Home
>
Netgear
>
Router
>
Netgear Wndr4500v3 N900 Wifi Dual Band Gigabit Router Premium Edition User Manual
Netgear Wndr4500v3 N900 Wifi Dual Band Gigabit Router Premium Edition User Manual
Here you can view all the pages of manual Netgear Wndr4500v3 N900 Wifi Dual Band Gigabit Router Premium Edition User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 21
Specify Your Internet Settings 21 N900 WiFi Router Use the Internet Setup Wizard You can use the Setup Wizard to detect your Internet settings and automat\ ically set up your router. The Setup Wizard is not the same as the genie screens that display the f\ irst time you connect to your router to set it up. To use the Setup Wizard: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. T ype http://www.routerlogin.net or http://www.routerlogin.com . A...
Page 22
Specify Your Internet Settings 22 N900 WiFi Router Manually Set Up the Internet Connection You can view or change the router’s Internet connection settings. Specify an Internet Connection Without a Login To specify the Internet connection settings: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. T ype http://www.routerlogin.net or http://www.routerlogin.com . A login screen displays. 3. Enter the router user name and password. The user name is...
Page 23
Specify Your Internet Settings 23 N900 WiFi Router For the other sections in this screen, the default settings usually work, but you can change them. 8. Select an Internet IP Address radio button: •Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. •Use Static IP Address. Enter the IP address, IP subnet mask, and gateway IP address that your ISP assigned. The gateway is the ISP router to which your router connects. 9. Select a...
Page 24
Specify Your Internet Settings 24 N900 WiFi Router 5. For the Does your Internet connection require a login? setting, s elect the Ye s radio button. Scroll to view more settings 6. In the Internet Service Provider list, select the encapsulation method: PPPoE or L2TP. 7. In the Login field, enter the login name that your ISP gave you. This login name is often an email address. 8. In the Password field, type the password that you use to log in to your Internet servic\ e. 9. If your ISP requires...
Page 25
Specify Your Internet Settings 25 N900 WiFi Router •Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also. 14. Select a Router MAC Address radio button: •Use Default Address. Use the default MAC address. •Use Computer MAC Address. The router captures and uses the MAC address of the computer that you are now using. You must use the one...
Page 26
Specify Your Internet Settings 26 N900 WiFi Router -Use Auto Config for an IPv6 Internet Connection on page 28 -Set Up an IPv6 6rd Tunnel Internet Connection on page 29 -Set Up an IPv6 6to4 Tunnel Internet Connection on page 30 -Set Up an IPv6 Pass Through Internet Connection on page 32 -Set Up an IPv6 Fixed Internet Connection on page 32 -Set Up an IPv6 DHCP Internet Connection on page 34 -Set Up an IPv6 PPPoE Internet Connection on page 35 6. Click the Apply button. Your changes take effect....
Page 27
Specify Your Internet Settings 27 N900 WiFi Router 5. In the Internet Connection Type list, select Auto Detect . The router automatically detects the information in the following fields\ : • Connection T ype. This field indicates the connection type that is detected. • Router ’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router’s WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_)...
Page 28
Specify Your Internet Settings 28 N900 WiFi Router Use Auto Config for an IPv6 Internet Connection To set up an IPv6 Internet connection through auto configuration: 1. Launch a web browser from a computer or wireless device that is connecte\ d to the network. 2. T ype http://www.routerlogin.net or http://www.routerlogin.com . A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password . The user name and password are...
Page 29
Specify Your Internet Settings 29 N900 WiFi Router 7. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name. You can type the domain name of your IPv6 ISP. Do not enter the domain name for the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field. For example, Earthlink Cable might require a host name of home, and Comcast sometimes supplies a domain name. 8....
Page 30
Specify Your Internet Settings 30 N900 WiFi Router A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password . The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADV ANCED > Advanced Setup > IPv6. The IPv6 screen displays. 5. In the Internet Connection T ype list, select 6rd Tunnel. The router detects the service provider’s IPv4 network and attempts to establish an IPv6 6rd Tunnel...