Nikon Coolpix S7 User Manual

137
For Connection via Home Wireless LAN
Wireless Transfer Mode
5Start the Setup Utility.
For the initial installation run, the Setup Utility will launch automatically when
installation is complete.
From the second time, start the Setup Utility by following the procedure below:
Windows: Start the computer and select [Start] > [All programs] > [Wireless
Camera Setup Utility] > [Wireless Camera Setup Utility].
Macintosh: Start the computer and open [Applications] > [Nikon Software] >
[Wireless Camera Setup...

138
For Connection via Home Wireless LAN
Wireless Transfer Mode
8Choose the connection method.
Available profile types (see the list below) for your
wireless LAN will be displayed on screen. Select the
desired profile type and click [Next].
When selecting [Create an Ad-hoc (Camera to Com-
puter) network profile], proceed to step 11 (c139).
If multiple wireless LAN devices are connected to the
computer, choose a device from the pop-up menu.
Select the desired configuration type from the options
listed....

139
For Connection via Home Wireless LAN
Wireless Transfer Mode
9Enter network settings.
Enter the settings for connecting the camera and com-
puter via a wireless network.
When selecting [Create an Infrastructure (Access
Point) network profile] or [Create Infrastructure
(Access Point) and Ad-hoc (Camera to Computer) net-
work profiles] in step 8, select a network name from
the [Network Name (SSID)] list. This name will be used
when connecting the camera and computer.
When selecting [Create Profile...

140
For Connection via Home Wireless LAN
Wireless Transfer Mode
12Configure wireless printing.
If a printer is connected to the computer, check [Cre-
ate Wireless Printing Profile] and select the printer to
be used for wireless printing (c158).
Enter a profile name (up to 16 single-byte alphanu-
meric characters), select a printer, and click [Next].
If no printers are connected to the computer, click
[Next] without selecting a printer.
13Configure COOLPIX CONNECT. 
If using COOLPIX CONNECT, enter the...

141
For Connection via Home Wireless LAN
Wireless Transfer Mode
Settings for the Setup Utility 
When configuring a profile using the Setup Utility, refer to the description for
each item listed below. Settings are the same for Windows and Macintosh.
* Mandatory items
SettingsDescriptions
Network name 
(SSID)*Enter the network ID for the computer. Choose a value dis-
played. If multiple values are displayed, select one.
Network type*Select [Ad-hoc] or [Infrastructure]. The camera and computer 
must be set...

142
For Connection via Home Wireless LAN
Wireless Transfer Mode
jWireless LAN Channels
Wireless LAN channels for the COOLPIX S7c are from 1 to 11. Make sure that the channel for
your computer’s wireless LAN device is set to a channel between 1 and 11 (inclusive).
jMAC Address Filtering
When MAC address filtering is enabled, only devices with an authorized MAC address can
access the wireless LAN. Check the camera’s MAC address in [Firmware Version] of the setup
menu (c129) and add it to the authorized...

143
Wireless Transfer Mode
Transferring Pictures
Establishing a Wireless Connection
1Enter wireless transfer mode by pressing
D in shooting mode, selecting n (use
the rotary multi selector), and then
pressing d.
The wireless LAN start-up screen will be displayed and
the camera will search for available SSIDs.
2Choose the SSID and press d.
The SSIDs are listed in order of radio field strength.
Wireless connection has not yet been established.
The left icon of each SSID is indicated in red when
outside the...

144
Transferring Pictures
Wireless Transfer Mode
When Transfer is Complete
The message shown at right is displayed when the
transfer is complete.
• To repeat the transfer, press d. 
• To exit wireless transfer mode, press D and
choose another mode, or turn off the camera.
kWireless Transfer LEDThe wireless transfer LED (c6) is located on the side of the camera (inside the antenna). The
camera is searching for profiles when the LED blinks, a wireless connection is established
when the LED is lit, and the...

145
Transferring Pictures
Wireless Transfer Mode
Uploading Pictures to COOLPIX CONNECT
To use COOLPIX CONNECT, perform the following procedures.
1Choose [COOLPIX CONNECT] in step 3 of
“Establishing a Wireless Connection”
(c143) and press d.
2Enter your e-mail address correctly.
Choose [Input] in the sender information entry screen
and press d.
Enter your e-mail correctly in the address screen and
press the shutter-release button. Then enter your
(sender) name for the notification e-mail to recipients
and...

146
Transferring Pictures
Wireless Transfer Mode
3Choose [All images] or [Choose date]
and press d.
When choosing [All images], select the desired pic-
tures (up to 30) and press d to mark. Then press the
shutter-release button to apply selection.
When choosing [Choose date], select the shooting
date and press d to mark. Then press the shutter-
release button.
Select the desired pictures (up to 30) and press d to
mark. Then press the shutter-release button to apply
selection.
4Choose the size for the...