Nikon Coolpix S80 User Manual

9
Main Display of the Monitor/Touch Panel and Basic Operations
Introduction
Shooting (Operation Controls)
Tap the following controls to change settings.
•Tap the tab to display the setting controls and shooting settings can be 
changed (A12).
•The controls available and the setting status displayed vary depending upon 
the shooting mode and the current camera settings.
* Indicators displayed vary with current shooting mode.
CMonitor Display in Portrait (“Tall”) Orientation
When the camera is held in...

10
Main Display of the Monitor/Touch Panel and Basic Operations
Introduction
Playback (Information Display)
The following monitor display shows information for the picture currently 
displayed and camera status.
•The information displayed on the monitor varies with the camera settings or 
status.
•The indicators below are displayed when the camera is turned on or is in 
operation, and they disappear after a few seconds elapse (A151).
1Indicators displayed vary depending on the setting for shooting.2The...

11
Main Display of the Monitor/Touch Panel and Basic Operations
Introduction
Playback (Operation Controls)
Tap the following controls to change settings.
•Tap the tab to display the setting controls (A12) and deleting or editing will 
be available.
•The controls available displayed vary depending upon the displayed picture 
and the current camera settings.
1Indicators displayed vary with the shooting mode.2Indicators displayed vary with current playback mode.
CPicture Display
When the camera is rotated,...

12
Main Display of the Monitor/Touch Panel and Basic Operations
Introduction
Opening the Tabs
When in shooting or playback mode, use the setting controls to make shooting 
and playback settings. Display the controls by tapping the tab at the bottom, left 
or right side of the monitor.
•Tap the icon of the desired item to display the setting screen for that item.
•Tap z (setup) in the setting controls to make the basic camera settings.
•When H or J is displayed on the setting screen, tap H to exit the...

13
Main Display of the Monitor/Touch Panel and Basic Operations
Introduction
Shooting
Shooting settings can be made.
•The available setting items vary depending on the shooting mode (A48).
•Each icon also indicates the current setting.
Playback
Pictures can be edited and deleted, and playback settings can be made.
•The available setting items vary depending on the type of picture or playback 
mode.
2
3
W
TOFFOFFOFFAUTOAUTO
0.00.00.0AUTOAUTO
1
W
T
OFFOFFOFF
1X Flash mode...

14
First Steps
First Steps
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL10 (supplied) into the camera.
•Charge the battery before the first use or when the battery is running low 
(A16).
1Slide the battery-chamber/memory 
card slot cover in the direction 
indicated by the arrow (
1) and open 
the cover (
2).
2Insert the battery.
Confirm that the battery’s positive (+) and 
negative (–) terminals are oriented correctly as 
shown on the label at the battery chamber 
opening, and insert...

15
Inserting the Battery
First Steps
Removing the Battery
Close the slide cover to turn the camera off 
(A19) and be sure that the power-on lamp 
and the monitor have turned off before opening 
the battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/ 
memory card slot cover and slide the orange 
battery latch in the direction indicated by the 
arrow (
1). The battery can then be removed by 
hand (
2).
•Note that the battery and memory card may become hot during use;...

16
First Steps
Charging the Battery
Charge the supplied Rechargeable Li-ion Battery EN-EL10 inserted into the 
camera, by connecting the supplied Charging AC Adapter EH-68P to the camera 
via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter 
into an electrical outlet.
1Prepare the Charging AC Adapter EH-
68P.
If a plug adapter* is included, attach the plug 
adapter to the plug on the Charging AC 
Adapter. Push the plug adapter firmly until it is 
securely held in place. Once the...

17
Charging the Battery
First Steps
4Plug the Charging AC Adapter into an 
electrical power outlet.
The power-on lamp slowly blinks orange to indicate 
that the battery is charging.
About 3 hours are required to charge a fully exhausted 
battery. 
The following chart explains power-on lamp status when the camera is plugged into the 
electrical power outlet.
5Disconnect the Charging AC Adapter from the electrical outlet and 
then disconnect the USB cable.
Power-on lampDescription
Blinks slowly...

18
Charging the Battery
First Steps
BNotes on Charging AC Adapter
•The Charging AC Adapter EH-68P is for use only with compatible devices. Do not use with another 
make or model of device.
•Be sure to read and follow the warnings for the Charging AC Adapter on page iii and the section, 
“The Battery” (A167), before use.
•The EH-68P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other 
countries, use a plug adapter (available commercially) as necessary. For more information...