Netgear R6050 Ac750 Dual Band Wifi Gigabit Router User Manual

Specify Network Settings 41
 AC750 Wireless Dual Band Gigabit Router R6050
Reserve LAN IP Addresses
When you specify a reserved IP address for a computer on the LAN, that c\
omputer always 
receives the same IP address each time it accesses the router’s DHCP server. Assign 
reserved IP addresses to computers or servers that require permanent IP \
settings. 
To reserve an IP address: 
1. 
Launch a web browser from a computer or WiFi device that is connected to\
 the network.
2.  Enter  http://www...

Specify Network Settings 42
AC750 Wireless Dual Band Gigabit Router R6050 
To edit a reserved address entry:
1. 
Launch a web browser from a computer or WiFi device that is connected to\
 the network.
2.  Enter  http://www
 .routerlogin.net or http://www.routerlogin.com .
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED...

Specify Network Settings 43
 AC750 Wireless Dual Band Gigabit Router R6050
4. 
Select  ADVANCED > Setup > LAN Setup .
5. Select the radio button next to the reserved address. 
6.  Click the  Delete button.
The address is removed.
Use the WPS Wizard for WiFi Connections
The WPS Wizard helps you add a wireless computer or device to your WiFi \
network without  typing the WiFi password.
To use the WPS Wizard:
1.  Launch a web browser from a computer or WiFi device that is connected to\
 the network.
2....

Specify Network Settings 44
AC750 Wireless Dual Band Gigabit Router R6050 
4. 
Select  ADVANCED > WPS Wizard .
5. Click the  Next button. 
6. Select the setup method that you want to use: 
• Push button. Click the WPS button on this screen. 
• PIN Number . 
 The screen adjusts. Enter the client security PIN, and click  the Next 
button.
7.  Within two minutes, go to the client device and use its WPS software to \
connect to the WiFi 
network.
The WPS process automatically sets up your wireless computer...

Specify Network Settings 
45  AC750 Wireless Dual Band Gigabit Router R6050
To specify WPS settings:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup >...

Specify Network Settings 46
AC750 Wireless Dual Band Gigabit Router R6050 
A login screen displays.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Wireless AP . 
5. Select the  Enable AP Mode check box. 
6. (Optional) Select the  Enable fixed IP settings on this device  check box.
NETGEAR recommends that you do not use this...

Specify Network Settings 47
 AC750 Wireless Dual Band Gigabit Router R6050
•
Primary DNS . The IP address of your ISP’s primary DNS server.
• Secondary DNS . 
 The IP address of your ISP’s secondary DNS server.
8.  Click the  Apply button.
The IP address of the router changes, and you are disconnected.
9.  T
o reconnect, close and restart your browser and enter  www.routerlogin.net.
Wireless Distribution System
You can set up the router to be used as a wireless base station or wirele\
ss repeater in a...

Specify Network Settings 
48 AC750 Wireless Dual Band Gigabit Router R6050 
computers. To configure this mode, you must know the MAC address of the child 
repeater access point.
•Wireless repeater. The router sends all traffic from its local wireless or wired computers 
to a remote access point. To configure this mode, you must know the MAC address of the 
remote parent access point. 
For you to set up a WiFi network in a WDS, the following conditions must be met for both 
access points:
•Both access...

Specify Network Settings 49
 AC750 Wireless Dual Band Gigabit Router R6050
6. 
Select the Wireless Base Station  radio button.
7. To prevent wireless clients from associating with the base station and al\
low LAN client 
associations only, select the  Disable Wireless Client Association  check box.
You can leave the check box cleared if you prefer wireless clients to be \
able to associate  with the base stations.
8.  In the Repeater MAC 
 Address 1 through 4 fields, enter the MAC addresses for the...

Specify Network Settings 50
AC750 Wireless Dual Band Gigabit Router R6050 
The user name is 
admin. The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Wireless Repeating Function. 
The Wireless Repeating Function screen displays. The wireless MAC address of the  router displays onscreen.
5.  Select the  Enable W
 ireless Repeating Function check box. 
6.  Select the  W
 ireless Repeater radio...