Netgear Wndr4300v2 N750 Wifi Dual Band Gigabit Router Premium Edition User Manual

Specify Your Internet Settings 31
 N750 WiFi Router
The user name is 
admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > IPv6 .
The IPv6 screen displays.
5.  In the Internet Connection T
 ype list, select 6to4 Tunnel.
The router automatically detects the information in the  Router’s IPv6 Address on LAN 
field. This field shows the IPv6 address that is acquired for the router’s LAN interface....

Specify Your Internet Settings 
32 N750 WiFi Router 
Your settings are saved.
Set Up an IPv6 Pass Through Internet Connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and 
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or...

Specify Your Internet Settings 33
 N750 WiFi Router
5. 
In the Internet Connection Type  list, select Fixed.
6. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix 
 Length. The IPv6 address and prefix length of the router WAN 
interface.
• Default IPv6 Gateway . 
 The IPv6 address of the default IPv6 gateway for the router’s 
WAN interface.
• Primary DNS Server . 
 The primary DNS server that resolves IPv6 domain name 
records for the router.
• Secondary DNS Server . 
 The...

Specify Your Internet Settings 34
N750 WiFi Router 
Set Up an IPv6 DHCP Internet Connection
To set up an IPv6 Internet connection with a DHCP server:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC...

Specify Your Internet Settings 
35  N750 WiFi Router
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the 
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz 
as the domain name. If your ISP provided a domain name, type it in this field. For 
example, Earthlink Cable might require a host name of home, and Comcast sometimes 
supplies a domain name.
8. Select  an  IP Address Assignment  radio  button:
•Use DHCP Server. This method...

Specify Your Internet Settings 36
N750 WiFi Router 
5. 
In the Internet Connection Type list, select PPPoE.
6. Enter the settings that your service provider gave you.
If your service provider gave you only one user name and password, the s\
ervice provider 
most likely supports dual stack PPPoE (a single ppp session). If the s\
ervice provider gave 
you two user names and passwords for IPv4 and IPv6, then the router must\
 use dif

ferent 
PPP session. 
• T
o use separate PPP sessions (the default...

Specify Your Internet Settings 
37  N750 WiFi Router
Note:The default setting of the Connection Mode list is Always On to 
provide a steady IPv6 connection. The router never terminates the 
connection. If the connection is terminated, for example, when the 
modem is turned off, the router attempts to reestablish the connection 
immediately after the PPPoE connection becomes available again.
10. To specify domain name server addresses, select the Use These DNS Servers radio button 
and complete the...

Specify Your Internet Settings 38
N750 WiFi Router 
Note:
An incorrect MTU setting can cause Internet communication 
problems. For example, you might not be able to access certain 
websites, frames within websites, secure login pages, or FTP or POP 
servers.
To change the MTU size:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name...

Specify Your Internet Settings 39
 N750 WiFi Router
until the problem goes away. The following table describes common MTU sizes and 
applications. 
Table 2.  Common MTU sizes 
 
MTUApplication
1500 The largest Ethernet packet size. This setting is typical for connections that do not use 
PPPoE or VPN and is the default value for NETGEAR routers, adapters, and\
 switches.
1492 Used in PPPoE environments.
1472 Maximum size to use for pinging. (Larger packets are fragmented.)
1468 Used in some DHCP...

40
4
4.   Optimize Performance
You can set up the router to optimize performance for applications such as Internet gaming, 
high-definition video streaming, and VoIP communication. By default, the router uses Wi-Fi 
Multimedia Quality of Service (WMM QoS).
This chapter contains the following sections:
•Optimize Internet Gaming with Upstream QoS 
•Add QoS Rules by Service 
•Improve Network Connections with Universal Plug and Play 
•Wi-Fi Multimedia Quality of Service