Home
>
Netgear
>
NAS Systems
>
Netgear Readynas 524x Premium Performance Data Storage 4 Bay Hardware Manual
Netgear Readynas 524x Premium Performance Data Storage 4 Bay Hardware Manual
Here you can view all the pages of manual Netgear Readynas 524x Premium Performance Data Storage 4 Bay Hardware Manual. The Netgear manuals for NAS Systems are available online for free. You can easily download all the documents as PDF.
Page 31
Figure 8. ReadyNAS 202 drive bays 1.Drive bay door 2.Disk tray handle 3.Recessed disk tray handle lock 4.Disk tray release latch 5.Drive bays Rear Panel The following figure shows the rear panel of the ReadyNAS 202. NETGEAR ReadyNAS 202 31 ReadyNAS OS 6.5
Page 32
Figure 9. ReadyNAS 202 rear panel 1.Exhaust fan 2.Kensington lock 3.USB 3.0 ports 4.eSATA port 5.GbE ports with LED status indicators The two GbE ports are equivalent.They can be used as two separate Ethernet connections, or can be configured as a single, bonded port with a 2 Gbps potential speed. For information on how to configure a bonded port, and the network configuration requirements needed to support 2 Gbps, see the ReadyNAS OS 6 Software Manual, which is available at...
Page 33
Table 3. ReadyNAS 202 indicator descriptions DescriptionIndicator Press this button to turn on the ReadyNAS.The LED has these states: •On. Powered on. •Blinking. Booting or shutting down. •Off. Powered off. Power button and LED Each drive bay has an LED associated with it on the front panel of the storage system.The disk LEDs have these states: •On. Power is on and the disk is operating normally. •Blinking.The disk was removed, failed, or is resynchronizing. See the display screen for details. •Off.The...
Page 34
Power On To power on the system: 1.Connect the system to a power supply. Depending on the system's last power state, the system might power on automatically. For more information, see Power State on page 34. Note 2.If necessary, press the Power button. The system powers on. Preferred Shutdown You can gracefully shut down your system by using the Power button or the ReadyNAS local admin page. For information about how to gracefully shut down your system using the ReadyNAS local admin page, see the...
Page 35
Boot Menu Use the boot menu to restart or troubleshoot your ReadyNAS storage system.Your storage system has the following boot modes: •Normal. Initiates a normal boot process, just like booting using the Power button. •Factory default. Initiates a short disk test that takes approximately 5 minutes. After the disk test, a 10-minute time-out period begins. WARNING: The factory default reboot process resets the storage system to factory settings, erases all data, resets all defaults, and reformats the disk...
Page 36
(Continued) Backup LEDDisk 2 LEDDisk 1 LEDPower LEDMemory Test State OffBlinkingOffOn6th hour OffOffBlinkingOn7th hour BlinkingBlinkingBlinkingOn8th hour BlinkingBlinkingBlinkingBlinkingResult: fail OnOnOnOnResult: pass •Test disk. Performs an offline full disk test.This process can take four hours or more, depending on the size of your disks. Any problems are reported in the system logs. For more information about viewing the system logs, see the ReadyNAS OS 6 Software Manual, which is available at...
Page 37
(Continued) Status IndicatorBoot Mode USB and Backup LED Disk 2 LED Disk 1 LED Power LED Description Power LED and disk 2 LED light.Memory test Power LED and USB and backup status LED light. Test disk Legend: •On: •Off: 6.Press and release the Reset button to confirm your boot menu selection. The system boots in the selected boot mode. NETGEAR ReadyNAS 202 37 ReadyNAS OS 6.5
Page 38
5 NETGEAR ReadyNAS 204 This chapter provides an overview of the physical features of the ReadyNAS 204 and includes the following sections: •Front and Side Panels on page 39 •Drive Bays on page 39 •Rear Panel on page 40 •Status Information on page 41 •Power On and Shut Down on page 42 •Boot Menu on page 44 38
Page 39
Front and Side Panels The following figure shows the front and side panels of the ReadyNAS 204. Figure 11. ReadyNAS 204 front and side panels 1.Exhaust vents 2.USB 2.0 port 3.Backup button and LED 4.Disk LEDs 5.Disk activity LED 6.Power button and LED 7.Drive bay door 8.Status display screen Drive Bays The following figure shows the drive bays of the ReadyNAS 204. NETGEAR ReadyNAS 204 39 ReadyNAS OS 6.5
Page 40
Figure 12. ReadyNAS 204 drive bays 1.Drive bay door 2.Disk tray handle 3.Recessed disk tray handle lock 4.Disk tray release latch 5.Drive bays Rear Panel The following figure shows the rear panel of the ReadyNAS 204. NETGEAR ReadyNAS 204 40 ReadyNAS OS 6.5