Nikon Coolpix S3000 Users Manual

							119
Connecting to Televisions, Computers and Printers
Connecting to a Printer
Users of PictBridge-compatible (A166) printers can connect the camera directly 
to the printer and print pictures without using a computer. Follow the procedures 
below to print pictures.
BNotes on Power Source
•When connecting the camera to a printer, use a fully charged battery to prevent the camera from 
turning off unexpectedly.
•If the AC Adapter EH-62D (available separately) is used, COOLPIX S3000 can be powered from a 
home electrical outlet. Do not use any other make or model of AC adapter as they may cause the 
camera to heat up or malfunction.
DPrinting Pictures
In addition to printing pictures transferred to a computer and printing over a direct camera-to-
printer connection, the following options are also available for printing pictures:
•Inserting a memory card into a DPOF-compatible printer’s card slot
•Taking a memory card to a digital photo lab
For printing using these methods, specify the pictures and the number of prints each to the memory 
card using the Print set option in the playback menu (A87).
Take pictures
Select pictures for printing and 
number of copies using Print 
set option (A87)
Connect to printer (A120)
Print pictures one at a 
time (A121)Print multiple pictures (A122)
When printing is complete, turn the camera off and disconnect USB cable
Downloaded From camera-usermanual.com Nikon Manuals 
						

							120
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera to a Printer
1Turn off the camera.
2Turn on the printer.
Check printer settings.
3Connect the camera to the printer using the supplied USB cable.
4The camera is automatically turned on.
When properly connected, the PictBridge startup screen 
(
1) will be displayed in the camera monitor, followed by 
the Print selection screen (
2).
BConnecting the USB Cable
When connecting the USB cable, be sure that the connectors are properly oriented. Do not use force 
when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an 
angle.
BIf the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (A140) in the 
camera’s setup menu to Off, then connect the camera again.
Print selection
4 NO.    4 2010 15/05
12
Downloaded From camera-usermanual.com Nikon Manuals 
						

							121
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Printing Pictures One at a Time
After properly connecting the camera to the printer (A120), follow the 
procedure described below to print a picture.
1Use the multi selector to choose the desired 
picture and press the k button.
Rotate the zoom control to f (h) to switch to 12- 
thumbnail display, and to g (i) to switch back to full-
frame playback.
2Choose Copies and press the k button.
3Choose the number of copies (up to nine) and 
press the k button.
4Choose Paper size and press the k button.
5Choose the desired paper size and press the 
k button.
To specify paper size using printer settings, choose 
Default in the paper size menu.
Print selection
4 NO.    4 2010 15/05
Exit PictBridge
Paper size Copies Start print
Exit Copies
4
Exit PictBridge
Copies
Paper size Start print
Exit Paper size
Default
Postcard
100×150 mm
4×6 in. 5×7 in. 3.5×5 in.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							122
Connecting to a Printer
Connecting to Televisions, Computers and Printers
6Choose Start print and press the k button.
7Printing begins.
Monitor display returns to the print selection screen 
shown in step 1 when printing is complete.
To cancel printing before all copies have been printed, 
press the k button.
Printing Multiple Pictures
After properly connecting the camera to the printer (A120), follow the 
procedure described below to print multiple pictures.
1When the Print selection screen is displayed, 
press the d button.
The Print menu screen is displayed.
2Use the multi selector to choose Paper size 
and press the k button.
To exit the print menu, press the d button.
3Choose the desired paper size and press the 
k button.
To specify paper size using printer settings, choose 
Default in the paper size menu.
Exit PictBridge
Copies
Paper size Start print
Printing002 / 004
Cancel
PR
Current number of copies/
total number of prints
Exit Print menu
Print selection
DPOF printing
Paper size Print all images
Paper size
Default
3.5×5 in.
Postcard
100×150 mm
4×6 in. 5×7 in. 3.5×5 in.
Exit
Downloaded From camera-usermanual.com Nikon Manuals 
						

							123
Connecting to a Printer
Connecting to Televisions, Computers and Printers
4Choose Print selection, Print all images or 
DPOF printing and press the k button.
Print selection
Choose pictures (up to 99) and the number of 
copies (up to nine) of each.
•Press the multi selector J or K to select 
pictures, and press H or I to specify the 
number of copies for each.
•Picture selected for printing can be 
recognized by the check mark (y) and the 
numeral indicating the number of copies to 
be printed. If no copies have been specified 
for pictures, the selection is canceled.
•Rotate the zoom control to g (i) to switch to 
full-frame playback. 
Rotate the zoom control to f (h) to switch 
back to 12-thumbnail display.
•Press the k button when setting is complete.
•When the menu shown at right is displayed, 
choose Start print and press the k button 
to start printing. 
Choose Cancel and press the k button to 
return to the print menu.
Exit Print menu
Print selection
DPOF printing
Paper size Print all images
Back Print selection
111133
3
Exit Print selection
Start printprints
Cancel
003
Downloaded From camera-usermanual.com Nikon Manuals 
						

