Nikon Coolpix S50c User Manual

							99
Shooting, Playback, and Setup Menus
Playback Options: The Playback Menu
The playback menu contains the following options.
Displaying the Playback Menu
Display the playback menu by pressing i and pressing m.
• Use the rotary multi selector to choose and apply settings. (c9)
• To exit the playback menu, press m.
wPrint setc85
Select pictures to print and the number of copies for each.
zSlide showc101
View pictures stored in the internal memory or on a memory card in 
an automatic slide show.
ADeletec102
Delete all or selected pictures.
DProtectc102
Protect selected pictures from accidental deletion.
ETransfer markingc103
Mark existing pictures to transfer to a computer.
GRotate imagec103
Change the orientation of an existing picture.
HSmall pic.c51
Create a small copy of the current picture.
LCopyc104
Copy files between memory card and internal memory.
Playback menu
Print set
Slide show
Delete
Protect
Transfer marking
Exit
Downloaded From camera-usermanual.com Nikon Manuals 
						

							100
Playback Options: The Playback Menu
Shooting, Playback, and Setup Menus
Selecting Multiple Pictures
When following the steps below to select multiple
pictures for a print set (c85), deletion (c102),
protection from deletion (c102), transfer
(c103), rotate (c103), copying between internal
memory and the memory card (c104), or for the
welcome screen (c107), the screen shown at right
is displayed. Follow the procedure described below
to select multiple pictures.
1Use the rotary multi selector to choose
the desired picture.
Only one picture can be selected for [Rotate image]
and [Welcome screen]. Proceed to step 3.
Press v (k) to switch to full-frame playback.
Press t (j) to switch back to thumbnail display.
2Press G or H to select [ON] or [OFF] (or
the number of copies).
When [ON] is selected, a check mark (y) is displayed
in the top left corner of the current picture. Repeat
steps 1 and 2 to select additional pictures.
3Press d.
The setting is enabled.
ON/OFF
Protect
Back
ON/OFF
Protect
Back
ON/OFF
Protect
Back
K
Done
Downloaded From camera-usermanual.com Nikon Manuals 
						

							101
Playback Options: The Playback Menu
Shooting, Playback, and Setup Menus
z Slide Show
Play back pictures stored in the internal memory or
on a memory card in an automated “slide show”.
1Display the slide show menu; use the
rotary multi selector to choose [Start]
and press d.
To change the interval between pictures, choose
[Frame intvl], select the desired interval time, and
press d before choosing [Start].
To repeat the slide show automatically, enable [Loop]
and press d before choosing [Start]. The check mark (y) will be added to the
loop option when enabled.
2The slide show begins. 
While the slide show is in progress, the following
operations can be performed:
• Use the rotary multi selector to switch pictures.
Continue rotating in either direction to fast forward
(clockwise) or rewind (counterclockwise).
• Press d to pause the slide show.
The menu shown at right is displayed when the slide
show ends or is paused. Choose [Restart] and press
d to play the slide show again, or choose [End] to
stop the slide show and return to the playback menu.
jNotes on Slide Show
• Only the first frame of movies (c68) included in slide shows is displayed.
• Even if [Loop] is selected, the monitor will turn off automatically if no operations are per-
formed for 30 minutes. The camera will turn off automatically if no operations are per-
formed for another three minutes.
Slide show
ExitLoop Frame intvlStart Pause:
Slide show
ExitLoop Frame intvlStart Pause:
Frame intvlRestart
End Pause
PausePause
Downloaded From camera-usermanual.com Nikon Manuals 
						

							102
Playback Options: The Playback Menu
Shooting, Playback, and Setup Menus
A Delete
The delete menu contains the options shown
below.
If no memory card is inserted in the camera, pic-
tures in the internal memory will be deleted.
If a memory card is inserted, pictures on the mem-
ory card will be deleted.
kNotes on Deletion
• Once deleted, pictures cannot be recovered. Transfer important images to a computer
before deletion.
• Pictures marked with the D icon are protected and cannot be deleted.
D Protect
Protect selected pictures from accidental deletion.
Note, however, that formatting will delete pro-
tected files (c117).
See “Selecting Multiple Pictures” (c100) for
more information on using this function.
Protected pictures are recognized by the D icon (c7) in full-frame play-
back mode and the erase selected images screen, and by the Q icon (c45)
in 9-picture thumbnail playback mode.
Erase selected images
Delete selected pictures (c100).
Erase all images
Delete all pictures stored in the internal memory or on the memory card.
• Choose [Yes] and press d in the confirmation 
dialog to delete all pictures.
• To exit without deleting pictures, choose [No] 
and press d.
Delete
Erase all images
ExitErase selected images
Delete
ExitYe sNo Erasing all images
(    excluded)
ON/OFF
Protect
Back
Downloaded From camera-usermanual.com Nikon Manuals 
						

