Netgear Push2tv Manual

21
4
4.   Change the Intel WiDi Settings
After you install the Push2TV adapter, you can adjust the Intel Wireless\
 WiDi. The chapter contains the following sections: •Configure the Intel WiDi Properties
• Adjust the Sound
• Configure the Autoconnect Option
• Configure Your Laptop to Display 1080p Resolution
• Reset the Intel WiDi Settings 

Change the Intel WiDi Settings22
Push2TV Wireless Display Adapter PTV3000 
Configure the Intel WiDi Properties
The Properties button is available on the WiDi Connected adapter screen \
only when Intel 
WiDi is connected to an adapter. The Intel Wireless Display properties screen has two tabs: 
Behavior and Adapter.
Multiple versions of Intel WiDi software exist, each with a slightly dif\
ferent look and feel. The 
precise steps in the following procedure might dif fer for dif

ferent Intel WiDi software...

Change the Intel WiDi Settings23
 Push2TV Wireless Display Adapter PTV3000
4.
Click the Properties button.
The Behavior tab is selected automatically and the following screen disp\
lays:
5. (Optional) Configure the following options:
•Automatically hide the Intel W ireless Display application after connecting . This 
option allows the application to minimize right after the Push2TV adapte\
r has 
connected to the 

TV. 

Change the Intel WiDi Settings24
Push2TV Wireless Display Adapter PTV3000 
•
Don’t ask me again options. You can select the following check boxes to stop 
warnings and prompts from displaying:
-     Don’t warn me that the connection will end if I close the application\
 while 
connected.
-     Don’t prompt me to upgrade the firmware.
-     Don’t prompt me to download software updates.
• Change how the mouse pointer appears on the TV .
-     Show the pointer on the TV . 
This option is selected by...

Change the Intel WiDi Settings25
 Push2TV Wireless Display Adapter PTV3000
2.
Select the Push2TV adapter.
3. Click the Connect button.
Intel WiDi connects to the Push2TV adapter.
4.Click the Properties button.
5. Click the  Adapter tab.
The following screen displays: 

Change the Intel WiDi Settings26
Push2TV Wireless Display Adapter PTV3000 
The following fields are displayed for information only:
• Network address. The IP address.
•Adapter ID. A preset and unchangeable number set by the adapter.
• Adapter manufacturer . NETGEAR.
• Adapter model. 
 The model of the adapter that is connected.
• Adapter hardware version. 
 The version of the hardware.
• Adapter firmware version. 
 The version of the application.
6. (Optional) Configure the following options:
• Adapter...

Change the Intel WiDi Settings27
 Push2TV Wireless Display Adapter PTV3000
Note:
 
For more information about audio, see the following section,  Adjust the 
Sound .
d. Click the OK button.
The previous screen displays.
9. Click the  OK button.
The new settings are saved, the screen closes, ad the Connected adapter \
screen  displays again.
Adjust the Sound
When a Push2TV adapter connection from the laptop to the TV begins, the laptop’s sound is 
muted. When the connection ends, the laptop’s sound is...

Change the Intel WiDi Settings28
Push2TV Wireless Display Adapter PTV3000 
A global volume control pop-up window displays. 
2. Click the  Mixer link at the bottom.
Change the Sound Using the Windows Control Panel
Using the audio device windows is another way to manage the sound on the\
 laptop.
To bring up the audio device window:
1.On your laptop, click the Windows  Start button.
2. In the search field, type  audio device.
3. Press the Enter key
 . 
Configure the Autoconnect Option
You can use the...

Change the Intel WiDi Settings29
 Push2TV Wireless Display Adapter PTV3000
7.
Click the OK button.
The new settings are saved.
Configure Your Laptop to Display 1080p Resolution
To experience Intel WiDi in full HD 1080p resolution on your TV, you need to have an 1080p  HDTV and one of the following:
• A laptop with a 1920 x1080 panel in clone mode.
• A laptop that is based on the Intel Huron River platform (or faster) in extend or remote only 
mode.
Before you connect to the Push2TV adapter, the laptop...

Change the Intel WiDi Settings30
Push2TV Wireless Display Adapter PTV3000 
The screen that displays lets you change the appearance of your display:\
4.
From the Multiple Displays list, select  Extend these displays.
Screen 1 (the laptop) is reset to its default resolution of 1280 x 800\
 (or 1366 x 768), and 
screen 2 (the  TV) remains at 1280 x 720 resolution.
5.Click screen 2.
6. For the Resolution settings, select  1920 x 1080. 
Now the TV displays full 1080p resolution.