Nokia 2330c2 Owners Manual

When connecting to any other device, read its user guide
for detailed safety instructions. Do not connect
incompatible products.
The images in this guide  may differ from your device
display.
Network services
To use the device you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on all
networks; other networks may require that you make
specific arrangements with  your service provider before
you can use the network...

This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as multimedia me ssaging (MMS), browsing, and e-mail
application, require network support for these
technologies.
Shared memory
The following features in th is device may share memory:
multimedia messaging (MMS),  e-mail application, instant
messaging. Use of one or more of these features may
reduce the memory availabl e for the remaining features
sharing memory. Your device may display...

The PIN code supplied with the SIM card protects the card
against unauthorized use. The PIN2 code supplied with
some SIM cards is required to access certain services. If you
enter the PIN or PIN2 code incorrectly three times in
succession, you are asked for the PUK or PUK2 code. If you
do not have them, contact your service provider.
The module PIN is required to  access the information in the
security module of your SI M card. The signing PIN may be
required for the digital signature. The restriction...

If the issue remains unsolved, contact Nokia for repair
options. See  www.nokia.com/repair, or in Latin America,
www.nokia-latinoamerica.com/c e
ntrosdeservicio. 
Before sending yourdevice for repair, always back  up the 
data in your device.
2. Get started
Install SIM card and battery
Always switch the device o ff and disconnect the charger
before removing the battery.
The SIM card and its contacts  can be easily damaged by
scratches or bending, so be careful when handling,
inserting, or removing the...

Charge the battery
Your battery has been partially charged at the factory. If
the device indicates a low  charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
3. When the device indicates a full charge, disconnect the charger from
the device, then fr om the wall outlet.
You do not need to charge th e battery for a specific length
of time, and you can use the device while it charges. If the
battery is completely without charge, it may take several...

Headset
Warning:  Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use,  because the volume may be
extremely loud.
Warning:   When you use the headset, your ability
to hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
When connecting any external device or any headset, other
than those approved by Nokia for use with this device, to
the Nokia AV...

Keys and parts
1Earpiece
2Charger connector
3Headset connector
4Display
5Selection keys
6Navi™ key; hereafter referred
to as scroll key
7Call key
8End/Power key
9Keypad
10Release button
11Camera lens
12Loudspeaker
13Microphone
Note:  Avoid touching this connector as it is
intended for use by authoriz ed service personnel only.
© 2009 Nokia. All rights reserved. 17 

Switch the phone on and off
To switch the phone on or off, press and hold the power
key.
Standby mode
When the phone is ready for use, and you have not entered
any characters, the phone is in the standby mode.
1
Network signal strength
2Battery charge level
3Network name or operator logo
4Functions of selection keys
The left selection key is Go to for you to view the functions
in your personal shortcut list . When viewing the list, select
Options  >  Select options  to view the available functions,
or...

Keypad lock
To prevent accidental keypresses, select Menu, and press
*  within 3.5 seconds to lock the keypad.
To unlock the keypad, select  Unlock, and press  * within 1.5
seconds. If the security keyg uard is on, enter the security
code when requested.
To set the keypad to lock automatically after a preset time
when the phone is in th e standby mode, select Menu >
Settings  > Phone  > Automatic keyguard  > On.
To answer a call when the keypad is locked, press the call
key. When you end or reject  the...

Applications running in background
Leaving applications running in the background increases
the demand on battery power  and reduces the battery life.
3. Calls
Make and answer a call
To make a call, enter the phone number, including the
country code and area code if necessary. Press the call key
to call the number. Scroll up to increase or down to
decrease the volume of the earpiece or headset during the
phone call.
T o  a n s w e r  a n  i n c o m i n g  c a l l ,  p r ess the call key. To reject the...