Netgear Wn2000rptv3 Universal Wifi Range Extender User Manual

							Extender Network Settings 21
 N300
 WiF  Range Extender
6. In each Network Name (SSID)  field, type a network name.
7.  Click the  SA
 VE button.
Your settings are saved.
Turn Off the SSID Broadcast to Create a Hidden Network
By default, the extender broadcasts its WiFi signal so that its wireless\
 network names 
(SSIDs) are easy for you to find and connect to from your computer, tablet, or smartphone. 
You can turn off the SSID broadcast to create a hidden WiFi network. To connect to a hidden  network you must know its SSID and password and manually enter them.
To turn off the SSID broadcast to create a hidden network:
1.  On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net. 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays.
5.  Select  Settings > W
 iFi.
6. Clear the Broadcast the Network name (SSID)  check box.
7.  Click the  SA
 VE button.
Your settings are saved. 
						

							Extender Network Settings 22
N300
 WiF
 Range Extender 
Disable or Enable the WiFi Radio
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz band. If you disable 
the WiFi radios, then no one can connect with WiFi to the extender. 
To disable or enable the WiFi radios:
1. On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net . 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays.
5.  Select  Settings > W
 iFi.
6. Select or clear the Enable 2.4 GHz WiFi check box.
7.  Click the  SA
 VE button.
Your settings are saved.
Change the WiFi Speed
To change the WiFi speed:
1.  On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net . 
3.  When prompted, enter your email address and password. 
						

							Extender Network Settings 23
 N300
 WiF  Range Extender
4. Click the  Menu icon .
The extender menu displays.
5.  Select  Settings > W
 iFi.
6. In each WiFi Speed  menu, select a speed.
7.  Click the  SA
 VE button.
Your settings are saved.
Customize the Extender’s WiFi Coverage Area
By default, the extender uses its maximum WiFi coverage area. You can select a smaller 
coverage area, which uses less electrical power.
To customize the extender’s WiFi coverage area:
1.  On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net. 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays. 
						

							Extender Network Settings 24
N300
 WiF
 Range Extender 
5. Select  Do More > WiFi Coverage .
6. Select a radio button for the output power.
7.  Click the  SA
 VE button.
Your settings are saved.
Use WPS to Add a Computer to the Extender’s WiFi 
Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device \
to the extender’s 
network without entering the WiFi network passphrase or key. Instead, you use a  WPS button 
or enter a PIN to connect.
If you use the button method, the WiFi device that you are trying to con\
nect must include a 
physical push button or a software button. If you use the PIN method, yo\
u must know the PIN 
of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi 
security is set), connecting with WPS automatically sets WP
 A + WPA2 WiFi security on the 
extender network and generates a random passphrase. You can view this passphrase on the 
WiFi Settings page (for more information, see View WiFi Settings  on page
  19).
For information about using WPS to connect the extender to a WiFi networ\
k during setup, 
see Use the Extender in Access Point Mode  on page
  14.
Use WPS with the Push Button Method
For you to use the push button method to connect a WiFi device to the ex\
tender’s WiFi 
network, the WiFi device that you are trying to connect must include a p\
hysical WPS button 
or an onscreen WPS button that you can click.
To use WPS to add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net . 
3.  When prompted, enter your email address and password. 
						

							Extender Network Settings 25
 N300
 WiF  Range Extender
4. Click the  Menu icon .
The extender menu displays.
5.  Select  Settings > Do More > Connect Devices (WPS).
6. Leave the  Push Button (recommended)  radio button selected.
7.  Click the  WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the computer or WiFi devic\
e to its WiFi 
network. 
8.  Within two minutes, go to the computer WiFi device and press or click it\
s  WPS button.
9.  T
o verify that the WiFi device is connected to the extender’s  WiFi network, select 
Settings > Connected Devices.
The WiFi device displays onscreen.
Use WPS with the PIN Method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must  know the PIN of the WiFi device that you are trying to connect.
To add a computer or WiFi device to the extender’s WiFi network:
1.  On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net. 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays.
5.  Select  Settings > Do More > Connect Devices (WPS). 
The Connect Devices (WPS) page displays. 
						