							124
Connecting to a Printer
Connecting to Televisions, Computers and Printers
5Printing begins.
Monitor display returns to the print menu (step 2) when 
printing is complete.
To cancel printing before all copies have been printed, 
press the k button.
CPaper size
The camera supports the following paper sizes: Default (the default paper size for the current 
printer), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4. Only sizes 
supported by the current printer will be displayed. To specify paper size using printer settings, 
choose Default in the paper size menu.
Print all images
One copy each of all pictures stored in the internal memory, or on the memory 
card, is printed.
•When the menu shown at right is displayed, 
choose Start print and press the k button 
to start print. Choose Cancel and press the k 
button to return to the print menu.
DPOF printing
Print pictures for which a print order was 
created using the Print set option (A87).
•When the menu shown at right is displayed, 
choose Start print and press the k button 
to start printing. Choose Cancel and press 
the k button to return to the print menu.
•To view the current print order, choose View 
images and press the k button. To print 
pictures, press the k button again.
Print all images
004
Exit Start printprints
Cancel
Exit DPOF printing
Start print
View images
Cancel
010prints
Back View images
10
002 / 010Printing
Cancel
PR
Current print/
total number of prints
Downloaded From camera-usermanual.com Nikon Manuals 
						

							125
Basic Camera Setup
Basic Camera Setup
Setup Menu
The setup menu contains the following options.
aMenusA127
Choose how menus are displayed.
cWelcome screenA128
Choose whether or not a welcome screen is displayed when the camera is turned 
on.
dDateA129
Set camera clock and choose home and destination time zones.
eMonitor settingsA132
Adjust photo information display, post-shooting image review, and monitor 
brightness settings.
fDate imprintA133
Imprint shooting date and time on pictures.
wElectronic VRA134
Choose whether to use electronic VR (vibration reduction) when taking still 
pictures.
UMotion detectionA135
Enable or disable motion detection, which reduces the effects of subject 
movement and camera shake in still pictures.
hAF assistA136
Enable or disable AF-assist illumination.
uDigital zoomA136
Enable or disable digital zoom.
iSound settingsA137
Adjust sound settings.
kAuto offA137
Set time before camera enters standby mode for saving power.
l/mFormat memory/Format cardA138
Format internal memory or memory card.
nLanguageA139
Choose the language used for camera monitor display.
oVideo modeA139
Adjust settings necessary for connection to television.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							126
Setup Menu
Basic Camera Setup
Displaying the Setup Menu
1Press the d button to display the menu 
screen.
If the d button was pressed in Scene mode, press the 
multi selector (A9) J to display the tabs.
2Press the multi selector (A9) J.
Tab selection is activated.
VCharge by computerA140
Choose whether or not to charge the camera battery when connecting to a 
computer via the USB cable.
dBlink warningA141
Specify whether or not the camera detects human subjects that have blinked with 
shooting using face priority.
pReset allA143
Restore camera settings to the default.
rFirmware versionA145
Display camera firmware version.
Exit Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Exit Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Downloaded From camera-usermanual.com Nikon Manuals 
						

							127
Setup Menu
Basic Camera Setup
3Press H or I to select the z tab.
4Press K or the k button.
The setup menu items can be selected.
Use the multi selector to choose items and adjust menu 
options (A9).
To exit the setup menu, press the d button or J to 
select a different tab.
a Menus
Choose the initial menus displayed.
d button M z (Setup menu) (A126) M a Menus
w Text (default setting)
Menus are displayed in list format.
x Icons
All menu items can be displayed in a single screen.
Exit Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Electronic VR
Exit Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Electronic VR
Exit Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Electronic VR
ExitMenus
Menu names
Downloaded From camera-usermanual.com Nikon Manuals 
						

							128
Setup Menu
Basic Camera Setup
c Welcome Screen
Choose whether or not a welcome screen is displayed when the camera is turned 
on.
d button M z (Setup menu) (A126) M c Welcome screen
None (default setting)
The camera enters shooting or playback mode without displaying the welcome 
screen.
COOLPIX
The camera displays a welcome screen and enters shooting or playback mode.
Select an image
Displays a picture selected for the welcome screen. When the picture selection 
screen is displayed, select a picture (A93) and press k button.
•As the selected picture is stored by the camera, it will be displayed when the 
camera is turned on even if the original picture is deleted.
•Pictures taken at an Image mode (A37) setting of P3968×2232, and copies 
created at a size of 320 × 240 or smaller using the small picture (A104) or crop 
(A105) function, cannot be used.
Downloaded From camera-usermanual.com Nikon Manuals