Netgear R6050 Ac750 Dual Band Wifi Gigabit Router User Manual

Troubleshooting 
151  AC750 Wireless Dual Band Gigabit Router R6050
•Your ISP might check for your computer’s host name. 
Assign the computer host name of your ISP account as the account name in the Internet 
Setup screen.
•Your ISP allows only one Ethernet MAC address to connect to Internet and might check 
for your computer’s MAC address. In this case, do one of the following:
-Inform your ISP that you have bought a new network device, and ask them to use the 
router’s MAC address.
-Configure your...

Troubleshooting 
152 AC750 Wireless Dual Band Gigabit Router R6050 
The BASIC Home screen displays.
4. Click the ADVANCED tab.
The Router Status screen displays.
5. On the Internet Port pane, click the Connection Status button.
For more information, see View the Internet Connection Status on page 81. If the fields 
show valid information, including valid IP addresses, your PPPoE connection is up and 
working.
If any of the fields show incomplete information or no valid IP address, you can attempt to...

Troubleshooting 
153  AC750 Wireless Dual Band Gigabit Router R6050
Request timed out
If the path is not functioning correctly, you might have one of the following problems:
•Wrong physical connections
For a wired connection, make sure that the numbered Ethernet port LED is lit for the port 
to which you are connected.
Check that the appropriate LEDs are on for your network devices. If your router and 
computer are connected to a separate Ethernet switch, make sure that the link LEDs are 
lit for the...

Troubleshooting 
154 AC750 Wireless Dual Band Gigabit Router R6050 
single computer connected to that modem. If this is the case, configure your router to clone or 
spoof the MAC address from the authorized computer. 
Troubleshoot IP Addresses
By default, the router is set up to automatically assign IP addresses to network clients. The 
router’s IP address is 192.168.1.1 unless you changed it. Wired and wirelessly connected 
computers must have network IP addresses on the same network as the router. The...

155
A
A.   Supplemental Information
This appendix provides factory default settings and technical specifications for the router.
•Factory Default Settings 
•Technical Specifications  

 Supplemental Information
156 AC750 Wireless Dual Band Gigabit Router R6050 
Factory Default Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object 
to press and hold the Restore Factory Settings button on the router for at least seven 
seconds. The router resets, and returns to the factory configuration settings shown in the 
following table.
Table 3.  Router default settings  
FeatureDefault Setting
Router login URLhttp://www.routerlogin.net or...

 Supplemental Information157
 AC750 Wireless Dual Band Gigabit Router R6050
Technical Specifications
Table 4.  Router technical specifications 
 
FeatureSpecification
Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, and 
UPnP
Power adapter • North 
America: 110V, 60 Hz, input
• UK, Australia: 
 240V,  50  Hz,  input
•  Europe: 230V
 , 50 Hz, input
•  China: 220V
 , 60 Hz, input
•  All regions: 12 VDC @ 1.5A, output
Dimensions 217.74 x 147.73 x 34.92 mm
8.57 x 5.81...