							103
Playback Options: The Playback Menu
Shooting, Playback, and Setup Menus
E Transfer Marking
Change transfer marking (E) for existing pictures.
When the camera is connected to a computer with
PictureProject installed via the supplied audio video/
USB cable, pressing d transfers only the pictures
marked with a E icon (c77). At the default set-
ting, all pictures are marked for transfer.
Pictures selected for transfer are recognized by the E icon (c7) in full-
frame playback, and by the P icon (c45) in 9-picture thumbnail playback
mode.
G Rotate Image
Record picture orientation information for playback
display.
Pictures can be rotated 90° clockwise or counter-
clockwise. 
Choose a file to be rotated in the picture selection
screen (c100) and select the direction to rotate
the chosen picture. Rotate the rotary multi selector clockwise (or press J) or
counterclockwise (or press I) in the rotate image screen. When [Record ori-
entation] (c116) is set to [Auto] (default setting), you can rotate (up to
180°) pictures taken in “tall” orientation by rotating the rotary multi selector
either clockwise or counterclockwise.
Press d to record the orientation for the picture as shown in the rotate
image screen.
All on
Mark all images for transfer.
All off
Remove transfer marking from all images.
Select Image(s)
Mark selected pictures for transfer in the picture selection screen (c100).
Transfer marking
All off
Exit All on
Select image(s)
Select image
Back
Rotate image
Back RotateRotate image
Back RotateRotate image
Back Rotate
Rotate 90° 
counterclockwiseRotate 90° 
clockwise
Downloaded From camera-usermanual.com Nikon Manuals 
						

							104
Playback Options: The Playback Menu
Shooting, Playback, and Setup Menus
L Copy
Copy pictures between the internal memory and a
memory card. 
First, select from the following options.
Then, select the desired copy option.
Choose [Selected images] (c100) to copy specific
pictures in the internal memory or memory card. To
copy all pictures, choose [All images].
jNotes on Copying Pictures
• If there is not enough space in the memory or on the memory card to receive the copy, an
error message will be displayed. Delete unwanted pictures or insert a new memory card (if
using a memory card) before trying again.
• The file format of images that can be copied is JPEG, MOV, or WAV.
• Pictures taken with another make of camera or that have been modified on a computer
cannot be copied.
k[Memory contains no images.] Message
If there are no pictures stored on the memory card when playback mode is applied, the mes-
sage, [Memory contains no images.], will be displayed. Press m to display the copy option
screen, and copy the pictures stored in the camera’s internal memory to the memory card.
kFile Names of Copied Pictures 
• When pictures are copied using the [Selected images] option, the newly copied pictures are
numbered consecutively from the largest number existing between the two memory sources.
Ex: when the last number in the source memory is 32 (DSCN0032.JPG) and the last num-
ber in the destination memory is 18 (DSCN0018.JPG), the copied pictures are assigned
numbers starting from DSCN0033.
• When pictures are copied using the [All images] option, all the pictures in the folder are
copied with the same file numbers. New folder numbers are assigned in ascending order
starting from the largest folder number available. If a new folder cannot be created, the
folder is not copied and an error message will be displayed.
kCopiesEdited copies have the same protection marking (c102) as the original but are not marked
for printing (c85) or transfer (c103).
MNO
Copy pictures from internal memory to memory card.
ONM
Copy pictures from memory card to internal memory.
Copy
Exit
Camera to card
All images
Exit Selected images
Downloaded From camera-usermanual.com Nikon Manuals 
						

