Netgear R6220 Ac1200 Smart Wifi Router With External Antennas User Manual

							91
9
9.   Manage Your Network
This chapter describes the router settings for administering and maintaining your router and 
home network. 
This chapter includes the following sections:
•Update the Router Firmware 
•Change the admin Password 
•Recover the admin Password 
•View Router Status 
•View and Manage Logs of Router Activity 
•Monitor Internet Traffic 
•Custom Static Routes 
•View Devices Currently on the Network 
•Manage the Router Configuration File 
•Remote Management  
						

							Manage Your Network 
92 AC1200 Smart WiFi Router with External Antennas 
Update the Router Firmware
The router firmware (routing software) is stored in flash memory. You might see a message at 
the top of the genie screens when new firmware is available. You can respond to that 
message to update the firmware or you can check to see if new firmware is available and 
update your product. 
To check for new firmware and update your router:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Firmware Update. 
The Router Update screen displays.
5. Click the Check button.
The router finds new firmware information if any is available and displays a message 
asking if you want to download and install it.
6. Click the Ye s button.
The router locates and downloads the firmware and begins the update. 
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the 
update. For example, do not close the browser, click a link, or load a 
new page. Do not turn off the router.
When the upload is complete, your router restarts. The update process typically takes 
about one minute. Read the new firmware release notes to find out if you need to 
reconfigure the router after updating. 
						

							Manage Your Network 93
 AC1200 Smart WiFi Router with External Antennas
Change the admin Password
This feature let you change the default password that is used to log in \
to the router with the 
user name admin. This password is not the one that you use for WiFi access.
Note: Be sure to change the password for the user name admin to a secure 
password. The ideal password contains no dictionary words from any 
language and contains uppercase and lowercase letters, numbers, 
and symbols. It can be up to 30 characters.
To set the password for the user name admin:
1. Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration > Set Password.
5. Type the old password, and type the new password twice.
6.  T
o be able to recover the password, select the  Enable Password Recovery check box.
NETGEAR recommends that you enable password recovery.
7.  Click the  Apply button.
Your changes take effect.
Recover the admin Password
NETGEAR recommends that you enable password recovery if you change the p\
assword for 
the router user name admin. Then you can recover the password if it is forgotten. This  
						

							Manage Your Network 
94 AC1200 Smart WiFi Router with External Antennas 
recovery process is supported in Internet Explorer, Firefox, and Chrome browsers but not in 
the Safari browser.
To set up password recovery:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password screen displays.
5. Select the Enable Password Recovery check box.
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your changes are saved.
To recover your password:
1. In the address field of your browser, type www.routerlogin.net.
A login screen displays. 
2. Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the 
router.
The serial number is on the product label.
3. Enter the serial number of the router.
4. Click the Continue button.
A screen displays requesting the answers to your security questions.
5. Enter the saved answers to your security questions.  
6. Click the Continue button.
A screen displays your recovered password.
7. Click the Login again button.
A login screen displays.
8. With your recovered password, log in to the router. 
						

							Manage Your Network 95
 AC1200 Smart WiFi Router with External Antennas
View Router Status
To view router status and usage information:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Click the  ADV
 ANCED tab.
Scroll to view 
guest network 
information
 
5.  For information about the displayed settings, click the  Show/Hide Help Center link at the 
bottom of the screen.
Display Internet Port Statistics
To display Internet port statistics:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network. 
						

							Manage Your Network 96
AC1200 Smart WiFi Router with External Antennas 
2. 
Type  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
4.  The BASIC Home screen displays
5.  Click the  ADV
 ANCED tab. 
The ADVANCED Home screen displays.
6.  In the Internet Port pane, click the Show Statistics button.
The following information displays:
• System Up T
 ime. The time elapsed since the router was last restarted.
• Port. 
The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, 
the screen displays the following information:
- Status. 
 The link status of the port.
- TxPkts. 
 The number of packets transmitted on this port since reset or manual 
clear.
- RxPkts. 
 The number of packets received on this port since reset or manual clear.
- Collisions. 
 The number of collisions on this port since reset or manual clear.
- Tx B/s. 
 The current transmission (outbound) bandwidth used on the WAN and 
LAN ports.
- Rx B/s. 
 The current reception (inbound) bandwidth used on the WAN and LAN 
ports.
- Up T
ime. The time elapsed since this port acquired the link.
-Poll Interval. 
 The interval at which the statistics are updated in this screen. 
7.  T
o change the polling frequency, enter a time in seconds in the  Poll Interval field and click 
the  Set Interval button. 
To stop the polling entirely, click the  Stop button. 
						

