.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service...

the operation of the aircraft, disrupt the wireless
telephone network, and may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where
you would normally be advised to turn off your vehicle
engine. Sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death. Switch off the
device at refuelling points such as...