							105
Shooting, Playback, and Setup Menus
Basic Camera Setup: The Setup Menu
The setup menu contains the following options.
RMenusc106
Choose how menus are displayed.
HQuick startupc107
Enable or disable welcome screen and start-up sound.
VWelcome screenc107
Select screen displayed when camera is turned on.
WDatec108
Set camera clock and choose home and destination time zones.
ZMonitor settingsc111
Adjust monitor brightness and choose display style.
fDate imprintc112
Imprint date or date counter on pictures.
bVibration reductionc114
Choose whether or not vibration reduction is enabled.
uAF assistc115
Enable or disable AF assist illumination.
hSound settingsc115
Adjust sound and volume settings.
IRecord orientationc116
Choose whether or not to record the orientation of a picture 
taken.
iAuto offc116
Set time before camera enters standby mode to save power.
M/OFormat memory/Format cardc117
Format internal memory or memory card.
jLanguagec118
Choose language for camera menus and messages.
kInterfacec118
Adjust settings for connection to television or computer.
nReset allc119
Restore camera settings to default values.
BFirmware versionc121
Display camera firmware version.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							106
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
Displaying the Setup Menu
First, display the playback-mode or shooting-mode selection menu by press-
ing C. Then select Z (use the rotary multi selector), press d.
• Use the rotary multi selector to choose and apply settings. (c9)
• To exit the setup menu, press C.
R Menus
Choose whether the initial menus displayed for the
shooting menu (c88), high-sensitivity menu
(c88), scene menu (c34), movie menu (c63),
one-touch portrait menu (c44), anti-shake menu
(c42), playback menu (c99), and setup menu
(displayed when m is pressed) (c105) use
[Text] (default setting) or [Icons].
When [Icons] is selected, all menu items can be displayed in a single page
and the highlighted menu name appears at the top of the monitor.
Set up
Menus
Quick startup
Welcome screen
Date
Monitor settingsSet up
Menus
Text
Icons
R
HVWZ
fbuh
I
iO kjn
B
MenusSet up
Menus
Quick startup
Welcome screen
Date
Monitor settings
[Text] [Icons]Menu names
Downloaded From camera-usermanual.com Nikon Manuals 
						

							107
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
H Quick Startup
Choose [On] (default setting) to disable the wel-
come screen and start-up sound. The camera will
be ready for shooting as soon as it is turned on.
Set to [Off] when enabling the welcome screen.
V Welcome Screen
You can select the welcome screen to be displayed
when the camera is turned on.
To set the welcome screen, [Quick startup] must be
set to [Off].
lWhen [Select an image] is Selected
If you have already selected a welcome screen picture, you can
select a new one by following the confirmation dialog.
Nikon
Displays a welcome screen when the camera is turned on.
Animation (default setting)
Displays a short animation when the camera is turned on.
Select an image
Select a picture in the internal memory or on the memory card for the wel-
come screen. Choose a picture in the picture selection screen (c100), and 
press d. 
The image used in the welcome screen is a copy of the selected picture and, 
therefore, is not affected if the original picture is deleted or the memory card 
is removed.
Pictures taken at an image mode setting of [16:9] (c89) can not be selected.
Quick startup
On
Off
Welcome screen
Nikon
Animation
Select an image
Welcome screen
Ye sNo Replace current
image?
Downloaded From camera-usermanual.com Nikon Manuals 
						

							108
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
W Date
Set the camera clock and choose home and travel
destination time zones.
Setting Travel Destination Time Zone
1Use the rotary multi selector to choose
[Time zone] and press d.
The time zone menu is displayed.
2Choose Y and press d.
The date and time displayed on the monitor changes
according to the region currently selected.
If daylight saving time is in effect, use the rotary multi
selector to choose [Daylight saving] and press d, and
then press G. The time is automatically advanced one
hour.
3Press J.
The new city time zone menu is displayed.
Date
Set camera clock to current date and time.
See “Setting Display Language, Date, and Time” (c16-17) for more informa-
tion.
Time zone
X (home time zone) can be specified and daylight saving enabled or disabled 
from [Time zone] options. When Y (destination time zone) is selected, the 
time difference (c110) is automatically calculated and the date and time in 
the selected region are recorded. Useful when travelling. 
Date
15/05/2007 15:30
Date
Time zone
Date
15/05/2007 15:30
Date
Time zone
Time zone
Tokyo, SeoulLondon,Casablanca
Daylight saving Daylight saving15/05/2007 15:30
Time zone
Tokyo, SeoulLondon,Casablanca
Daylight saving Daylight saving15/05/2007 23:30
Downloaded From camera-usermanual.com Nikon Manuals