Netgear R6200v2 Smart Wifi Router Ac1200 Dual Band Gigabit User Manual

Hardware Setup11
 R6200v2 Smart WiFi Router
Label
The label on the router shows the login information, MAC address, and se\
rial number. 
Serial number and
Preset WiFi Default access information
passwordMAC address
Figure 4. The label shows unique information about your router
Position Your Router
The router lets you access your network from anywhere within the operati\
ng range of your 
wireless network. However, the operating distance or range of your wireless connection can 
vary significantly...

12
2
2.   Getting Started
Connecting to the router
This chapter explains how to use NETGEAR genie to set up your router after you complete 
cabling as described in the installation guide.
This chapter contains the following sections:
•Router Setup Preparation 
•Login and Access 
•NETGEAR genie Setup 
•Use NETGEAR genie After Installation 
•Upgrade the Firmware 
•Dashboard (BASIC Home Screen) 
•Join Your Wireless Network 
•NETGEAR genie App and Mobile genie App  

Getting Started
13  R6200v2 Smart WiFi Router
Router Setup Preparation
You can set up your router with the NETGEAR genie automatically, or you can use the genie 
menus and screens to set up your router manually. Before you start the setup process, get 
your ISP information and make sure the computers and devices in the network have the 
settings described here.
Use Standard TCP/IP Properties for DHCP
If you set up your computer to use a static IP address, change the settings so that it uses 
Dynamic Host...

Getting Started14
R6200v2 Smart WiFi Router 
NETGEAR genie Setup
NETGEAR genie runs on any device with a web browser. Installation with basic setup takes 
about 15  
minutes to complete. 
To use NETGEAR genie to set up your router:
1.T
urn the router on by pressing the  On/Off button. 
2. Make sure that your computer or wireless device is connected to the  router with an Ethernet 
cable (wired) or wirelessly with the preset security settings listed o\
n the bottom label.
3. Launch your Internet browser...

Getting Started
15  R6200v2 Smart WiFi Router
If the router does not connect to the Internet:
1.Review your settings. Make sure that you have selected the correct options and typed 
everything correctly. 
2.Contact your ISP and verify that you have the correct configuration information.
3.Read Chapter 10, Troubleshooting. If problems persist, register your NETGEAR product and 
contact NETGEAR technical support.
Use NETGEAR genie After Installation
When you first set up your router, NETGEAR genie...

Getting Started16
R6200v2 Smart WiFi Router 
Dashboard (BASIC Home Screen)
The router BASIC Home screen has a dashboard that lets you see the statu\
s of your Internet 
connection and network at a glance. You can click any of the six sections of the dashboard to 
view and change the settings. The left column has menus. You can use the ADVANCED tab 
to access more menus and screens.
Menus 
(Click the 
ADVANCED 
tab to view 
more) LanguageDashboard 
(Click to 
view details)
Figure 5. Basic Home screeN
•...

Getting Started
17  R6200v2 Smart WiFi Router
Join Your Wireless Network
You can use the manual or the WPS method to join your wireless network. For instructions 
about how to set up a guest network, see 
Set Up a Guest Network on page 28.
Manual Method
With the manual method, choose the network that you want and type its password to 
connect.
To connect manually:
1.On your computer or wireless device, open the software that manages your wireless 
connections. 
This software scans for all wireless...

Getting Started18
R6200v2 Smart WiFi Router 
NETGEAR genie App and Mobile genie App
The genie app is the easy dashboard for managing, monitoring, and repair\
ing your home 
network. For information about the genie apps, see the NETGEAR genie App User Manual  .
MenuLanguage
Support
Dashboard 
(Click to 
view 
details)
Retrieve wireless password
About genie
Figure 6. genie app dashboard
The genie app can help you with the following:
• Automatically repair common wireless network problems.
• Have easy...

19
3
3.   Basic Settings
Your Internet connection and WiFi network
This chapter describes the steps in setting up the router using genie. This chapter contains the 
following sections:
•Internet Setup 
•Parental Controls 
•Basic Wireless Settings 
•Set Up a Guest Network 
•View Attached Devices 
For information about the ReadySHARE feature on the BASIC Home tab, see Chapter 5, USB 
Storage and Chapter 6, ReadySHARE Printer. 

Basic Settings20
R6200v2 Smart WiFi Router 
Internet Setup
The Internet Setup screen is where you view or change basic ISP informat\
ion.
Note:
You can use the Setup Wizard to detect the Internet connection and 
automatically set up the router. See Internet Connection Setup 
Wizard on page   31.
To view or change the basic Internet setup:
1.Log in to the router (see  Use NETGEAR genie After Installation  on page  15). 
The BASIC Home screen displays.
2. Select  Internet .
Scroll to 
view more 
settings