Nikon Camera Coolpix Aw130 Reference Manual

							91
Using Menus
Autofocus Mode
Set how the camera focuses when shooting still images.
CAutofocus Mode for Movie Recording
Autofocus mode for movie recording can be set with Autofocus mode (A 105) in 
the movie menu.
Enter shooting mode M  A  (shooting mode) button M  A  (auto) mode 
M  k  button M  d  button M  Autofocus mode  M k  button
OptionDescription
A Single AF The camera focuses only when the shutter-release 
button is pressed halfway.
B Full-time AF The camera continues focusing even when the 
shutter-release button is not pressed halfway. The 
sound of lens drive movement is heard while the 
camera focuses.
a  Pre-focus
(default setting) Even when the shutter-rele
ase button is not pressed 
halfway, the camera focuses automatically if the 
composition of the framed image is significantly 
changed. 
						

							92
Using Menus
•See “Image Mode (Image Size and Quality)” ( A80) for information about 
Image mode .
Self-Collage
The Smart Portrait Menu
Enter shooting mode M  A  (shooting mode) button  M F  Smart portrait 
mode  M k  button M  d  button  M Self-Collage  M k  button
OptionDescription
Number of shots Set the number of shots that the camera 
automatically captures (number of captured 
images for an aggregated image).
•
4 (default setting) or  9 can be selected.
Interval Set the interval time between each shot.
•
Short , Medium  (default setting), or  Long can 
be selected.
Shutter sound Set whether to activate the shutter sound when 
shooting with the self-collage function.
•
Standard , SLR , Magic  (default setting), or Off 
can be selected.
• The same setting that is specified for  Shutter 
sound  in Sound settings  in the setup menu 
is not applied to this setting. 
						

							93
Using Menus
Blink Proof
BNotes About Blink Proof 
This function may not be available to use in combination with other functions 
( A 56).
Enter shooting mode M  A  (shooting mode) button  M F  Smart portrait 
mode  M k  button M  d  button  M Blink proof  M k  button
OptionDescription
y  On The camera automatically 
releases the shutter twice 
with every shot and saves 
one image in which the 
subject’s eyes are open.
•
If the camera saved an 
image in which the 
subject’s eyes may 
have been closed, the 
dialog shown on the right is displayed for a few seconds.
• The flash cannot be used.
Off (default setting) Turns the blink proof off.
A blink was detected in the
picture just taken. 
						

							94
Using Menus
•See “Editing Images (Still Images)” ( A64) for information about image 
editing functions.
Mark for Wi-Fi Upload
Select images in the camera that you want to transfer to a smart device in 
advance before transferring them.
On the image selection screen ( A99), select or deselect images for the  Mark 
for Wi-Fi upload  function.
Note that when you select  Reset all (A131) in the setup menu or  Restore 
default settings  (A108) in the Wi-Fi options menu, the  Mark for Wi-Fi 
upload  settings that you made are canceled.
The Playback Menu
Press the  c button (playback mode)  M d  button M  Mark for Wi-Fi 
upload M  k  button 
						

							95
Using Menus
Slide Show
Play back images one by one in an automated “slide show.” When movie files 
are played back in the slide show, only the first frame of each movie is 
displayed.
1Use the multi selector HI to 
select  Start and press the k  
button.
• The slide show begins.
• To change the interval between images, 
select  Frame intvl , press the k  button, 
and specify the desired interval time before 
selecting  Start.
• To repeat the slide show automatically, select  Loop and press the k  button 
before selecting  Start.
• The maximum playback time is up to about 30 minutes even if  Loop is 
enabled.
2End or restart the slide show.
• The screen shown on the right is displayed 
after the slide show ends or is paused. To 
exit the show, select  G and then press the 
k  button. To resume the slide show, select 
F  and then press the  k button.
Operations During Playback
• Use the multi selector  JK to display the previous/next image. Press and 
hold to rewind/fast forward.
• Press the  k button to pause or end the slide show.
Press the 
c button (playback mode)  M d  button M  Slide show M  k  
button
Slide show
Frame intvl Start Loop Pause Pause 
						

