Netgear R6400 Ac1750 Smart Wifi Router 802 11ac Dual Band Gigabit User Manual

							Specify Your Internet Settings 
31  AC1750 Smart WiFi Router
•Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
•Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN). 
10. (Optional) Select the Use This Interface ID check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
11. Click the Apply button.
Your settings are saved.
Set Up an IPv6 6rd Tunnel Internet Connection
6rd protocol makes it possible to deploy IPv6 to sites using a service providers IPv4 network. 
6rd uses the service provider’s own IPv6 address prefix. This limits the operational domain of 
6rd to the service provider’s network and is under direct control of the service provider. The 
IPv6 service provided is equivalent to native IPv6.
The 6rd mechanism relies upon an algorithmic mapping between the IPv6 and IPv4 
addresses that are assigned for use within the service provider’s network. This mapping 
allows for automatic determination of IPv4 tunnel endpoints from IPv6 prefixes, allowing 
stateless operation of 6rd.
With a 6rd tunnel configuration, the router follows the RFC5969 standard, supporting two 
ways to establish a 6rd tunnel IPv6 WAN connection: 
•Auto Mode. In IPv6 Auto Detect mode, when the router receives option 212 from the 
DHCPv4 option, auto detect selects the IPv6 as 6rd Tunnel setting. The router uses the 
6rd option information to establish the 6rd connection. 
•Manual Mode. Select 6rd tunnel. If the router receives option 212, the fields are 
automatically completed. Otherwise, you must enter the 6rd settings. 
To set up an IPv6 6rd tunnel Internet connection:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6. 
						

							Specify Your Internet Settings 32
AC1750
 Smart  WiFi Router 
The IPv6 page displays.
5.  In the Internet Connection T
 ype menu, select 6rd Tunnel.
The router automatically detects the information in the following sectio\
ns:
• 6rd (IPv6 Rapid Development) Configuration. 
 The router detects the service 
provider’s IPv4 network and attempts to establish an IPv6 6rd tunnel connection. \
If 
the IPv4 network returns 6rd parameters to the router, the page adjusts to display the 
correct settings in this section.
• Router
’s IPv6 Address on LAN . This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. I\
f no address is 
acquired, the field displays Not Available.
• MTU size (in bytes). 
 The normal MTU (maximum transmit unit) value for most 
Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. Ch\
ange the 
MTU only if you are sure that it is necessary for your ISP connection. S\
ee Change the 
MTU Size on page  40.
6.  Select an IPv6 Domain Name Server (DNS) 
 Address radio button:
• Get Automatically 
 from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address.
• Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’

s primary DNS server. If a secondary 
DNS server address is available, enter it also.
7.  Select an IP 
 Address Assignment radio button:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting. 
						

							Specify Your Internet Settings 
33  AC1750 Smart WiFi Router
This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN). 
8. (Optional) Select the Use This Interface ID check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
9. Click the Apply button.
Your settings are saved.
Set Up an IPv6 6to4 Tunnel Internet Connection
The remote relay router is the router to which your router creates a 6to4 tunnel. Make sure 
that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the 
IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. In the Internet Connection Type menu, select 6to4 Tunnel. 
						

							Specify Your Internet Settings 34
AC1750
 Smart  WiFi Router 
The page adjusts:
The router automatically detects the information in the Router’s IPv6 Address on LAN 
field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The 
number after the slash (/) is the length of the prefix, which is also \
indicated by the 
underline (_) under the IPv6 address. If no address is acquired, the f\
ield displays Not 
Available.
6.  Select a Remote 6to4 relay Router radio button:
• Auto. 
Your router uses any remote relay router that is available on the Interne\
t. This is 
the default setting.
• Static IP 
 Address. Enter the static IPv4 address of the remote relay router. Your IPv6 
ISP usually provides this address.
7.  Select an IPv6 Domain Name Server (DNS) 
 Address radio button:
• Get Automatically 
 from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address.
• Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’

s primary DNS server. If a secondary 
DNS server address is available, enter it also.
8.  Select an IP 
 Address Assignment radio button:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devi\
ces on your home  network (the LAN). 
9.  (Optional) Select the  Use This Interface ID  check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’
 s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address. 
						

							Specify Your Internet Settings 
35  AC1750 Smart WiFi Router
10. Click the Apply button.
Your settings are saved.
Set Up an IPv6 Pass Through Internet Connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and 
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. In the Internet Connection Type menu, select Pass Through.
The page adjusts, but no additional fields display.
6. Click the Apply button.
Your settings are saved.
Set Up an IPv6 Fixed Internet Connection
To set up a fixed IPv6 Internet connection:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays. 
						

