Nikon Camera Coolpix S33 Reference Manual

9
Preparing for Shooting
1With the battery installed, connect the camera to an 
electrical outlet.
If a plug adapter* is included with your camera, securely connect it to the 
Charging AC Adapter. Once the two are connected, attempting to forcibly 
remove the plug adapter could damage the product.
 * The shape of the plug adapter varies according to the country or region in 
which the camera was purchased. This step can be omitted if the plug 
adapter comes permanently bonded to the Charging AC Adapter....

10
Preparing for Shooting
BNotes About the USB Cable
•Do not use a USB cable other than the UC -E21. Using a USB cable other than the 
UC-E21 could result in overheat ing, fire or electric shock.
• Make sure that the plugs are properly oriented. Do not insert or remove the plugs 
at an angle when connecti ng or disconnecting them.
BNotes About Charging the Battery
•The camera can be operated while the battery is charging, but the charging time 
increases.
• If the battery level is extremely low, yo u may...

11
Preparing for Shooting
When the camera is turned on for the first time, the language-selection screen, 
and the date and time setting screen for the camera clock are displayed.
1Press the power switch to turn on 
the camera.
•The monitor turns on.
• To turn the camera off, press the power 
switch again.
2Use the multi 
selector  JK to 
select the 
desired 
language and 
press flexible 
button 4 ( O).
3Press flexible button 3 ( R 
Yes ).
4Use flexible button 2, 3, or  4 to select the date format.
Turn...

12
Preparing for Shooting
5Set the date and time, 
and press flexible button 
4 (O ).
•Use  JK  to select a field and 
then use  HI to set the date 
and time.
• Select the minute field and press 
the flexible button 4 ( O) to 
confirm the setting.
• Press flexible button 3 ( m) to display  m in the monitor and enable daylight 
saving time. To disable daylight sa ving time, press flexible button 3 (m) 
again.
6When the confirmation dialog is displayed, press flexible 
button 3 ( R Yes ).
7Use  JK  to...

13
Preparing for Shooting
9Confirm the message on 
the screen shown at right 
and press flexible button 
4 (O ).
•The shooting screen is displayed, and you 
can take pictures in  A Point and shoot.
• Battery level indicator
F : The battery level is high.
G : The battery level is low.
• Number of exposures remaining
 C  is displayed when no memory card is 
inserted in the came ra, and images are 
saved in the internal memory.
CChanging the Language, the Date and Time, or the Menu 
Background Setting
• You...

14
Basic Shooting and Playback Operations
Basic Shooting and Playback Operations
1Hold the camera steady.
•Keep fingers and other objects away from 
the lens, flash, AF-assist illuminator, 
microphone, and speaker.
2Frame the picture.
•Press the multi selector HI  to change the 
zoom lens position.
3Press the shutter-release button 
halfway.
• When the subject is in focus, the focus area 
or focus indicator is displayed in green.
• When you are using digital zoom, the 
camera focuses in the center of the...

15
Basic Shooting and Playback Operations
4Without lifting your finger, press 
the shutter-release button the rest 
of the way down.
BNotes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing 
the remaining recording time flashes while images or movies are being saved. Do 
not open the battery-chamber/memory card slot cover or remove the 
battery or memory card  while an indicator is flashing. Doing this could result in 
loss of data, or in...

16
Basic Shooting and Playback Operations
Using the Zoom
When you press the multi selector HI, the 
zoom lens position changes.
• To zoom in: Press H .
• To zoom out: Press  I.
When you turn the camera on, the zoom 
moves to the maximum wide-angle position.
• A zoom indicator is displayed on the 
shooting screen when the multi selector 
HI  is pressed.
• Digital zoom, which allows 
you to further magnify the 
subject up to approximately 
4× the maximum optical 
zoom ratio, can be activated 
by pressing H...

17
Basic Shooting and Playback Operations
1Press the c (shooting/playback 
mode) button to enter playback 
mode.
• If you press and hold down the  c button 
while the camera is tu rned off, the camera 
turns on in playback mode.
2Use the multi selector to select an image to display.
• Press and hold down  JK to scroll through 
the images quickly.
• To return to shooting mode, press the 
c button or shutter-release button.
• Press  H in full-frame playback 
mode to zoom in on an image.
• In full-frame...

18
Basic Shooting and Playback Operations
1Press flexible button 3 (n) 
to delete the image 
currently displayed in the 
monitor.
2Use flexible button 2, 3, or 
4 to select the desired 
deletion method.
• To exit without deleting, press 
flexible button 1 ( Q).
3Press flexible button 3 ( R 
Yes ).
•Deleted images cannot be 
recovered.
Delete Images
44
1 5 / 1 1 / 2 0 1 515/11/20151 5 : 3 015:30
Erase this picture only Erase
Erase selected pictures
Erase all pictures
Yes
No Erase 1 picture ?