							96
Using Menus
Protect
The camera protects selected images from accidental deletion.
Select images to protect or cancel protection from the image selection screen 
(A 99).
Note that formatting the memory card or the camera’s internal memory 
permanently deletes all data including protected files ( A129).
Rotate Image
Specify the orientation in which saved images are displayed during playback. 
Still images can be rotated 90 degrees clockwise or 90 degrees 
counterclockwise. 
Select an image from the image selection screen ( A99). When the Rotate 
image screen is displayed, press the multi selector  JK to rotate the image 90 
degrees.
Press the  k button to finalize display orientation, and save orientation 
information with the image. Press the 
c button (playback mode)  M d  button M  Protect M k  
button
Press the  c button (playback mode)  M d  button M  Rotate image  M 
k  button
Rotate image
Back RotateRotate image
Back RotateRotate image
Back Rotate
Rotate 90 degrees 
counterclockwise Rotate 90 degrees 
clockwise 
						

							97
Using Menus
Copy (Copy Between the Memory Card and 
Internal Memory)
Images can be copied between a memory card and the internal memory.
•When a memory card that contains no images is inserted and the camera is 
switched to playback mode, Memory contains no images.  is displayed. In 
that case, press the  d button to select Copy .
1Use the multi selector HI  to 
select a destination option to 
which images are copied and 
press the k  button. 
2Select a copy option and press the 
k button.
•When you choose Selected images , use the 
image selection screen to specify images 
( A 99).
• When you choose the  Card to camera 
option,  All images  is not available.
BNotes About Copying Images
•Only files in formats that this camera can record can be copied.
• Operation is not guaranteed with images captured with another make of camera 
or that have been modified on a computer.
CCopying Images in a Sequence
•If you select a key picture of a sequence in  Selected images, all images in the 
sequence are copied.
• If you press the  d button while images in a sequence are displayed, only the 
Card to camera  copy option is available. All images in the sequence are copied if 
you select  Current sequence .
Press the c button (playback mode)  M d  button M  Copy M k  
button
Camera to card
Card to camera
Copy
Selected images
All images
Camera to card 
						

							98
Using Menus
Sequence Display Options
Select the method used to display images in the sequence (A62).
Settings are applied to all sequences, and the setting is saved in the camera’s 
memory even if the camera is turned off. Press the 
c button (playback mode) M  d  button M  Sequence display 
options  M k button
OptionDescription
Q  Individual pictures Displays each image in a sequence individually. 
F
is displayed on the playback screen.
C  Key picture only 
(default setting) Displays only the key picture for images in a 
sequence. 
						

							99
Using Menus
The Image Selection Screen
When an image selection screen such as the 
one shown on the right is displayed while 
operating the camera, follow the procedures 
described below to select the images.
1Use the multi selector JK to 
select an image.
• Move the zoom control ( A2) toward g (i ) 
to switch to full-frame playback or  f(h ) 
to switch to thumbnail playback.
• Only one image can be selected for  Rotate 
image . Proceed to step 3.
2Use HI  to select or deselect (or 
to specify the number of copies).
• When an image is selected, an icon is 
displayed below the image. Repeat steps 1 
and 2 to select additional images.
3Press the k  button to apply image selection.
•When a confirmation dialog is displayed, follow the on-screen instructions to 
operate.
Protect
Back
ProtectBack
Protect
Back 
						

							100
Using Menus
Movie Options
Select the desired movie option to record. Select normal speed movie options 
to record at normal speed, or HS movie options (A101) to record in slow or 
fast motion. The movie options that can be selected vary depending on the 
Frame rate setting ( A107).
• Memory cards with an SD Speed Class rating of 6 or faster are 
recommended for recording movies (A197).
Normal Speed Movie Options
* Interlaced format uses Fields per second.
The Movie Menu
Enter shooting mode M  d  button  M D  menu icon  M Movie options 
M  k  button
Option
(Image size/Frame  rate*, File format)Image sizeAspect ratio (horizontal to  vertical)
e 1080/30p
S  1080/25p
(default setting) 1920 × 1080 16:9
Z  1080/60i
U  1080/50i 1920 × 1080
16:9
f 720/30p
V  720/25p 1280 × 720
16:9
g  480/30p
W  480/25p 640 × 480
4:3