Netgear R7000p Nighthawk Smart Wifi Router With Mu Mimo User Manual

							Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and
hold the Reset button on the back of the router for at least seven seconds.The router resets and returns
to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Default SettingFeature
www.routerlogin.com or www.routerlogin.netUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet
connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.1LAN IPLocal network
(LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
Pacific time for NA
GMT for WW
Time zone
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
DisabledTime adjusted for daylight saving
time
DisabledSNMP
Disabled (except traffic on port 80, the HTTP port)Inbound (communications coming
in from the Internet)
Firewall
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
Supplemental Information
151
Nighthawk AC2300 Smart WiFi Router 
						

							Table 3. Factory default settings (Continued)
Default SettingFeature
EnabledWireless communicationWireless
See router label.SSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto1Transmission speed
United States in the US; otherwise, varies by regionCountry/region
Auto for 2.4 GHz, CH 44 for WW SKU, and CH 153 for
North America SKU
RF channel
Up to 600 Mbps at 2.4GHz
Up to 1625 Mbps at 5 GHz
Operating mode
1Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Technical Specifications
Table 4. Router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and
SMB
Data and routing protocols
•North America: 100V, 50/60 Hz input
•UK, Australia: 220V, 50/60 Hz, input
•Europe: 100–240V, 50/60 Hz input
•All regions (output): 12V, 3.5 A DC output
Power adapter
11.23 x 7.26 x 1.97 in. (286 x 185 x 50 mm)Dimensions
1.65 lb (752 g)Weight
0° to 40°C  (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
Supplemental Information
152
Nighthawk AC2300 Smart WiFi Router 
						

							Table 4. Router specifications (Continued)
DescriptionFeature
FCC Part 15 Class B
EN 55022 (CISPR 22), Class B C-Tick N10947
Electromagnetic emissions
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45LAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45WAN
Maximum WiFi signal rate complies with the IEEE 802.11 standard.2Wireless
Auto Rate SensingRadio data rates
•IEEE® 802.11b/g/n 2.4 GHz 256 QAM support
•IEEE 802.11a/n/ac 5.0 GHz 1024 QAM support
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node (typically
50–70 nodes).
Maximum computers per
wireless network
2.4 GHz
•2.412–2.462 GHz (US)
•2.412–2.472 GHz (Europe ETSI)
5 GHz
•5.18–5.24 + 5.745–5.825 GHz (US)
•5.18–5.24 GHz (Europe ETSI)
Operating frequency range
WPA2-PSK and WPA and WPA2802.11 security
2Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Supplemental Information
153
Nighthawk AC2300 Smart WiFi Router