Netgear Wna1000mv2 G54 N150 Wifi Usb Micro Adapter Installation Guide

							G54/N150 WiFi USB Micro Adapter
Model WNA1000Mv2
2. Click the Setup button .
The Software Update Check screen displays. 
3.  Install the setup software.
You have two options:
•	Connected to the Internet. If you are connected to the Internet, 
click the Check for Updates button. After the software checks 
for updates, the Update Check Complete screen displays. Click the 
Continue button. The Welcome screen displays.
•	 Not connected to the Internet. If you are not connected to the 
Internet, click the Install from CD button. The Welcome screen 
displays.
4.  To accept the license agreement, select the I agree radio button and 
click the Next  button.
A message displays asking you to wait while software is installed. After a 
few minutes, NETGEAR genie prompts you to insert your adapter.
5.  Inset the adapter into a USB port on your computer. 6. 
Return to the NETGEAR genie screen and click the Next  button.
NETGEAR genie displays a list of wireless networks in your area.
Standalone Driver Installation
1.  Insert the resource CD in your computer CD drive.
Note:  If your computer does not have a CD drive, download the 
WNA1000Mv2 resource CD driver by visiting http://support.netgear.com. 
Click the Support For Home button and enter WNA1000Mv2 in the 
search field.
If the Resource CD screen does not display, browse the files on the CD and 
double-click Autorun.exe.
The NETGEAR Resource CD screen displays.
2.  Click the Install Windows Standalone Driver button 
.
The driver installs on your computer.
3.  When prompted, insert the adapter into a USB port on your computer.
Package Contents
Installation
1. Insert the resource CD in your computer CD drive. 
Note:  If your computer does not have a CD drive, download the 
WNA1000Mv2 resource CD driver by visiting http://support.netgear.
com . Click the Support For Home button and enter WNA1000Mv2 in 
the search field.
If the Resource CD screen does not display, browse the files on the CD 
and double-click Autorun.exe.
The NETGEAR Resource CD screen displays.
Adapter Resource CD
Quick Start        
						

							August 2014
Join a Wireless Network
You can join a wireless network from NETGEAR genie, or you can use Wi-Fi 
Protected Setup (WPS) if your wireless router supports it.
Join a Network Using NETGEAR genie
1. Insert the adapter into a USB port on your computer.
2.  Click the NETGEAR genie icon 
 that displays on the Windows 
systems tray or on the desktop.
The NETGEAR genie Home screen displays.
3.  Click the Join a Network button.
4.  Select your wireless network.
5.  Click the Connect button.
6.  If the network is secure, enter its password or network key.
The adapter joins the network, which can take a few minutes. Your 
settings are saved in a profile.
Join a Network Using WPS
1. Press and hold the WPS button on the adapter for two seconds.
2. Within two minutes, press the WPS button on your wireless router or 
gateway.
The adapter joins the network, which can take a few minutes. Your 
settings are saved in a profile.
Check Your Connection Status
When you install your adapter, the NETGEAR genie icon displays in the 
Windows system tray and on the desktop. You can double-click this icon 
to open NETGEAR genie to make changes or connect to a different wireless 
network. The color of the icon indicates the strength of your wireless 
connection:
 White. Strong connection
 Yellow. Weak connection
 Red . No connection
If you remove your adapter, NETGEAR genie is not available, so the icon 
does not display. When you insert the adapter again, the icon returns.
Support
Thank you for purchasing this NETGEAR product. 
After installing your device, locate the serial number on the label of your 
product and use it to register your product at https://my.netgear.com. 
You must register your product before you can use NETGEAR telephone 
support. NETGEAR recommends registering your product through the NETGEAR 
website. 
For product updates and web support, visit http://support.netgear.com. 
NETGEAR recommends that you use only the official NETGEAR support 
resources. 
You can get the user manual online at http://downloadcenter.netgear.com or 
through a link in the product’s user interface.
For the complete EU Declaration of Conformity, visit 
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit  
http://www.netgear.com/about/regulatory/. 
See the regulatory compliance document before connecting the power supply.
WPS button
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USANETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered 
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. 
Information is subject to change without notice.