Home > Netgear > Router > Netgear Router WGT624 V2 User Manual

Netgear Router WGT624 V2 User Manual

Here you can view all the pages of manual Netgear Router WGT624 V2 User Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 111

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network C-5
M-10153-01
Verify the following settings as shown: 
• Client for Microsoft Network exists
• Ethernet adapter is present
• TCP/IP is present
•Primary Network Logon is set to 
Windows logon
Click on the Properties button. The 
following TCP/IP Properties window will 
display.  

Page 112

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-6 Preparing Your Network
M-10153-01
Selecting Windows’ Internet Access Method
1.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2.Double-click the Internet Options icon.
3.Select “I want to set up my Internet connection manually” or “I want to connect through a 
Local Area Network” and click Next.
4.Select “I want to connect through a Local Area Network” and click Next.
5.Uncheck all...

Page 113

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network C-7
M-10153-01
2.Ty p e  winipcfg, and then click OK.
The IP Configuration window opens, which lists (among other things), your IP address, subnet 
mask, and default gateway.
3.From the drop-down box, select your Ethernet adapter.
The window is updated to show your settings, which should match the values below if you are 
using the default TCP/IP settings that NETGEAR recommends for connecting through a 
router or...

Page 114

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-8 Preparing Your Network
M-10153-01
DHCP Configuration of TCP/IP in Windows XP, 2000, or NT4
You will find there are many similarities in the procedures for different Windows systems when 
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of 
Windows.
DHCP Configuration of TCP/IP in Windows XP 
Locate your Network Neighborhood icon.
• Select Control Panel...

Page 115

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network C-9
M-10153-01
• Now you should be at the Local Area 
Network Connection Status window. This 
box displays the connection status, duration, 
speed, and activity statistics.
• Administrator logon access rights are needed 
to use this window.
• Click the Properties button to view details 
about the connection.
• The TCP/IP details are presented on the 
Support tab page.
• Select Internet Protocol, and click...

Page 116

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-10 Preparing Your Network
M-10153-01
DHCP Configuration of TCP/IP in Windows 2000 
Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.  
TCP/IP should be added by default and set to DHCP without your having to configure it.  
However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows 
2000.• Verify that the Obtain an IP address 
automatically radio button is...

Page 117

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network C-11
M-10153-01
• Click on the My Network Places icon on the Windows desktop.  This will bring up a window 
called Network and Dial-up Connections.
• Right click on Local Area Connection and select Properties. 
•The Local Area Connection Properties 
dialog box appears. 
• Verify that you have the correct Ethernet 
card selected in the Connect using: box.
• Verify that at least the following two items 
are...

Page 118

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-12 Preparing Your Network
M-10153-01
• With Internet Protocol (TCP/IP) selected, 
click on Properties to open the Internet 
Protocol (TCP/IP) Properties dialogue box.
• Verify that 
•Obtain an IP address automatically is 
selected.
•Obtain DNS server address 
automatically is selected.
• Click OK to return to Local Area 
Connection Properties.
• Click OK again to complete the 
configuration process for Windows 2000.
Restart the PC....

Page 119

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network C-13
M-10153-01
DHCP Configuration of TCP/IP in Windows NT4
Once you have installed the network card, you need to configure the TCP/IP environment for 
Windows NT 4.0. Follow this procedure to configure TCP/IP with DHCP in Windows NT 4.0.
• Choose Settings from the Start Menu, and then select Control Panel. 
This will display Control Panel window. 
• Double-click the Network icon in the 
Control Panel window....

Page 120

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
C-14 Preparing Your Network
M-10153-01
• Highlight the TCP/IP Protocol in the 
Network Protocols box, and click on the 
Properties button. 
Start reading Netgear Router WGT624 V2 User Manual

Related Manuals for Netgear Router WGT624 V2 User Manual

All Netgear manuals