							Extender Network Settings 26
N300
 WiF
 Range Extender 
6. Select the  PIN Number  radio button.
7. Type the PIN of the WiFi device in the field.
8.  Click the  NEXT button.
For four minutes, the extender attempts to find the computer or WiFi dev\
ice.
9.  Within four minutes, go to the WiFi device and use its WPS software to j\
oin the WiFi 
network.
10.  T
o verify that the WiFi device is connected to the extender’s  WiFi network, select  
Settings > Connected Devices.
The WiFi device displays onscreen.
Deny Access to a Computer or WiFi Device
By default, access control is disabled so that it is easy for you to con\
nect to the extender’s 
WiFi networks.
You can deny network access to specific computers and WiFi devices based \
on their MAC  addresses. Each network device is assigned a MAC address, which is a uni\
que 12-character 
physical address, containing the hexadecimal characters 0–9, a–f, \
or 

A–F only, and 
separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the 
label of the WiFi device. If you cannot access the label, you can displa\
y the MAC address 
using the network configuration utilities of the computer. You might also find the MAC 
addresses on the Connected Devices page (see  View Connected Devices on page
  19).
To use WiFi access control to deny access:
1. On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net . 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays. 
						

							Extender Network Settings 27
 N300
 WiF  Range Extender
5. Select  Settings > Connected Devices .
6. In the WiFi Devices section, select the  Enable Access Control check box.
The WiFi devices table displays the names and MAC addresses of WiFi devi\
ces that are  connected to the extender.
7.  Select the Deny check box for the device.
8.  Click the  SA
 VE button.
Your settings are saved and that device cannot connect to the extender’s WiFi network.
Set Up an Access Schedule
You can control access to all users during specific periods of the day. You can set up an  access schedule that prevents Internet access through the extender netwo\
rk based on the 
times that you set.
To set up an access schedule:
1.  On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net. 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays. 
						

							Extender Network Settings 28
N300
 WiF
 Range Extender 
5. Select  Do More > Access Schedule .
6. Select the Access Schedule On radio button.
The page adjusts.
7.  In the Days menu and the T
 ime menu, select the days and time when you want to disable 
Internet access.
8.  Click the  Add T
 ime button to add the time that you specified to the Scheduled Times table.
9.  Click the  SA
 VE button.
Your settings are saved.
Set Up the Extender to Use a Static IP Address
The extender comes set up to use a dynamic IP address, which is the corr\
ect setting for most  home networks. 
To set up the extender to use a static IP address:
1.  On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net . 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays.
5.  Select  Settings > W
 iFi Settings.
The WiFi Settings page displays. 
						

							Extender Network Settings 29
 N300
 WiF  Range Extender
6. Scroll down and click the  IP Address heading to expand the IP address settings.
By default, the  Dynamically get IP 
 Address from Router radio button is selected.
7.  Select the Use Static IP 
 Address radio button.
8.  Complete the fields to specify the IP network IP addresses.
9.  Click the  SA
 VE button.
Your settings are saved.
Specify WPS Settings
Wi-Fi Protected Setup (WPS) lets you connect devices to the WiFi netwo\
rk without typing the 
WiFi password.
To specify WPS settings:
1.  On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net. 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays.
5.  Select  Settings > W
 iFi Settings.
The WiFi Settings page displays. 
						

							Extender Network Settings 30
N300
 WiF
 Range Extender 
6. Scroll down and click the  WPS heading to expand the WPS settings.
In most situations, the default settings work fine, but you can change t\
hem:
• Enable WPS PIN. When this check box is selected, you can use a PIN to connect to 
the extender WiFi network with WPS. 
If someone enters the wrong PIN multiple times when attempting to connec\
t with 
WPS, this check box is automatically cleared.
• Auto disable the PIN after 3 failed PIN entries, to prevent PIN compromi\
se . This 
setting specifies the number of times the wrong PIN can be entered befor\
e WPS PIN 
access is automatically disabled to protect your WiFi network from unaut\
horized 
access.
• Keep existing W
 iFi settings for 2.4 GHz network . This setting means that the name 
of the WiFi network remains the same when WPS is used. If you clear this\
 check box 
each time you use WPS to connect, the extender WiFi network name is repl\
aced with 
a new, randomly generated WiFi network name.
7.  T
o save changes, click the SAVE button.
Your settings are saved.