Nikon Camera D7100 Users Manual

263
U
Acquire reference data for the Image Dust Off option in Capture NX 2 (available 
separately; for more information, see the Capture NX 2 manual).
Image Dust Off ref photo is available only when a CPU lens is mounted on the 
camera.
 A lens with a focal length of at least 50 mm is recommended. When using a 
zoom lens, zoom all the way in.
1Choose a start option.
Highlight one of the following options and press 
J .
 To exit without acquiring Image Dust Off 
reference data, press  G.
• Start : The...

264
U
3Acquire dust off reference data.
Press the shutter-release button the rest of the way down to acquire Image Dust 
Off reference data.
 The monitor turns off when the shutter-release button is 
pressed.
 Note that noise reduction will be perf ormed if the subject is poorly lit, 
increasing recording times.
If the reference object is too bright or too dark, the camera 
may be unable to acquire Image Dust Off reference data 
and the message shown at right will be displayed.
 Choose 
another reference...

265
U
Change time zones, set the camera clock,  choose the date display order, and turn 
daylight saving time on or off ( 028).
Choose a language for camera menus and messages.
Photographs taken while  On is selected contain information on camera orientation, 
allowing them to be rotated automatically during playback ( 0185) or when viewed 
in ViewNX 2 (supplied) or in Capt ure NX 2 (available separately; 0309).
 The 
following orientations are recorded:
Camera orientation is not recorded when  Off is...

266
U
View information on the battery currently inserted in the 
camera.
Add a comment to new photographs as they are taken.
 Comments can be viewed as 
metadata in ViewNX 2 (supplied) or Capture NX 2 (available separately;  0309).
 The 
comment is also visible on the shooting da ta page in the photo information display 
( 0 190).
 The following options are available:
• Input comment : Input a comment as described on page 111.
 Comments can be 
up to 36 characters long.
• Attach comment : Select this...

267
U
Add copyright information to new photographs as they are taken. Copyright 
information is included in the shooting da ta shown in the photo information display 
( 0 190) and can be viewed as metadata in  ViewNX 2 (supplied) or in Capture NX 2 
(available separately;  0309).
 The following options are available:
• Artist : Enter a photographer name  as described on page 111.
 Photographer 
names can be up to 36 characters long.
• Copyright : Enter the name of the copyright holder as described on...

268
U
Select Save settings  to save the following settings to the memory card in Slot 1 
( 0 69; if the card is full, an error will be displayed).
 Use this option to share settings 
among D7100 cameras.
Settings saved using this model of camera can be restored by selecting  Load 
settings .
 Note that  Save/load settings  is only available when a memory card is 
inserted in the ca mera, and that the  Load settings option is only available if the card 
contains saved settings.
Save/Load SettingsG  button...

269
U
Display a virtual horizon based on information from the camera tilt sensor. If the 
camera is tilted neither left nor right, the roll reference line will turn green.
 Each 
division is equivalent to 5 °.
Virtual HorizonG  button ➜Bsetup menu
Camera level Camera tilted left or 
right
DTilting the Camera
The virtual horizon display is not accurate when the camera is tilted at a sharp angle forward 
or back. If the camera is unable to measure tilt, the amount of tilt will not be displayed.
ASee Also...

270
U
Fine-tune focus for up to 12 lens types. AF tuning is not recommended in most 
situations and may interfere with normal focus; use only when required. 
AF Fine-tuneG button ➜Bsetup menu
OptionDescription
AF fine-tune  (On/Off ) •
On : Turn AF tuning on.
• Off : Turn AF tuning off.
Saved value Tune AF for the current lens (CPU lenses only). 
Press 
1 or  3 to choose a value between +20 and 
–20. Values for up to 12 lens types can be stored. 
Only one value can be stored for each type of lens....

271
U
Choose whether the camera will establish wireless connections with smart devices 
when an optional WU-1a wireless mobile adapter (0310) is attached to the camera 
USB connector.
Wireless Mobile AdapterG  button ➜Bsetup menu
OptionDescription
Enable Enable wireless connections to smart devices running the Wireless Mobile 
Utility.
Disable Disable wireless connections to smart devices.
 Choose this option in 
locations where the use of wireless devices is prohibited.
 Selecting this 
option also...

272
U
This option is displayed only when an Eye-Fi memory card (available separately from 
third-party suppliers) is inserted in the camera.
 Choose Enable to upload 
photographs to a preselected destination (if two Eye-Fi cards are inserted, you can 
choose the card used for upload).
 Note that pictures will not be uploaded if signal 
strength is insufficient.
Observe all local laws concerning wireless devices and choose  Disable where 
wireless devices are prohibited.
When an Eye-Fi card is inserted,...