							Manage Your Network 97
 AC1200 Smart WiFi Router with External Antennas
Check the Internet Connection Status
To check the Internet connection status:
1. 
Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Click the  ADV
 ANCED tab.
The ADVANCED Home screen displays.
5.  In the Internet Port pane, click the Connection Status button. 
The following information displays:
• IP Address. 
 The IP address that is assigned to the router.
• Subnet Mask. 
 The subnet mask that is assigned to the router.
• Default Gateway . 
 The IP address for the default gateway that the router 
communicates with.
• DHCP Server . 
 The IP address for the Dynamic Host Configuration Protocol server 
that provides the TCP/IP configuration for all the computers that are connected to the 
router.
• DNS Server . 
 The IP address of the Domain Name Service server that provides 
translation of network names to IP addresses.
• Lease Obtained. 
 The date and time when the lease was obtained.
• Lease Expires. 
 The date and time that the lease expires.
6.  T
o return the status of all items to 0, click the Release button. 
7. T
o refresh the screen, click the Renew  button. 
8.  T
o exit the screen, click the Close Window button. 
						

							Manage Your Network 98
AC1200 Smart WiFi Router with External Antennas 
View and Manage Logs of Router Activity
The log is a detailed record of the websites you accessed or attempted t\
o access and other 
router actions. Up to 256
  entries are stored in the log.
To view and manage logs:
1. Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration > Logs.
5. To customize the logs, scroll down and clear or select the check boxes.
6.  T
o refresh the log screen, click the  Refresh button.
7.  T
o clear the log entries, click the  Clear Log button.
8.  T
o email the log immediately, click the  Send Log button. 
						

							Manage Your Network 99
 AC1200 Smart WiFi Router with External Antennas
Monitor Internet Traffic
Traffic metering allows you to monitor the volume of Internet traffic that passes through the 
router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Traffic Meter .
Scroll to view 
more settings
5. Select the Enable Traffic Meter  check box.
6.  (Optional) Control the volume of Internet traf
 fic.
You can use either the traffic volume control feature or the connection time control  feature:
• Select the T
 raffic volume control by radio button and then select one of the 
following options:
- No Limit. No restriction is applied when the traf
 fic limit is reached.
- Download only . 
 The restriction is applied to incoming traffic only.
- Both Directions. 
 The restriction is applied to both incoming and outgoing traffic. 
						

							Manage Your Network 
100 AC1200 Smart WiFi Router with External Antennas 
•Select the Connection time control radio button and enter the allowed hours in the 
Monthly limit field.
7. (Optional) If your ISP charges for extra data volume when you make a new connection, 
enter the extra data volume in MB in the Round up data volume for each connection by 
field.
8. In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
If you want the traffic counter to start immediately, click the Restart Counter Now button.
9. In the Traffic Control section, specify whether the router should issue a warning message 
before the monthly limit of Mbytes or hours is reached. 
By default, the value is 0 and no warning message is issued. You can select one of the 
following to occur when the limit is attained:
•The Internet LED blinks. 
•The Internet connection is disconnected and disabled.
10. Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
11. To update the Traffic Statistics section, click the Refresh button.
12. To display more information about the data traffic on your router and to change the poll 
interval, click the Traffic Status button.
Custom Static Routes
Typically, you do not need to add static routes unless you use multiple routers or multiple IP 
subnets on your network.
As an example of when a static route is needed, consider the following case:
•Your main Internet access is through a cable modem to an ISP.
•Your home network includes an ISDN router for connecting to the company where you 
are employed. This router’s address on your LAN is 192.168.1.100.
•Your company’s network address is 134.177.0.0.
When you set up your router, two implicit static routes were created. A default route was 
created with your ISP as the gateway, and a second static route was created to your local 
network for all 192.168.1.x addresses. With this configuration, if you try to access a device on 
the 134.177.0.0 network, your router forwards your request to the ISP. The ISP forwards your 
request to the company where you are employed, and the company firewall is likely to deny 
the request.
In this case you must define a static route, telling your router to access 134.177.0.0 through 
the ISDN router at 192.168.1.100. Here is an example:
•The Destination IP Address and IP Subnet Mask fields specify that this static route 
applies to all 134.177.x.x addresses.