							Specify Your Internet Settings 36
AC1750
 Smart  WiFi Router 
5. In the Internet Connection Type menu, select Fixed.
6. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix 
 Length. The IPv6 address and prefix length of the router WAN 
interface.
• Default IPv6 Gateway . 
 The IPv6 address of the default IPv6 gateway for the router’s 
WAN interface.
• Primary DNS Server . 
 The primary DNS server that resolves IPv6 domain name 
records for the router.
• Secondary DNS Server . 
 The secondary DNS server that resolves IPv6 domain 
name records for the router.
Note: If you do not specify the DNS servers, the router uses the DNS servers 
that are configured for the IPv4 Internet connection on the Internet 
Setup page. (See Manually Set Up the Internet Connection on 
page   23.)
7.  Select an IP 
 Address Assignment radio button:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devi\
ces on your home  network (the LAN). 
8.  In the IPv6 Address/Prefix 
 Length fields, specify the static IPv6 address and prefix length 
of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address.
9.  Click the  Apply button.
Your settings are saved. 
						

							Specify Your Internet Settings 37
 AC1750
 Smart  WiFi Router
Set Up an IPv6 DHCP Internet Connection
To set up an IPv6 Internet connection with a DHCP server:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login window opens.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4.  Select  ADV
 ANCED > Advanced Setup > IPv6 .
The IPv6 page displays.
5.  In the Internet Connection T
 ype menu, select DHCP .
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length 
of the prefix, which is also indicated by the underline (_) under the \
IPv6 address. If no 
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. I\
f no address is 
acquired, the field displays Not Available.
6.  Select an IPv6 Domain Name Server (DNS) 
 Address radio button:
• Get Automatically 
 from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address. 
						

							Specify Your Internet Settings 
38 AC1750 Smart WiFi Router 
•Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary 
DNS server address is available, enter it also.
7. (Optional) In the User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name, 
enter it here.
8. (Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for the 
IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz 
as the domain name. If your ISP provided a domain name, type it in this field. For 
example, Earthlink Cable might require a host name of home, and Comcast sometimes 
supplies a domain name.
9. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
•Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN). 
10. (Optional) Select the Use This Interface ID check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
11. Click the Apply button.
Your settings are saved.
Set Up an IPv6 PPPoE Internet Connection
To set up a PPPoE IPv6 Internet connection:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays. 
						

							Specify Your Internet Settings 39
 AC1750
 Smart  WiFi Router
5. In the Internet Connection Type  menu, select PPPoE.
6. Enter the settings that your service provider gave you.
If your service provider gave you only one user name and password, the s\
ervice provider 
most likely supports dual stack PPPoE (a single PPP session). If the s\
ervice provider 
gave you two user names and passwords for IPv4 and IPv6, then the router\
 must use 
dif

ferent PPP session. 
• T
o use separate PPP sessions (the default setting), leave the Use the same Login 
information as IPv4 PPPoE  check box cleared and complete the PPP Login and 
Password fields. 
• T
o use a single PPP session to establish the IPv4 and IPv6 Internet conne\
ction, 
select the Use the same Login information as IPv4 PPPoE check box.
The page adjusts and the router automatically detects the information in\
 Router
 ’s 
IPv6 Address on WAN  field. Go to Step 10.
Note: If you do not see the Use the same Login information as IPv4 
PPPoE check box, make sure that PPPoE is selected from the 
Internet Service Provider menu on the Internet Setup page. For 
more information, see Specify an Internet Connection That Uses a 
Login on page  25.
The  Router
 ’s IPv6 Address on WAN field shows the IPv6 address that is acquired for 
the router’s WAN (or Internet) interface. The number after the slash (/) is the length of the 
prefix, which is also indicated by the underline (_) under the IPv6 ad\
dress. If no address 
is acquired, the field displays Not Available.
The  Router
 ’s IPv6 Address on LAN field shows the IPv6 address that is acquired for 
the router’s LAN interface. The number after the slash (/) is the length of the prefix, which 
is also indicated by the underline (_) under the IPv6 address. If no a\
ddress is acquired, 
the field displays Not Available.
7.  In the Login field, enter the login information for the ISP connection. 
						

							Specify Your Internet Settings 
40 AC1750 Smart WiFi Router 
This is usually the name that you use in your email address. For example, if your main 
mail account is [email protected], you would type JerAB in this field. Some ISPs (like 
Mindspring, Earthlink, and T-DSL) require that you use your full email address when you 
log in. If your ISP requires your full email address, type it in this field.
8. In the Password field, enter the password for the ISP connection.
9. In the Service Name field, enter a service name.
If your ISP did not provide a service name, leave this field blank.
Note:The default setting of the Connection Mode menu is Always On to 
provide a steady IPv6 connection. The router never terminates the 
connection. If the connection is terminated, for example, when the 
modem is turned off, the router attempts to reestablish the connection 
immediately after the PPPoE connection becomes available again.
10. Select an IPv6 Domain Name Server (DNS) Address radio button:
•Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your 
ISP automatically assigns this address.
•Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary 
DNS server address is available, enter it also.
11. Select an IP Address Assignment radio button:
•Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
•Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN). 
12. (Optional) Select the Use This Interface ID check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
13. Click the Apply button.
Your settings are saved.
Change the MTU Size
The maximum transmission unit (MTU) is the largest data packet a network device transmits. 
When one network device communicates across the Internet with another, the data packets 
travel through many devices along the way. If a device in the data path uses a lower MTU 
setting than the other devices, the data packets must be split or “fragmented” to 
accommodate the device with the smallest MTU.